2018 Nissan Altima Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — FOUR SEASONS 70065.

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Connector parts are listed for the 2018 Nissan Altima, from GPD and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: GPD 1712339 and STANDARD MOTOR PRODUCTS S2930.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 A/C Refrigerant Pressure Switch Connector parts for the 2018 Nissan Altima come from 3 brands — FOUR SEASONS, STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 2.5L L4 and the 3.5L V6.

Part numbers include FOUR SEASONS 37276, STANDARD MOTOR PRODUCTS S2458 and UNITED MOTOR PRODUCTS CON205.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2018 Nissan Altima. All of them fit every engine offered in the 2018 Altima.

Part numbers include STANDARD MOTOR PRODUCTS S2930 and STANDARD MOTOR PRODUCTS S2967.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2822.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Alternator / Generator Connector parts are listed for the 2018 Nissan Altima, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2018 Altima.

Part numbers include STANDARD MOTOR PRODUCTS S2533 and WELLS 1P4274.

This table covers the harness connectors at the Blind Spot Detection Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2507.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S3211.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Brake Light Switch Connector parts for the 2018 Nissan Altima come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 2.5L L4 and the 3.5L V6.

This group includes STANDARD MOTOR PRODUCTS HP4145, STANDARD MOTOR PRODUCTS S1519 and WELLS 1P1789.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts are listed for the 2018 Nissan Altima, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2018 Altima.

Part numbers include STANDARD MOTOR PRODUCTS S2844 and UNITED MOTOR PRODUCTS CON211.

This table covers the harness connectors at the Cruise Control Distance Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2863.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — WELLS 1P1032.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Fuel Injector Connector parts are listed for the 2018 Nissan Altima, from GB REMANUFACTURING, STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2018 Altima.

Listed part numbers: GB REMANUFACTURING 5187, STANDARD MOTOR PRODUCTS S2330 and WELLS 1P4050.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2994.

This table covers the harness connectors at the Fuel Tank Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2327.

This table covers the harness connectors at the Grille Air Intake / Shutter Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2824.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts are listed for the 2018 Nissan Altima, from DORMAN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand. All of them fit every engine offered in the 2018 Altima.

Part numbers include DORMAN 645787, STANDARD MOTOR PRODUCTS S2327 and WALKER PRODUCTS 2701085, among others listed above.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2018 Nissan Altima, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2844, STANDARD MOTOR PRODUCTS S2327 and UNITED MOTOR PRODUCTS CON211.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2824.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts are listed for the 2018 Nissan Altima, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2018 Altima.

This group includes STANDARD MOTOR PRODUCTS S2844 and UNITED MOTOR PRODUCTS CON211.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S3220.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Radio Connector parts for the 2018 Nissan Altima come from METRA. The "Popular" part is METRA AXBUCSNI326V. Every part fits both the 2.5L L4 and the 3.5L V6.

Part numbers include METRA AXBUCSNI326V, METRA AXBUCHNS and METRA AXBUCSNI246V, among others listed above.

This table covers the Repair harnesses. Read more

One part is listed for the 2018 Nissan Altima — ROSTRA 3500171.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts for the 2018 Nissan Altima come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. Every part fits both the 2.5L L4 and the 3.5L V6.

This group includes STANDARD MOTOR PRODUCTS S2458, UNITED MOTOR PRODUCTS CON205 and WELLS 1P4271.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts are listed for the 2018 Nissan Altima, from ULTRA-POWER and WALKER PRODUCTS. All of them fit every engine offered in the 2018 Altima.

Listed part numbers: ULTRA-POWER 2701096, plus the other parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2817.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Connector parts for the 2018 Nissan Altima come from 2 brands — TEKONSHA and CURT. Every part fits both the 2.5L L4 and the 3.5L V6.

Listed part numbers: CURT 56339, TEKONSHA 118470 and TEKONSHA 118731.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2888.

This table covers the harness connectors at the Vapor Canister Vent Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2888.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Nissan Altima — STANDARD MOTOR PRODUCTS S2898.

This table covers the harness connectors at the Voltage Regulator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2533.