2018 Nissan X-Trail Engine Parts

This table covers the chains that drive the balance shafts. Read more

One part is listed for the 2018 Nissan X-Trail — CLOYES C902.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts for the 2018 Nissan X-Trail come from 2 brands — CLOYES and MELLING.

Listed part numbers: CLOYES 95606 and MELLING BT7013.

This table covers the Balance Shaft sprockets. Read more

One part is listed for the 2018 Nissan X-Trail — MELLING S945.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan X-Trail.

Listed part numbers: AJUSA 54248000 and AJUSA 54247700.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2018 Nissan X-Trail come from 2 brands — AJUSA and VICTOR REINZ. 1 part fits every engine; the other 3 are engine-specific.

Listed part numbers: AJUSA 15045100, AJUSA 15104500 and AJUSA 15060100, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 2018 Nissan X-Trail — AJUSA 81042900.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 Nissan X-Trail.

This group includes AJUSA 10227000 and AJUSA 10226900.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan X-Trail.

Part numbers include AJUSA 52480600 and AJUSA 52491100.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2018 Nissan X-Trail.

This group includes AJUSA 50434000 and AJUSA 50433300.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2018 Nissan X-Trail, from DORMAN and ATP.

This group includes ATP 102405, DORMAN 594374 and DORMAN 594301.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 Nissan X-Trail.

Part numbers include AJUSA 13277000 and AJUSA 13276800.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Motor Mount parts for the 2018 Nissan X-Trail come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is SKP SKM9903.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM9903 is listed in this group.

In the Standard Replacement grade, ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ANCHOR 9903.

This group includes SKP SKM9903, ANCHOR 9903 and DEA / MARMON RIDE CONTROL A4367 and the remaining parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

2 Oil parts for the 2018 Nissan X-Trail come from VALVOLINE.

Listed part numbers: VALVOLINE VV935 and VALVOLINE 881165.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: VEMO V38600010.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 2018 Nissan X-Trail, from DORMAN and AJUSA. All of them fit every engine offered in the 2018 X-Trail.

This group includes AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD.

This table covers the caps on the oil filler neck. Read more

This group shows a single part: MOTORAD MO107.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

5 Oil Filter parts for the 2018 Nissan X-Trail come from 3 brands — VARIOUS MFR, MOBIL and MOTORCRAFT. The "Popular" part is MOBIL M1108A. 4 parts fit every engine; the other 1 is engine-specific.

The Economy section: 2 options from VARIOUS MFR. VARIOUS MFR PG4612 is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

Standard Replacement: 2 parts, from MOTORCRAFT and VARIOUS MFR. A representative part number is MOTORCRAFT FL816.

Listed part numbers: MOBIL M1108A, VARIOUS MFR PG4612 and VARIOUS MFR PO4612NS1, plus the other parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2018 Nissan X-Trail, from DORMAN, SPECTRA PREMIUM and SKP.

Part numbers include DORMAN 264867, DORMAN 264571 and SKP SK264571, among others listed above.

This table covers the Oil Pump sprockets. Read more

One part is listed for the 2018 Nissan X-Trail — CLOYES S945.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies both parts for the 2018 Nissan X-Trail.

This group includes HASTINGS MANUFACTURING 2C4516 and HASTINGS MANUFACTURING 2C4516S.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2018 Nissan X-Trail, from CLOYES and MELLING.

This group includes CLOYES 94212 and MELLING 1051.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: INA ZC76322T.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

This group shows a single part: CLOYES 96132.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

2 Timing Crank Sprocket parts for the 2018 Nissan X-Trail come from 2 brands — CLOYES and MELLING.

Part numbers include CLOYES S907, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Torque Strut Mount parts are listed for the 2018 Nissan X-Trail, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 9858 carries the "Popular" badge.

Economy: 1 part, from SKP. A representative part number is SKP SKM9858.

The Standard Replacement section: 6 options from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. ANCHOR 9858 is listed in this group.

This group includes ANCHOR 9858, SKP SKM9858 and ANCHOR 9857 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2018 Nissan X-Trail come from AJUSA.

Listed part numbers: AJUSA 11113200 and AJUSA 11144400.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2018 Nissan X-Trail come from AJUSA.

This group includes AJUSA 57017900, AJUSA 12009100 and AJUSA 12012100 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

7 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Nissan X-Trail come from 5 brands — DORMAN, ROSTRA, WELLS and 2 other brands. The "Popular" part is DORMAN 916922.

The Economy section: 3 options from DORMAN, ROSTRA and WELLS. DORMAN 916922 is listed in this group.

Standard Replacement: 2 parts, from NTK and STANDARD MOTOR PRODUCTS. A representative part number is NTK VV0157.

2 further parts sit outside the graded sections, with the same engine-level match.

Listed part numbers: DORMAN 916922, ROSTRA 790008 and WELLS 2T1207, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

2 Variable Valve Timing (VVT) Sprocket parts for the 2018 Nissan X-Trail come from DORMAN.

This group includes DORMAN 918104 and DORMAN 918105.