2019 Nissan Maxima Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Connecting Rod Bearing parts for the 2019 Nissan Maxima come from 2 brands — KING ENGINE BEARINGS and TOPLINE.

The High Performance section lists 2 options from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6775XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS and TOPLINE supply 2 parts: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6775CP.

Part numbers include KING ENGINE BEARINGS CR6775XP, KING ENGINE BEARINGS CR6775XPX and KING ENGINE BEARINGS CR6775CP, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Conversion / Lower Gasket Set parts for the 2019 Nissan Maxima come from 5 brands — ENGINETECH, AJUSA, APEX and 2 other brands. The "Popular" part is ENGINETECH NI35CSB.

This group includes ENGINETECH NI35CSB, AJUSA 54270200 and APEX ACS5062 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2019 Nissan Maxima, from KING ENGINE BEARINGS and TOPLINE. TOPLINE TWD34 carries the "Popular" badge.

High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB4058XPX.

The Standard Replacement section: 3 options from TOPLINE and KING ENGINE BEARINGS. TOPLINE TWD34 is listed in this group.

Part numbers include TOPLINE TWD34, KING ENGINE BEARINGS MB4058XPX and KING ENGINE BEARINGS MB4058XP, among others listed above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2019 Nissan Maxima, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99189, NATIONAL 99189 and WJB / INMOTION PARTS WS99189.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

12 Crankshaft Seal parts are listed for the 2019 Nissan Maxima, from WJB / INMOTION PARTS, NATIONAL, BCA and 7 other brands. BCA NS710356 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts for the 2019 Nissan Maxima come from 7 brands — AJUSA, ENGINETECH, APEX and 4 other brands. The "Popular" part is AJUSA 81047800.

Part numbers include AJUSA 81047800, ENGINETECH HB182 and APEX AHB534, among others listed above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

13 Cylinder Head Gasket parts for the 2019 Nissan Maxima come from 7 brands — APEX, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is APEX AHG562L.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 2019 Nissan Maxima come from 4 brands — FEL-PRO, ENGINETECH, APEX and 1 other brand. The "Popular" part is ENGINETECH NI35HSD.

This group includes ENGINETECH NI35HSD, APEX AHS5062 and FEL-PRO HS26511PT and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2019 Nissan Maxima.

This group includes KAT'S HEATERS 16600 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

5 Engine Cover parts for the 2019 Nissan Maxima come from 2 brands — TECHPRO and VARIOUS MFR. The "Popular" part is TECHPRO NI1228159.

Listed part numbers: TECHPRO NI1228159, TECHPRO NI1228160 and TECHPRO NI1228164, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2019 Nissan Maxima come from 3 brands — AJUSA, ENGINETECH and TOPLINE.

This group includes AJUSA 50590200, ENGINETECH NI35K4 and TOPLINE CGSD41A.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2019 Nissan Maxima, from SBI and TOPLINE.

Listed part numbers: SBI 13221 and TOPLINE EVD41HRL.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 2019 Nissan Maxima come from 3 brands — ATP, DAYCO and DORMAN.

This group includes ATP 102385, DAYCO PB1682N and DORMAN 594433.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2019 Nissan Maxima come from 5 brands — MAHLE / CLEVITE, AJUSA, APEX and 2 other brands. The "Popular" part is MAHLE / CLEVITE MS19450.

Part numbers include MAHLE / CLEVITE MS19450, AJUSA 13261900 and APEX AMS5621, among others listed above.

This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

3 Intake Manifold Runner Control Valve / Solenoid parts for the 2019 Nissan Maxima come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and ULTRA-POWER.

Listed part numbers: DORMAN 911506 and STANDARD MOTOR PRODUCTS RCS103, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Plenum Gasket parts are listed for the 2019 Nissan Maxima, from AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 01291300, APEX AMS5620 and FEL-PRO MS97220, among others listed above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

One part is listed for the 2019 Nissan Maxima — TOPLINE IVD41HRL.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

14 Motor Mount parts are listed for the 2019 Nissan Maxima, from PIONEER, SKP, ANCHOR and 2 other brands. ANCHOR 9808 carries the "Popular" badge.

In the Economy grade, SKP supplies 3 parts: the catalog's value-priced group. A representative part number is SKP SKMA4365HY.

The Standard Replacement section: 11 options from PIONEER, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 9808 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2019 Nissan Maxima — ANCHOR 300313.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

36 Oil parts are listed for the 2019 Nissan Maxima, from VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Grades run from Full Synthetic through Racing; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 2 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2019 Nissan Maxima, from ACKOJA and STANDARD MOTOR PRODUCTS.

Listed part numbers: ACKOJA A38600022 and STANDARD MOTOR PRODUCTS OCK78.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Oil Cooler Seal parts for the 2019 Nissan Maxima come from 2 brands — FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO 71863 and MAHLE / CLEVITE B33344.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts are listed for the 2019 Nissan Maxima, from AUTOTECNICA and DORMAN.

Listed part numbers: AUTOTECNICA NI1421464 and DORMAN 917445.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2019 Nissan Maxima, from DORMAN, AGS, BECK/ARNLEY and 2 other brands. DORMAN 090038 carries the "Popular" badge.

Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2019 Nissan Maxima come from 4 brands — DORMAN, AJUSA, APEX and 1 other brand. The "Popular" part is DORMAN 097134.

Part numbers include DORMAN 097134, AJUSA 01140600 and APEX ADP1904, among others listed above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2019 Nissan Maxima, from MOTORAD, CALORSTAT, DORMAN and 2 other brands. MOTORAD MO107 carries the "Popular" badge.

Listed part numbers: MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

19 Oil Filter parts are listed for the 2019 Nissan Maxima, from VARIOUS MFR, BOSCH, WIX and 12 other brands. CHAMP / LUBER-FINER PH2876 carries the "Popular" badge.

Economy: 7 parts, from VARIOUS MFR, CHAMP / LUBER-FINER, BOSCH and 3 other brands. A representative part number is CHAMP / LUBER-FINER PH2876.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1108A.

The Standard Replacement section: 10 options from BOSCH, WIX, ACDELCO and 7 other brands. BOSCH 3300 is listed in this group.

This table covers the oil pans that hold the engine's oil sump. Read more

3 Oil Pan parts for the 2019 Nissan Maxima come from 3 brands — DORMAN, SKP and SPECTRA PREMIUM.

Listed part numbers: DORMAN 264534, SKP SK264534 and SPECTRA PREMIUM NSP24C.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Oil Pan Gasket parts are listed for the 2019 Nissan Maxima, from VICTOR REINZ, APEX, MAHLE / CLEVITE and 2 other brands. FEL-PRO OS30696 carries the "Popular" badge.

Listed part numbers: FEL-PRO OS30696, VICTOR REINZ 703141410 and AJUSA 59010400, plus the other parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

2 Oil Pump parts are listed for the 2019 Nissan Maxima, from ASTEMO / HITACHI and TOPLINE.

This group includes ASTEMO / HITACHI OUP0037 and TOPLINE OPD41M.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2019 Nissan Maxima, from ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH EB0156 and TOPLINE PBD34.

This table covers the Thrust washers. Read more

One part is listed for the 2019 Nissan Maxima — KING ENGINE BEARINGS TW271AM.

This table covers the timing chains that keep the cams in time with the crank. Read more

6 Timing Chain parts for the 2019 Nissan Maxima come from 3 brands — MELLING, S.A. GEAR and CLOYES. The "Popular" part is MELLING 721.

This group includes MELLING 721, S.A. GEAR RC1038 and CLOYES C721F and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

5 Timing Chain & Component Kit parts are listed for the 2019 Nissan Maxima, from S.A. GEAR, CLOYES, INA and 1 other brand. CLOYES 90730SB carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76280S.

The Standard Replacement section: 3 options from CLOYES, INA and MELLING. CLOYES 90730SB is listed in this group.

This group includes CLOYES 90730SB, S.A. GEAR 76280S and S.A. GEAR 76280SW and the remaining parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts for the 2019 Nissan Maxima come from 4 brands — S.A. GEAR, CLOYES, MELLING and 1 other brand. The "Popular" part is S.A. GEAR 71009.

Listed part numbers: S.A. GEAR 71009, S.A. GEAR 91147 and CLOYES 95594, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

11 Timing Chain Tensioner parts are listed for the 2019 Nissan Maxima, from S.A. GEAR, CLOYES, MELLING and 1 other brand. S.A. GEAR 9441 carries the "Popular" badge.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Timing Cover Gasket parts are listed for the 2019 Nissan Maxima, from MAHLE / CLEVITE, APEX and ULTRA-POWER.

This group includes APEX ATC5340, MAHLE / CLEVITE B33343 and MAHLE / CLEVITE B33342 and the remaining parts above.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 2019 Nissan Maxima — SKF 99189.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2019 Nissan Maxima, from MAHLE / CLEVITE and SKF.

Part numbers include MAHLE / CLEVITE 67689 and SKF 18857.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2019 Nissan Maxima, from CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES S947 and MELLING S1221, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Torque Strut Mount parts for the 2019 Nissan Maxima come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, SKP and 1 other brand. The "Popular" part is SKP SKM9747.

The Economy section: 1 option from SKP. SKP SKM9747 is listed in this group.

Standard Replacement: 5 parts, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. A representative part number is ANCHOR 9747.

This group includes SKP SKM9747, ANCHOR 9747 and ANCHOR 9551 and the remaining parts above.

This table covers the Valve covers. Read more

7 Valve Cover parts for the 2019 Nissan Maxima come from 4 brands — APEX, DORMAN, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is APEX VCS528R.

This group includes APEX VCS528R, DORMAN 264787 and ACKOJA A380699 and the remaining parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Valve Cover Gasket parts are listed for the 2019 Nissan Maxima, from BECK/ARNLEY, APEX, AJUSA and 3 other brands. APEX AVC562 carries the "Popular" badge.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts are listed for the 2019 Nissan Maxima, from SBI, QUALCAST and TOPLINE. SBI 1408217 carries the "Popular" badge.

Listed part numbers: SBI 1408217, QUALCAST 308217 and QUALCAST 308190, plus the other parts above.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts for the 2019 Nissan Maxima come from 3 brands — MELLING, QUALCAST and SBI.

Part numbers include MELLING VL730, QUALCAST 345012 and SBI 1211064.