1991 Peugeot 405 Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 15014700.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1991 Peugeot 405 — KING ENGINE BEARINGS CR4602XP.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1991 Peugeot 405 — AJUSA 54012000.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

9 Crankshaft Repair Sleeve parts for the 1991 Peugeot 405 come from 5 brands — BCA, NATIONAL, SCHAEFFLER and 2 other brands. The "Popular" part is BCA NS99353.

Listed part numbers: BCA NS99353, NATIONAL 99353 and BCA NS99146, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts for the 1991 Peugeot 405 come from 6 brands — NATIONAL, TIMKEN, BCA and 3 other brands. The "Popular" part is NATIONAL 229005.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 1991 Peugeot 405 — AJUSA 81000800.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 1991 Peugeot 405.

Part numbers include AJUSA 10005500 and AJUSA 10066800.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1991 Peugeot 405 — AJUSA 52014100.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

One part is listed for the 1991 Peugeot 405 — AJUSA 60002200.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1991 Peugeot 405 — AJUSA 50021400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 1991 Peugeot 405.

Listed part numbers: AJUSA 13050100 and AJUSA 13054400.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13049000.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

This group shows a single part: MOBIL 122492.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts for the 1991 Peugeot 405 come from 2 brands — AGS and DORMAN.

Listed part numbers: AGS ODP00012 and DORMAN 090054.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts are listed for the 1991 Peugeot 405, from DORMAN and AJUSA.

This group includes AJUSA 18001200, DORMAN 095002CD and DORMAN 095154.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 1991 Peugeot 405 come from 13 brands — CHAMPION FILTER, FAMOUS BRAND, CHAMP / LUBER-FINER and 10 other brands. The "Popular" part is CHAMP / LUBER-FINER PH2801.

The Economy section lists 11 options from CHAMPION FILTER, FAMOUS BRAND, CHAMP / LUBER-FINER and 6 other brands — the catalog's value-priced group. CHAMP / LUBER-FINER PH2801 is listed in this group.

In the Standard Replacement grade, ACDELCO, WIX, BOSCH and 1 other brand supply 4 parts: built to original-equipment specification. A representative part number is ACDELCO PF970C.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 59003700.

This table covers the rings that seal each piston to the cylinder wall. Read more

HASTINGS MANUFACTURING supplies the 8 Piston Ring parts for the 1991 Peugeot 405. HASTINGS MANUFACTURING 2M7157 carries the "Popular" badge.

The Premium section lists 1 option from HASTINGS MANUFACTURING — a step above OE specification in materials, tolerances or warranty terms. HASTINGS MANUFACTURING 2M7157 is listed in this group.

The Standard Replacement section: 7 options from HASTINGS MANUFACTURING. HASTINGS MANUFACTURING 2D7435 is listed in this group.

Listed part numbers: HASTINGS MANUFACTURING 2M7157, HASTINGS MANUFACTURING 2D7435 and HASTINGS MANUFACTURING 4865, plus the other parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

One part is listed for the 1991 Peugeot 405 — GATES T189.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: FAMOUS BRAND S223605.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 1991 Peugeot 405 come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 11000200 and ELRING 156680.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Valve Stem Seal parts for the 1991 Peugeot 405 come from AJUSA.

Listed part numbers: AJUSA 12004500 and AJUSA 57004900.