2018 Nissan Micra Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Nissan Micra — ELRING 073890.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR4632SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts for the 2018 Nissan Micra come from 3 brands — ELRING, AJUSA and FEL-PRO.

Listed part numbers: AJUSA 54247800, ELRING 522360 and ELRING 584850, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Nissan Micra — KING ENGINE BEARINGS MB5767SI.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2018 Nissan Micra, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99157, NATIONAL 99157 and WJB / INMOTION PARTS WS99157.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Crankshaft Seal parts are listed for the 2018 Nissan Micra, from ELRING, FEL-PRO, NATIONAL and 4 other brands. FEL-PRO BS40714 carries the "Popular" badge.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 504670.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 2018 Nissan Micra come from 2 brands — ELRING and FEL-PRO.

This group includes ELRING 373281, ELRING 890320 and FEL-PRO ES73028.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts for the 2018 Nissan Micra come from 2 brands — ELRING and AJUSA.

Listed part numbers: AJUSA 10214300, ELRING 302850 and ELRING 456710, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2018 Nissan Micra come from 2 brands — ELRING and AJUSA.

Part numbers include AJUSA 52515100, ELRING 794650 and ELRING 434330.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2018 Nissan Micra come from 2 brands — ELRING and AJUSA.

This group includes AJUSA 50464800, ELRING 746140 and ELRING 994560.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2018 Nissan Micra — SBI 13234.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2018 Nissan Micra come from 5 brands — FEL-PRO, AJUSA, ELRING and 2 other brands. The "Popular" part is FEL-PRO MS97359.

Part numbers include FEL-PRO MS97359, AJUSA 13284600 and ELRING 307020, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2018 Nissan Micra — SBI 13233.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts are listed for the 2018 Nissan Micra, from ANCHOR and DEA / MARMON RIDE CONTROL.

Part numbers include ANCHOR 9828 and DEA / MARMON RIDE CONTROL A7368.

This table covers the Motor Mount kits. Read more

One part is listed for the 2018 Nissan Micra — ANCHOR 300361.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

10 Oil parts are listed for the 2018 Nissan Micra, from MOBIL and PENTOSIN. MOBIL 124184 carries the "Popular" badge.

In the Full Synthetic grade, PENTOSIN and MOBIL supply 7 parts: full-synthetic oils. A representative part number is MOBIL 124184.

The High Mileage (>75,000 Miles) section lists 3 options from MOBIL — oils grouped for high-mileage engines. MOBIL 125203 is listed in this group.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FEL-PRO 72493.

This table covers the drain plugs in the oil pan. Read more

ELRING supplies the 4 Oil Drain Plug parts for the 2018 Nissan Micra.

Part numbers include ELRING 587290, ELRING 434941 and ELRING 390430, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2018 Nissan Micra come from 3 brands — DORMAN, ELRING and AJUSA. The "Popular" part is DORMAN 097134.

This group includes DORMAN 097134, AJUSA 01140600 and DORMAN 997134CD and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

2 Oil Filler Cap parts are listed for the 2018 Nissan Micra, from CALORSTAT and GATES.

Listed part numbers: CALORSTAT OC2316 and GATES 31115.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

13 Oil Filter parts are listed for the 2018 Nissan Micra, from VARIOUS MFR, WIX, FVP and 7 other brands. VARIOUS MFR PG4612 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, FVP and PRO-TEC supply 4 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4612.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section lists 7 options from MOTORCRAFT, HASTINGS / BALDWIN, HENGST and 4 other brands — built to original-equipment specification. MOTORCRAFT FL816 is listed in this group.

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Nissan Micra — ELRING 365960.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2018 Nissan Micra come from 2 brands — DORMAN and SPECTRA PREMIUM.

This group includes DORMAN 264061 and SPECTRA PREMIUM NSP37A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 2018 Nissan Micra, from ELRING, FEL-PRO and MAHLE / CLEVITE.

Part numbers include ELRING 263380, FEL-PRO OS30876 and MAHLE / CLEVITE OS32580.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2018 Nissan Micra come from HASTINGS MANUFACTURING.

Part numbers include HASTINGS MANUFACTURING 2C4439 and HASTINGS MANUFACTURING 2C4439S.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2018 Nissan Micra come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 9671 and DEA / MARMON RIDE CONTROL A7369.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: ELRING 714860.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts are listed for the 2018 Nissan Micra, from ELRING, FEL-PRO, AJUSA and 1 other brand. FEL-PRO VS50891R carries the "Popular" badge.

Listed part numbers: FEL-PRO VS50891R, AJUSA 11144500 and ELRING 307010, plus the other parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: SBI 1601603.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts are listed for the 2018 Nissan Micra, from ELRING, AJUSA, FEL-PRO and 1 other brand. ELRING 403730 carries the "Popular" badge.

Listed part numbers: ELRING 403730, FEL-PRO SS73022 and AJUSA 12028900, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

10 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2018 Nissan Micra, from ROSTRA, HOLSTEIN, WELLS and 3 other brands. ROSTRA 790051 carries the "Popular" badge.

Economy: 7 parts, from ROSTRA, HOLSTEIN, WELLS and 1 other brand. A representative part number is ROSTRA 790051.

The Standard Replacement section: 3 options from ACKOJA and ASTEMO / HITACHI. ASTEMO / HITACHI VTS0012 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

3 Variable Valve Timing (VVT) Sprocket parts are listed for the 2018 Nissan Micra, from ASTEMO / HITACHI, GATES and VAICO.

Part numbers include ASTEMO / HITACHI VTG0005, GATES VCP817 and VAICO V380549.