2011 Nissan Maxima Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — FOUR SEASONS 70065.

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Connector parts are listed for the 2011 Nissan Maxima, from GPD and STANDARD MOTOR PRODUCTS.

Part numbers include GPD 1712339 and STANDARD MOTOR PRODUCTS S2930.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 A/C Refrigerant Pressure Switch Connector parts for the 2011 Nissan Maxima come from 4 brands — FOUR SEASONS, GPD, STANDARD MOTOR PRODUCTS and 1 other brand.

Part numbers include FOUR SEASONS 37276, GPD 1712679 and STANDARD MOTOR PRODUCTS S2458, among others listed above.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies the 3 ABS Wheel Speed Sensor Connector parts for the 2011 Nissan Maxima.

Listed part numbers: STANDARD MOTOR PRODUCTS S2930, STANDARD MOTOR PRODUCTS S2948 and STANDARD MOTOR PRODUCTS S2967.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Accelerator Pedal Position Sensor Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2822 and WELLS 1P2685.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Alternator / Generator Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2533 and WELLS 1P4274.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S2945.

This table covers the harness connectors at the Battery Cable Junction Block. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: DORMAN 956140.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S3211.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Brake Light Switch Connector parts for the 2011 Nissan Maxima come from 4 brands — STANDARD MOTOR PRODUCTS, ROSTRA, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS S1519.

This group includes STANDARD MOTOR PRODUCTS S1519, ROSTRA 610128 and STANDARD MOTOR PRODUCTS HP4145 and the remaining parts above.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Camshaft Position Sensor Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2844, UNITED MOTOR PRODUCTS CON211 and WELLS 1P3595.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2844 and UNITED MOTOR PRODUCTS CON211.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S2994.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — WELLS 1P1032.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts are listed for the 2011 Nissan Maxima, from GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS.

This group includes GB REMANUFACTURING 5187, STANDARD MOTOR PRODUCTS S2330 and WELLS 1P4050.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S2993.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Tank Pressure Sensor Connector parts for the 2011 Nissan Maxima come from 2 brands — WALKER PRODUCTS and WELLS.

Listed part numbers: WALKER PRODUCTS 2701085 and WELLS 1P4056.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

3 Headlamp Wiring Harness / Connector parts for the 2011 Nissan Maxima come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS F90008, STANDARD MOTOR PRODUCTS LWH104 and STANDARD MOTOR PRODUCTS LWH106.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts are listed for the 2011 Nissan Maxima, from DORMAN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.

Listed part numbers: DORMAN 645787, STANDARD MOTOR PRODUCTS S2327 and WALKER PRODUCTS 2701085, plus the other parts above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2011 Nissan Maxima, from ULTRA-POWER and WALKER PRODUCTS.

Listed part numbers: ULTRA-POWER 2701085, plus the other parts above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2822.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3123.

This table covers the harness connectors at the On-Board Diagnostic (OBD) Port. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — WELLS 1P1474.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S3118.

This table covers the harness connectors at the Power Steering Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Power Steering Pressure Sensor Connector parts for the 2011 Nissan Maxima come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2458, UNITED MOTOR PRODUCTS CON205 and WELLS 1P4271.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S3220.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radio Connector parts for the 2011 Nissan Maxima come from METRA. The "Popular" part is METRA 707552.

Listed part numbers: METRA 707552, METRA AXBTHNIS and METRA AXBUCHNS, plus the other parts above.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts for the 2011 Nissan Maxima come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S2458, UNITED MOTOR PRODUCTS CON205 and WELLS 1P4271.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts are listed for the 2011 Nissan Maxima, from ULTRA-POWER and WALKER PRODUCTS.

Listed part numbers: ULTRA-POWER 2701096, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S2822.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Connector parts for the 2011 Nissan Maxima come from 2 brands — CURT and TEKONSHA.

Part numbers include CURT 56022 and TEKONSHA 118470.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Purge Valve / Solenoid Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2888 and WELLS 1P3372.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Vapor Canister Vent Valve / Solenoid Connector parts are listed for the 2011 Nissan Maxima, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S2888 and WELLS 1P3373.

This table covers the harness connectors at the Voltage Regulator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2533.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Nissan Maxima — STANDARD MOTOR PRODUCTS S2843.