2022 Nissan Altima Engine Parts

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: TOPLINE ISBD42.

This table covers the chains that drive the balance shafts. Read more

2 Balance Shaft Chain parts are listed for the 2022 Nissan Altima, from CLOYES and S.A. GEAR.

This group includes CLOYES C589 and S.A. GEAR C1280.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts for the 2022 Nissan Altima come from 2 brands — CLOYES and S.A. GEAR.

This group includes CLOYES 96343 and S.A. GEAR 91495.

This table covers the Balance Shaft sprockets. Read more

2 Balance Shaft Sprocket parts are listed for the 2022 Nissan Altima, from CLOYES and S.A. GEAR.

Listed part numbers: CLOYES S1234 and S.A. GEAR S1590.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 15121300.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2022 Nissan Altima — TOPLINE RBD42.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2022 Nissan Altima.

Part numbers include AJUSA 54322400 and AJUSA 54341100.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2022 Nissan Altima come from TOPLINE.

Part numbers include TOPLINE TWD42 and TOPLINE MBD42L.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 2022 Nissan Altima come from 5 brands — AJUSA, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is AJUSA 15045100. 1 part fits every engine; the other 8 are engine-specific.

Listed part numbers: AJUSA 15045100, FEL-PRO BS40714 and AJUSA 15093000, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2022 Nissan Altima, from MAHLE / CLEVITE, AJUSA, BECK/ARNLEY and 2 other brands. MAHLE / CLEVITE GS33509 carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE GS33509, AJUSA 81043000 and BECK/ARNLEY 0161073, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2022 Nissan Altima.

Listed part numbers: AJUSA 10263600 and AJUSA 10270200.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2022 Nissan Altima.

Listed part numbers: AJUSA 52611300 and AJUSA 52661100.

This table covers the Engine covers. Read more

5 Engine Cover parts are listed for the 2022 Nissan Altima, from TECHPRO and VARIOUS MFR. TECHPRO NI1228169 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

This group includes TECHPRO NI1228169, TECHPRO NI1228171 and TECHPRO NI1228170 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2022 Nissan Altima.

Listed part numbers: AJUSA 50551200 and AJUSA 50588400.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2022 Nissan Altima, from ATP and PIONEER.

This group includes ATP 102522 and PIONEER DA2522.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies the 3 Intake Manifold Gasket parts for the 2022 Nissan Altima.

Listed part numbers: AJUSA 13331900, AJUSA 13339500 and AJUSA 13339700.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MELLING V5835.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

11 Motor Mount parts for the 2022 Nissan Altima come from 4 brands — ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. The "Popular" part is ANCHOR 10185. 1 part fits every engine; the other 10 are engine-specific.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL A4392.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300850.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

86 Oil parts for the 2022 Nissan Altima come from 7 brands — LIQUI MOLY, VALVOLINE, MOBIL and 4 other brands. The "Popular" part is LIQUI MOLY 20228. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS OCK69.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts for the 2022 Nissan Altima come from 3 brands — DORMAN, BECK/ARNLEY and REIN. Every part fits both the 2.0L L4 Turbocharged and the 2.5L L4.

This group includes BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2022 Nissan Altima, from DORMAN, AJUSA and FEL-PRO. All of them fit every engine offered in the 2022 Altima.

Listed part numbers: AJUSA 01140600, DORMAN 097134 and DORMAN 997134CD, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts for the 2022 Nissan Altima come from 5 brands — MOTORAD, CALORSTAT, DORMAN and 2 other brands. The "Popular" part is MOTORAD MO107. Every part fits both the 2.0L L4 Turbocharged and the 2.5L L4.

Listed part numbers: MOTORAD MO107, CALORSTAT OC2316 and DORMAN 90200, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts for the 2022 Nissan Altima come from 15 brands — BOSCH, VARIOUS MFR, WIX and 12 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2876. 17 parts fit every engine; the other 1 is engine-specific.

The Economy section lists 6 options from CHAMP / LUBER-FINER, BOSCH, FRAM and 3 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH2876 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1108A is listed in this group.

In the Standard Replacement grade, BOSCH, WIX, ACDELCO and 7 other brands supply 10 parts: built to original-equipment specification. A representative part number is BOSCH 3300.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts are listed for the 2022 Nissan Altima, from DORMAN and SKP.

Part numbers include DORMAN 266001 and SKP SK5NA0B.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: VICTOR REINZ 703141410.

This table covers the chains that drive the oil pump. Read more

3 Oil Pump Chain parts are listed for the 2022 Nissan Altima, from S.A. GEAR and INA.

In the Kit grade, S.A. GEAR supplies 1 part: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is S.A. GEAR 76418P.

The Standard Replacement section: 1 option from S.A. GEAR. S.A. GEAR C1189 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes S.A. GEAR 76418P, S.A. GEAR C1189 and INA ZC0121100.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts for the 2022 Nissan Altima come from 2 brands — INA and S.A. GEAR.

Listed part numbers: INA ZT0690 and S.A. GEAR 91365.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts are listed for the 2022 Nissan Altima, from INA and S.A. GEAR.

This group includes INA ZS1088 and S.A. GEAR S1481.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: TOPLINE PBD42.

This table covers the timing chains that keep the cams in time with the crank. Read more

3 Timing Chain parts are listed for the 2022 Nissan Altima, from S.A. GEAR and CLOYES.

Part numbers include CLOYES C588, S.A. GEAR C1188 and S.A. GEAR C1279.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

8 Timing Chain & Component Kit parts for the 2022 Nissan Altima come from 4 brands — S.A. GEAR, CLOYES, INA and 1 other brand.

The Economy section: 3 options from S.A. GEAR. S.A. GEAR 76418T is listed in this group.

Standard Replacement: 4 parts, from CLOYES and INA. A representative part number is CLOYES 90588S.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include S.A. GEAR 76418T, S.A. GEAR 76418 and S.A. GEAR 76496, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts are listed for the 2022 Nissan Altima, from S.A. GEAR, CLOYES and INA. S.A. GEAR 71356 carries the "Popular" badge.

Part numbers include S.A. GEAR 71356, S.A. GEAR 91494 and CLOYES 96340, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

6 Timing Chain Tensioner parts for the 2022 Nissan Altima come from 5 brands — S.A. GEAR, CLOYES, INA and 2 other brands.

Part numbers include CLOYES 96339, INA ZT95585 and MELLING BT5585, among others listed above.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts for the 2022 Nissan Altima come from 2 brands — SKF and MAHLE / CLEVITE.

Part numbers include MAHLE / CLEVITE 67783, SKF 17897 and SKF 18132.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts for the 2022 Nissan Altima come from 2 brands — S.A. GEAR and CLOYES.

This group includes CLOYES S1233, S.A. GEAR S1480 and S.A. GEAR S1591.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Torque Strut Mount parts are listed for the 2022 Nissan Altima, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 10190 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

Part numbers include ANCHOR 10190, DEA / MARMON RIDE CONTROL A4389 and ANCHOR 10191, among others listed above.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2022 Nissan Altima — AJUSA JTC12661.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: AJUSA OP11351.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Valve Cover Gasket parts for the 2022 Nissan Altima come from 5 brands — FEL-PRO, AJUSA, BECK/ARNLEY and 2 other brands. The "Popular" part is FEL-PRO VS50746R.

This group includes FEL-PRO VS50746R, AJUSA 11113200 and AJUSA 11178700 and the remaining parts above.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2022 Nissan Altima — MELLING VS2514.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

3 Valve Spring Retainer Keeper parts are listed for the 2022 Nissan Altima, from MELLING, QUALCAST and SBI. All of them fit every engine offered in the 2022 Altima.

Part numbers include MELLING VL730, QUALCAST 345012 and SBI 1211064.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2022 Nissan Altima come from 3 brands — AJUSA, FEL-PRO and TOPLINE. 2 parts fit every engine; the other 2 are engine-specific.

Part numbers include AJUSA 57017900, AJUSA 12009100 and FEL-PRO SS72800, among others listed above.