2020 Nissan V-Drive Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: KING ENGINE BEARINGS CR4632SM.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54206600.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2020 Nissan V-Drive — KING ENGINE BEARINGS MB5767SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2020 Nissan V-Drive.

Listed part numbers: AJUSA 15016800 and AJUSA 15104500.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 10214300.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52479600.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50572700.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: ATP 102494.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13259000.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Motor Mount parts are listed for the 2020 Nissan V-Drive, from ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 9828 and DEA / MARMON RIDE CONTROL A7368.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

VALVOLINE supplies both parts for the 2020 Nissan V-Drive.

This group includes VALVOLINE VV935 and VALVOLINE 881165.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2020 Nissan V-Drive come from 2 brands — DORMAN and AJUSA.

Listed part numbers: AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

VARIOUS MFR supplies the 3 Oil Filter parts for the 2020 Nissan V-Drive.

In the Economy grade, VARIOUS MFR supplies 2 parts: the catalog's value-priced group. A representative part number is VARIOUS MFR PG4612.

The Standard Replacement section lists 1 option from VARIOUS MFR — built to original-equipment specification. VARIOUS MFR PG4612EX is listed in this group.

Part numbers include VARIOUS MFR PG4612, VARIOUS MFR PO4612NS1 and VARIOUS MFR PG4612EX.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: CLOYES C735F.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 Nissan V-Drive — CLOYES 95681.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: CLOYES S991.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 2020 Nissan V-Drive — CLOYES S984T.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES C734F.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 2020 Nissan V-Drive come from CLOYES.

Part numbers include CLOYES 95682 and CLOYES 95683.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2020 Nissan V-Drive — CLOYES 95680.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

One part is listed for the 2020 Nissan V-Drive — CLOYES S989.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2020 Nissan V-Drive come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 9671 and DEA / MARMON RIDE CONTROL A7369.

This table covers the Valve covers. Read more

This group shows a single part: DORMAN 263271.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Nissan V-Drive — AJUSA 11144500.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2020 Nissan V-Drive.

Listed part numbers: AJUSA 12028900 and AJUSA 57052600.