1968 Morris Minor Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 26 ignition parts for the 1968 Morris Minor, across 6 part types, covering all 5 engine options (1.1L L4, 1.3L L4, 848cc L4, 970cc L4 and 998cc L4). Every part shows its brand, manufacturer part number and fitment notes.

The ignition system on the 1968 Morris Minor delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Spark Plug (12 parts), Ignition Coil (9 parts) and Condenser / Capacitor (2 parts). The other 3 part types cover the remaining 3 parts.

Condenser / Capacitor

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.3L L4, 970cc L4, 998cc L4 LU206T
🇺🇸 US
T-Series
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.3L L4, 970cc L4, 998cc L4 LU206
🇺🇸 US
View on
Amazon

This table covers the capacitors used in this electrical or A/C circuit.

Distributor Rotor

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.3L L4, 970cc L4, 998cc L4 LU300
🇺🇸 US
View on
Amazon

This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.

Ignition Breaker Points

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.3L L4, 970cc L4, 998cc L4 LU1617P
🇺🇸 US
View on
Amazon

This table covers the breaker points in a points-type distributor.

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 UC15T
🇺🇸 US
T-Series
View on
Amazon
FVP Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 UC15F
🇺🇸 US
View on
Amazon
HOLSTEIN Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 2IGC0058
🇺🇸 US
View on
Amazon
SKP Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 SKUC15T
🇺🇸 US
Coil Pack
View on
Amazon
SPECTRA PREMIUM Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 C622
🇺🇸 US
Pack
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Popular Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 UC15
🇺🇸 US
View on
Amazon
UNITED MOTOR PRODUCTS Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 C15
🇺🇸 US
View on
Amazon
WALKER PRODUCTS Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 9201041
🇺🇸 US
Single Coil
View on
Amazon
WELLS Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Ignition Conversion Kit

Brand Part Number Markets Notes Buy
WELLS Fits: 1.3L L4, 848cc L4, 970cc L4, 998cc L4 1A4147
🇺🇸 US
with Lucas Distributor # 25D412 Volt
Fitment notes — WELLS 1A4147
with Lucas Distributor # 25D412 VoltNegative Ground
View on
Amazon

This table covers the Ignition Conversion kits.

Spark Plug

Summary: Notes include pre-set gaps of 0.024", 0.025", 0.026", 0.032", 0.034", 0.035" and 0.041". Replacement brands in this table include ACDELCO, CHAMPION and AUTOLITE.

Copper / Nickel

Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 1.3L L4, 998cc L4, 970cc L4 R42XLS
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R42XLS
ProfessionalConventionalPre-Set Gap: 0.035"
Original Equipment-Recommended Gap: .025
View on
Amazon
CHAMPION Popular Fits: 1.3L L4, 998cc L4 120
🇺🇸 US
Copper PlusPre-Set Gap: 0.026"
Fitment notes — CHAMPION 120
Copper PlusPre-Set Gap: 0.026"
OE TypeOE-Recommended Gap: 0.025"Non-Resistor Plug
View on
Amazon
CHAMPION Fits: 1.3L L4, 998cc L4 123
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 123
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.025"Resistor Plug
View on
Amazon

Double Platinum (lasts up to 3x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.3L L4 41804
🇺🇸 US 🇨🇦 CA
ProfessionalDouble Platinum
Fitment notes — ACDELCO 41804
ProfessionalDouble PlatinumPre-Set Gap: 0.035"
OE-Recommended Gap: 0.025"
View on
Amazon

Iridium (lasts up to 4x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
AUTOLITE Fits: 1.3L L4, 970cc L4, 998cc L4 XP63
🇺🇸 US
Iridium XPDisplay Pack
Fitment notes — AUTOLITE XP63
Iridium XPDisplay PackQTY2Pre-Set Gap: 0.032"
Gap .025 (In) 0.6 (mm)
View on
Amazon
SKP Fits: 1.3L L4, 970cc L4, 998cc L4 SP1041
🇺🇸 US
Tapered Ground Electrode with Platinum Chip
Fitment notes — SKP SP1041
Tapered Ground Electrode with Platinum Chip
Gap: .025
View on
Amazon

Platinum (lasts up to 2x longer than Copper / Nickel)

Brand Part Number Markets Notes Buy
ACDELCO Fits: 1.3L L4 4
🇺🇸 US 🇨🇦 CA
ProfessionalRapidfire
Fitment notes — ACDELCO 4
ProfessionalRapidfirePre-Set Gap: 0.041"
OE-Recommended Gap: 0.025" (IN)
View on
Amazon
Brand Part Number Markets Notes Buy
ACDELCO Popular Fits: 848cc L4 R44XL
🇺🇸 US 🇨🇦 CA
ProfessionalConventional
Fitment notes — ACDELCO R44XL
ProfessionalConventionalPre-Set Gap: 0.034"
Original Equipment-Recommended Gap: .025
View on
Amazon
AUTOLITE Fits: 848cc L4 404
🇺🇸 US
Copper ResistorPre-Set Gap: 0.034"
Fitment notes — AUTOLITE 404
Copper ResistorPre-Set Gap: 0.034"
Gap .025 (In) 0.6 (mm)OE Style
View on
Amazon
CHAMPION Fits: 848cc L4 120
🇺🇸 US
Copper PlusPre-Set Gap: 0.026"
Fitment notes — CHAMPION 120
Copper PlusPre-Set Gap: 0.026"
OE TypeOE-Recommended Gap: 0.024"Non-Resistor Plug
View on
Amazon
CHAMPION Fits: 848cc L4 123
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 123
Copper PlusPre-Set Gap: 0.025"
OE-Recommended Gap: 0.024"Resistor Plug
View on
Amazon
MOTORCRAFT Fits: 848cc L4 SP466
🇺🇸 US
Copper
Fitment notes — MOTORCRAFT SP466
Copper
OE Style.025"/0.6mm
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1968 Morris Minor

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1968 Morris Minor?

Our catalog currently lists 26 ignition parts for the 1968 Morris Minor across 6 subcategories and 12 brands, covering all 5 engine options (1.1L L4, 1.3L L4, 848cc L4, 970cc L4 and 998cc L4). Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1968 Morris Minor engines?

Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of ignition problems on a 1968 Morris Minor?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1968 Morris Minor?

Notes on this page include pre-set gaps of 0.024", 0.025", 0.026", 0.032", 0.034", 0.035" and 0.041". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1968 Morris Minor was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1968 Morris Minor?

First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1968 Morris Minor

Ignition Parts for Other Morris Minor Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.