2012 Nissan Titan Drivetrain Parts

This table covers the Axle shafts. Read more

6 Axle Shaft parts are listed for the 2012 Nissan Titan, from DANA and USA STANDARD GEAR. DANA 20060702 carries the "Popular" badge.

This group includes DANA 20060702, DANA 20059941 and DANA 20060701 and the remaining parts above.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Axle Shaft Bearing parts are listed for the 2012 Nissan Titan, from WJB / INMOTION PARTS, BCA, DANA and 2 other brands. WJB / INMOTION PARTS WRB228 carries the "Popular" badge.

In the Economy grade, WJB / INMOTION PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WRB228.

The Standard Replacement section lists 5 options from BCA, DANA, NATIONAL and 1 other brand — built to original-equipment specification. DANA 566063 is listed in this group.

This group includes WJB / INMOTION PARTS WRB228, WJB / INMOTION PARTS WRS268 and DANA 566063 and the remaining parts above.

This table covers the Axle Shaft Lock / Snap rings. Read more

One part is listed for the 2012 Nissan Titan — DANA 2002390.

This table covers the Axle Shaft Pilot bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2012 Nissan Titan — DANA 566131.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Axle Shaft Seal parts for the 2012 Nissan Titan come from 6 brands — WJB / INMOTION PARTS, DANA, NATIONAL and 3 other brands. The "Popular" part is DANA 52765.

Listed part numbers: DANA 52765, NATIONAL 710919 and SKF 16988A, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

8 CV Axle parts for the 2012 Nissan Titan come from 5 brands — GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. The "Popular" part is GSP NCV53595.

The Economy section: 1 option from CARDONE. CARDONE 606238 is listed in this group.

In the Heavy Duty grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: rated for severe service. A representative part number is GSP NCV53595XD.

Standard Replacement: 4 parts, from GSP, TOP NOTCH, APWI and 1 other brand. A representative part number is GSP NCV53595.

Listed part numbers: GSP NCV53595, CARDONE 606238 and GSP NCV53595XD, plus the other parts above.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2012 Nissan Titan come from 2 brands — BECK/ARNLEY and MEVOTECH.

Listed part numbers: BECK/ARNLEY 1032525, BECK/ARNLEY 1032882 and MEVOTECH DX262, plus the other parts above.

This table covers the carriers that hold the differential gears in the axle. Read more

4 Differential Carrier parts for the 2012 Nissan Titan come from 2 brands — DANA and USA STANDARD GEAR.

Heavy Duty: 1 part, from USA STANDARD GEAR. A representative part number is USA STANDARD GEAR USA26029.

Standard Replacement: 3 parts, from DANA. A representative part number is DANA 2016950.

This group includes USA STANDARD GEAR USA26029, DANA 2016950 and DANA 2006637 and the remaining parts above.

This table covers the bearings and races that support the differential carrier. Read more

18 Differential Carrier Bearing / Race parts for the 2012 Nissan Titan come from 7 brands — BCA, WJB / INMOTION PARTS, SKF and 4 other brands. The "Popular" part is WJB / INMOTION PARTS WTA37.

The Economy section: 4 options from WJB / INMOTION PARTS. WJB / INMOTION PARTS WTA37 is listed in this group.

Standard Replacement: 14 parts, from BCA, SKF, SCHAEFFLER and 3 other brands. A representative part number is ACDELCO A37.

This table covers the Differential covers. Read more

6 Differential Cover parts are listed for the 2012 Nissan Titan, from DANA, SKP, DORMAN and 1 other brand. DANA 2016953 carries the "Popular" badge.

Listed part numbers: DANA 2016953, SKP SK697817 and DANA 2016952, plus the other parts above.

This table covers the Differential Cover bolts. Read more

This group shows a single part: DANA 34279.

This table covers the gaskets that seal the Differential Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 711961500.

This table covers the Differential Cover plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2012 Nissan Titan — DANA 43180.

This table covers the Differential Cross pins. Read more

3 Differential Cross Pin parts are listed for the 2012 Nissan Titan, from USA STANDARD GEAR and RICHMOND.

Listed part numbers: RICHMOND CSPD44, USA STANDARD GEAR SLXPNTITAN and USA STANDARD GEAR USA33537.

This table covers the Differential Crush sleeves. Read more

5 Differential Crush Sleeve parts are listed for the 2012 Nissan Titan, from USA STANDARD GEAR, DANA, MOTIVE GEAR and 1 other brand. DANA 46925 carries the "Popular" badge.

Part numbers include DANA 46925, MOTIVE GEAR 1234726 and SKF KRS149, among others listed above.

This table covers the Differential Fill drain plugs. Read more

This group shows a single part: DANA 2001762.

This table covers the Differential Lock springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: USA STANDARD GEAR SLSPRINGSM.

This table covers the slingers that keep gear oil off the pinion seal. Read more

This group shows a single part: DANA 2002305.

This table covers the bearings and races on the differential pinion. Read more

33 Differential Pinion Bearing / Race parts are listed for the 2012 Nissan Titan, from WJB / INMOTION PARTS, BCA, SKF and 6 other brands. WJB / INMOTION PARTS WTM88048 carries the "Popular" badge. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 22 parts from BCA, SKF, SCHAEFFLER and 3 other brands.

This table covers the flanges that connect the driveshaft to the differential pinion. Read more

4 Differential Pinion Flange parts for the 2012 Nissan Titan come from 2 brands — DANA and USA STANDARD GEAR.

Part numbers include DANA 2006269, DANA 2006103 and USA STANDARD GEAR USA41187, among others listed above.

This table covers the Differential Pinion nuts. Read more

2 Differential Pinion Nut parts for the 2012 Nissan Titan come from DANA.

This group includes DANA 30271 and DANA 50366.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

4 Differential Pinion Repair Sleeve parts for the 2012 Nissan Titan come from 3 brands — WJB / INMOTION PARTS, BCA and NATIONAL.

Listed part numbers: BCA NS99189, NATIONAL 99177 and WJB / INMOTION PARTS WS99189, plus the other parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Differential Pinion Seal parts for the 2012 Nissan Titan come from 7 brands — WJB / INMOTION PARTS, NATIONAL, SKF and 4 other brands. The "Popular" part is NATIONAL 710920.

This table covers the Differential Pinion shims. Read more

2 Differential Pinion Shim parts for the 2012 Nissan Titan come from 2 brands — MOTIVE GEAR and RICHMOND.

Listed part numbers: MOTIVE GEAR 1100 and RICHMOND 1600901.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

16 Differential Rebuild Kit parts are listed for the 2012 Nissan Titan, from MOTIVE GEAR, USA STANDARD GEAR, SKF and 1 other brand. MOTIVE GEAR RA28RHDMKT carries the "Popular" badge.

In the Master Kit grade, MOTIVE GEAR, USA STANDARD GEAR, SKF and 1 other brand supply 9 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR RA28RHDMKT.

The Standard Kit section lists 7 options from MOTIVE GEAR, SKF, BCA and 1 other brand — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. MOTIVE GEAR RA28RHD is listed in this group.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

9 Differential Ring and Pinion parts for the 2012 Nissan Titan come from 3 brands — DANA, MOTIVE GEAR and USA STANDARD GEAR.

Part numbers include DANA 20025515, DANA 20025565 and DANA 20025615, among others listed above.

This table covers the Differential Ring Gear bolts. Read more

3 Differential Ring Gear Bolt parts for the 2012 Nissan Titan come from 3 brands — DANA, MOTIVE GEAR and USA STANDARD GEAR.

Part numbers include DANA 2003431, MOTIVE GEAR E5TZ4216A and USA STANDARD GEAR USA33073.

This table covers the spools that lock the differential side gears together. Read more

One part is listed for the 2012 Nissan Titan — USA STANDARD GEAR SLNTITAN32.

This table covers the Differential washers. Read more

2 Differential Washer parts for the 2012 Nissan Titan come from 2 brands — DANA and USA STANDARD GEAR.

Part numbers include DANA 49692 and USA STANDARD GEAR USA33531.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

10 Drive Shaft parts are listed for the 2012 Nissan Titan, from DORMAN, CARDONE, SKP and 2 other brands. SKP SK938209 carries the "Popular" badge.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

15 Drive Shaft Center Support Bearing parts are listed for the 2012 Nissan Titan, from DANA, WJB / INMOTION PARTS, SKP and 8 other brands. WJB / INMOTION PARTS WCHB108D carries the "Popular" badge.

Economy: 6 parts, from WJB / INMOTION PARTS, SKP, DEA / MARMON RIDE CONTROL and 1 other brand. A representative part number is WJB / INMOTION PARTS WCHB108D.

The Standard Replacement section: 9 options from DANA, ANCHOR, NATIONAL and 4 other brands. ANCHOR 6071 is listed in this group.