This page lists 8 ignition parts for the 1960 Panhard PL-17, across 1 part type, covering the 850cc H2 engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 1960 Panhard PL-17, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Every listed part is a Spark Plug.
The 1960 Panhard PL-17 came with a single engine, the 850cc H2, and every part is verified against it.
5 brands supply ignition parts for the 1960 Panhard PL-17, led by CHAMPION (3 parts), AUTOLITE (2 parts) and ACDELCO (1 part), plus 2 more brands. Quality grades include Copper / Nickel, Iridium and Double Platinum.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1960 Panhard PL-17. 2 parts have it, including ACDELCO R43XLS (Spark Plug) and AUTOLITE XP64 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.030" and 0.044". Replacement brands in this table include CHAMPION, AUTOLITE and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular | R43XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION | 104 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 803 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION | 803C | 🇺🇸 US | Copper Plus | View on Amazon |
| MOTORCRAFT | SP436AX | 🇺🇸 US | Copper | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE | APP64 | 🇺🇸 US | Double PlatinumHex Size: 13/16 In | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOLITE Popular | XP64 | 🇺🇸 US | Display PackQTY2 | View on Amazon |
| SKP | SP1042 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
8 Spark Plug parts are listed for the 1960 Panhard PL-17, from CHAMPION, AUTOLITE, ACDELCO and 2 other brands. ACDELCO R43XLS carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION, ACDELCO and MOTORCRAFT supply 5 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO R43XLS.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, AUTOLITE supplies 1 part: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is AUTOLITE APP64.
The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 2 options from AUTOLITE and SKP — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. AUTOLITE XP64 is listed in this group.
This group includes ACDELCO R43XLS, CHAMPION 104 and CHAMPION 803 and the remaining parts above.
Buying Ignition Parts for a 1960 Panhard PL-17
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 850cc H2 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug .
Frequently Asked Questions
How many ignition parts fit the 1960 Panhard PL-17?
Our catalog currently lists 8 ignition parts for the 1960 Panhard PL-17 across 1 subcategory and 5 brands, covering the 850cc H2 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1960 Panhard PL-17?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1960 Panhard PL-17?
Notes on this page include pre-set gaps of 0.025", 0.030" and 0.044". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1960 Panhard PL-17 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1960 Panhard PL-17?
Every part on this page is matched to the 850cc H2 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1960 Panhard PL-17
Ignition Parts for Other Panhard PL-17 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.