1970 Peugeot 504 Engine Parts

Engine:
1.8L L4

The 1970 Peugeot 504 has 28 engine parts with verified fitment on this page — 10 part types and 11 brands, covering the 1.8L L4 engine. Each part includes a manufacturer part number and application notes.

On the 1970 Peugeot 504, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 20 parts of the 28 listed are Crankshaft Seal (9 parts), Crankshaft Repair Sleeve (7 parts) and Piston Ring (4 parts). The other 7 part types cover the remaining 8 parts.

Camshaft Bearing

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE SH1066S
🇺🇸 US
Full Set
View on
Amazon

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
BCA Popular NS99315
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
WJB / INMOTION PARTS Popular WS99166
🇺🇸 US
Shaft Diameter Minimum (In): 1.647 In
Fitment notes — WJB / INMOTION PARTS WS99166
Shaft Diameter Minimum (In): 1.647 In
Front
View on
Amazon
BCA NS99166
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
NATIONAL 99166
🇺🇸 US
Front
View on
Amazon
NATIONAL 99315
🇺🇸 US 🇨🇦 CA
Rear0.827 IN Width
Fitment notes — NATIONAL 99315
Rear0.827 IN Width3.543 IN Outside Diameter
View on
Amazon
SCHAEFFLER SR3549
🇺🇸 US
Rear24 MM Width
Fitment notes — SCHAEFFLER SR3549
Rear24 MM Width89.99 mm Outside Diameter80.01 mm Inside Diameter
View on
Amazon
WJB / INMOTION PARTS WS99315
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
NATIONAL Popular 228010
🇺🇸 US 🇨🇦 CA
Rear0.512 IN Width
Fitment notes — NATIONAL 228010
Rear0.512 IN Width3.951 IN Outside Diameter
View on
Amazon
WJB / INMOTION PARTS Popular WS228010
🇺🇸 US 🇨🇦 CA
Housing Bore: 3.9369999999999998 InMaterial: Polyacrylate
Fitment notes — WJB / INMOTION PARTS WS228010
Housing Bore: 3.9369999999999998 InMaterial: PolyacrylateRear
View on
Amazon
BCA NS1953
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
ELRING 508233
🇺🇸 US
Inner Diameter [mm]: 42Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
Fitment notes — ELRING 508233
Inner Diameter [mm]: 42Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)Swirl Type: Right-hand TwistFront
View on
Amazon
FAMOUS BRAND 207649551
🇺🇸 US 🇨🇦 CA
Front60MM X 7MM
View on
Amazon
NATIONAL 1953
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
SCHAEFFLER SS2715
🇺🇸 US 🇨🇦 CA
Front6.86 mm Width
Fitment notes — SCHAEFFLER SS2715
Front6.86 mm Width60.16 mm Outside Diameter42 mm Shaft Diameter
View on
Amazon
SCHAEFFLER SS3346
🇺🇸 US 🇨🇦 CA
Sealing Material: Viton
Fitment notes — SCHAEFFLER SS3346
Sealing Material: Viton
Rear3.94" O.D. X 0.39" Width
View on
Amazon
WJB / INMOTION PARTS WS1953
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Thrust Washer

Brand Part Number Markets Notes Buy
MAHLE / CLEVITE TW231S
🇺🇸 US
Position: 4 (Size: Standard)
View on
Amazon

This table covers the Crankshaft Thrust washers.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
VICTOR REINZ 712258310
🇺🇸 US 🇨🇦 CA
Fits KF5 Engin
Fitment notes — VICTOR REINZ 712258310
Fits:
KF5 Engin
or:
KF6 Engine
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
ELRING 813052
🇺🇸 US
Material: CopperShape: C-Shape
Fitment notes — ELRING 813052
Material: CopperShape: C-ShapeThickness [MM]: 2
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Brand Part Number Markets Notes Buy
HASTINGS / BALDWIN B195
🇺🇸 US 🇨🇦 CA
View on
Amazon
WIX 51340
🇺🇸 US 🇨🇦 CA
Media Material: Enhanced Cellulose
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING 9516
🇺🇸 US
Full SetPlain Cast Top Ring
Fitment notes — HASTINGS MANUFACTURING 9516
Full SetPlain Cast Top RingTop Groove: 1.50 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mm
Engine. Bore (in.): 3.307
View on
Amazon
HASTINGS MANUFACTURING 2C9516
🇺🇸 US
Full SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C9516
Full SetChrome Top RingTop Groove: 1.50 mm2nd Groove: 2.00 mm1ST Oil Groove: 4.00 mmTop Ring Surface Treatment: Chrome
Engine. Bore (in.): 3.307
View on
Amazon
HASTINGS MANUFACTURING 2C9516S
🇺🇸 US
Chrome Top Ring1 Cylinder Set
Fitment notes — HASTINGS MANUFACTURING 2C9516S
Chrome Top Ring1 Cylinder SetFor 2 Ring Piston
View on
Amazon
HASTINGS MANUFACTURING 9516S
🇺🇸 US
1 Cylinder SetFor 2 Ring Piston
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
ELRING 170844
🇺🇸 US
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ELRING 195952
🇺🇸 US 🇨🇦 CA
with OEM # 095605, 5469955, 7701349529, 7812103200, 7700737124, 7700733464, 12180006, 12181939, 31040777, 9150429780
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1970 Peugeot 504

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 1.8L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Crankshaft Repair Sleeve .

Frequently Asked Questions

How many engine parts fit the 1970 Peugeot 504?

Our catalog currently lists 28 engine parts for the 1970 Peugeot 504 across 10 subcategories and 11 brands, covering the 1.8L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1970 Peugeot 504?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1970 Peugeot 504 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1970 Peugeot 504?

Every part on this page is matched to the 1.8L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1970 Peugeot 504

Engine Parts for Other Peugeot 504 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.