The 1963 Peugeot 404 has 9 engine parts with verified fitment on this page — 2 part types and 5 brands, covering the 1.6L L4 engine. Each part includes a manufacturer part number and application notes.
The engine on the 1963 Peugeot 404 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. All 9 listed parts are Crankshaft Seal (5 parts) and Crankshaft Repair Sleeve (4 parts).
The 1963 Peugeot 404 came with a single engine, the 1.6L L4, and every part is verified against it.
5 brands supply engine parts for the 1963 Peugeot 404, led by BCA (2 parts), NATIONAL (2 parts) and SCHAEFFLER (2 parts), plus 2 more brands.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1963 Peugeot 404. 1 part has it: WJB / INMOTION PARTS WS1953 (Crankshaft Seal). Each part number opens a page with every vehicle that part fits.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS99166 | 🇺🇸 US | Front | View on Amazon |
| NATIONAL | 99166 | 🇺🇸 US | Front | View on Amazon |
| SCHAEFFLER | SS3489 | 🇺🇸 US | Front | View on Amazon |
| WJB / INMOTION PARTS | WS99166 | 🇺🇸 US | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
4 Crankshaft Repair Sleeve parts for the 1963 Peugeot 404 come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.
Listed part numbers: BCA NS99166, NATIONAL 99166 and SCHAEFFLER SS3489, plus the other parts above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular | WS1953 | 🇺🇸 US | Front | View on Amazon |
| BCA | NS1953 | 🇺🇸 US | Front | View on Amazon |
| FAMOUS BRAND | 207649551 | 🇺🇸 US 🇨🇦 CA | Front60MM X 7MM | View on Amazon |
| NATIONAL | 1953 | 🇺🇸 US | Front | View on Amazon |
| SCHAEFFLER | SS2715 | 🇺🇸 US | Front6.86 mm Width | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Crankshaft Seal parts for the 1963 Peugeot 404 come from 5 brands — WJB / INMOTION PARTS, BCA, FAMOUS BRAND and 2 other brands. The "Popular" part is WJB / INMOTION PARTS WS1953.
This group includes WJB / INMOTION PARTS WS1953, BCA NS1953 and FAMOUS BRAND 207649551 and the remaining parts above.
Buying Engine Parts for a 1963 Peugeot 404
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Crankshaft Repair Sleeve .
Frequently Asked Questions
How many engine parts fit the 1963 Peugeot 404?
Our catalog currently lists 9 engine parts for the 1963 Peugeot 404 across 2 subcategories and 5 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 1963 Peugeot 404?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1963 Peugeot 404 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1963 Peugeot 404?
Every part on this page is matched to the 1.6L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1963 Peugeot 404
Engine Parts for Other Peugeot 404 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.