2013 Nissan Xterra Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Connecting Rod Bearing parts are listed for the 2013 Nissan Xterra, from ENGINETECH, MAHLE / CLEVITE, ITM ENGINE COMPONENTS and 3 other brands. ENGINETECH BB1219 carries the "Popular" badge.

This group includes ENGINETECH BB1219, MAHLE / CLEVITE CB1915P6 and ITM ENGINE COMPONENTS 6B1915 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 2013 Nissan Xterra, from ENGINETECH, FEL-PRO, AJUSA and 4 other brands. ENGINETECH NI40CSA carries the "Popular" badge.

Part numbers include ENGINETECH NI40CSA, FEL-PRO CS26370 and AJUSA 54247900, among others listed above.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2013 Nissan Xterra — ENGINETECH 838500.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Crankshaft Main Bearing parts for the 2013 Nissan Xterra come from 6 brands — TOPLINE, ENGINETECH, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ENGINETECH BC1212.

Listed part numbers: ENGINETECH BC1212, MAHLE / CLEVITE MS2343P and ITM ENGINE COMPONENTS 6M2343, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2013 Nissan Xterra come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99189, NATIONAL 99189 and SCHAEFFLER SR3507, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts for the 2013 Nissan Xterra come from 12 brands — SCHAEFFLER, NATIONAL, WJB / INMOTION PARTS and 9 other brands. The "Popular" part is FEL-PRO BS40694.

This table covers the bolts that clamp the cylinder head to the block. Read more

9 Cylinder Head Bolt parts are listed for the 2013 Nissan Xterra, from AJUSA, ENGINETECH, APEX and 6 other brands. AJUSA 81047800 carries the "Popular" badge.

This group includes AJUSA 81047800, ENGINETECH HB182 and APEX AHB534 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

18 Cylinder Head Gasket parts are listed for the 2013 Nissan Xterra, from AJUSA, APEX, FEL-PRO and 6 other brands. APEX AHG555L carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2013 Nissan Xterra, from ENGINETECH, FEL-PRO, AJUSA and 4 other brands. ENGINETECH NI40HSA carries the "Popular" badge.

Listed part numbers: ENGINETECH NI40HSA, FEL-PRO HS26370PT and AJUSA 52479700, plus the other parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2013 Nissan Xterra come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11412 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2013 Nissan Xterra — TECHPRO NI1228172.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Engine Kit Gasket Set parts are listed for the 2013 Nissan Xterra, from ENGINETECH, AJUSA, FEL-PRO and 2 other brands. ENGINETECH NI40K1 carries the "Popular" badge.

Listed part numbers: ENGINETECH NI40K1, AJUSA 50433500 and FEL-PRO 2603179, plus the other parts above.

This table covers the Engine rebuild kits. Read more

One part is listed for the 2013 Nissan Xterra — ENGINETECH RCNI40P.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

4 Exhaust Valve parts for the 2013 Nissan Xterra come from 4 brands — ENGINETECH, ITM ENGINE COMPONENTS, QUALCAST and 1 other brand.

This group includes ENGINETECH EM1013, ITM ENGINE COMPONENTS RX9613 and QUALCAST 1003030 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2013 Nissan Xterra, from ATP, DAYCO and DORMAN.

Listed part numbers: ATP 102414, DAYCO PB1664N and DORMAN 594432.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2013 Nissan Xterra, from VICTOR REINZ, FEL-PRO, ULTRA-POWER and 4 other brands. FEL-PRO MS964542 carries the "Popular" badge.

Part numbers include FEL-PRO MS964542 and AJUSA 13196000, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts are listed for the 2013 Nissan Xterra, from DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Part numbers include DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Plenum Gasket parts for the 2013 Nissan Xterra come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO MS96943.

Listed part numbers: FEL-PRO MS96943, AJUSA 01149900 and APEX AMS5551, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2013 Nissan Xterra come from 5 brands — SBI, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is SBI 13237.

Part numbers include SBI 13237, ENGINETECH IM1012 and ITM ENGINE COMPONENTS RV9963, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts for the 2013 Nissan Xterra come from 6 brands — SKP, DEA / MARMON RIDE CONTROL, ANCHOR and 3 other brands. The "Popular" part is SKP SKM9506.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM9506 is listed in this group.

In the Standard Replacement grade, DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is DEA / MARMON RIDE CONTROL A4344.

Listed part numbers: SKP SKM9506, DEA / MARMON RIDE CONTROL A4344 and ANCHOR 9506, plus the other parts above.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2013 Nissan Xterra come from ANCHOR.

Listed part numbers: ANCHOR 300140 and ANCHOR 300139.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

52 Oil parts for the 2013 Nissan Xterra come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 39 parts from LIQUI MOLY, VALVOLINE, IDEMITSU and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: DORMAN 918464.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2013 Nissan Xterra.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Oil Cooler Seal parts are listed for the 2013 Nissan Xterra, from BECK/ARNLEY, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

This group includes BECK/ARNLEY 0396616, FEL-PRO 73233 and MAHLE / CLEVITE B32573 and the remaining parts above.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2013 Nissan Xterra come from 5 brands — DORMAN, AGS, BECK/ARNLEY and 2 other brands. The "Popular" part is DORMAN 090038.

This group includes DORMAN 090038, DORMAN 090049 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2013 Nissan Xterra, from DORMAN, AJUSA, APEX and 1 other brand. DORMAN 097134 carries the "Popular" badge.

Listed part numbers: DORMAN 097134, AJUSA 01140600 and APEX ADP1904, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2013 Nissan Xterra come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107.

This group includes MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

21 Oil Filter parts for the 2013 Nissan Xterra come from 14 brands — VAICO, VARIOUS MFR, BOSCH and 11 other brands. The "Popular" part is MOBIL M1110A.

The Economy section: 8 options from VAICO, VARIOUS MFR, BOSCH and 2 other brands. BOSCH 72226WS is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1110A is listed in this group.

Standard Replacement: 11 parts, from HENGST, BOSCH, DENSO and 7 other brands. A representative part number is BOSCH 3323.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts are listed for the 2013 Nissan Xterra, from SKP, ACKOJA, AUTOTECNICA and 4 other brands. SKP SK264529 carries the "Popular" badge.

Listed part numbers: SKP SK264529, ACKOJA A380382 and AUTOTECNICA NI1415223, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 2013 Nissan Xterra come from 4 brands — VICTOR REINZ, APEX, FEL-PRO and 1 other brand. The "Popular" part is VICTOR REINZ 703141410.

Listed part numbers: VICTOR REINZ 703141410, APEX AOP555 and FEL-PRO OS30787, plus the other parts above.