1997 Peugeot 306 Engine Parts

Engine:
1.6L L4

25 Engine parts are listed for the 1997 Peugeot 306, in 15 part types, covering the 1.6L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

The engine on the 1997 Peugeot 306 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (5 parts), Intake Manifold Gasket (3 parts) and Conversion / Lower Gasket Set (2 parts). The other 12 part types cover the remaining 15 parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15014700
🇲🇽 MX
36 X 50 X 7Clockwise
Fitment notes — AJUSA 15014700
36 X 50 X 7ClockwiseEngine TU5JP(NFZ)
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 54061900
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon
ELRING 218850
🇲🇽 MX
with Crankshaft Seal
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA 15020500
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15020500
FrontClockwiseEngine TU5JP(NFZ)
View on
Amazon
AJUSA 15037900
🇲🇽 MX
Rear85 X 105 X 12
Fitment notes — AJUSA 15037900
Rear85 X 105 X 12Counter ClockwiseEngine TU5JP(NFZ)
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA 81006700
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA 10076900
🇲🇽 MX
79 Bore DiameterEngine # TU5JP(NFZ)
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 52104900
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon
ELRING 375300
🇲🇽 MX
with cylinder head cover gasket, with camshaft seal, with valve stem seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Cylinder Repair Sleeve

Brand Part Number Markets Notes Buy
AJUSA 60002600
🇲🇽 MX
Engine TU5JP(NFZ)
View on
Amazon

This table covers the wear sleeves used to restore a Cylinder seal surface.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA 50118700
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA 13213400
🇲🇽 MX
UpperEngine TU5JP(NFZ)
View on
Amazon
AJUSA 28005800
🇲🇽 MX
LowerEngine TU5JP(NFZ)
View on
Amazon
ELRING 331810
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA 00502300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 00502300
Multi Layered Steel
Engine TU5JP(NFZ)
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
PUROLATOR L17662
🇲🇽 MX
Outer Diameter Bottom: 2.98 InStyle: Spin-On Lube Filter
View on
Amazon
VARIOUS MFR PG7662
🇲🇽 MX
Spin-On
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
WIX Popular 57046
🇲🇽 MX
View on
Amazon
MAHLE / CLEVITE OC976
🇲🇽 MX
View on
Amazon
MANN W7128
🇲🇽 MX
Bypass Relief Valve Setting: 22 PSI
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
ELRING 773740
🇲🇽 MX
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING 2C9369S
🇲🇽 MX
1 Cylinder SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C9369S
1 Cylinder SetChrome Top RingTop Groove: 1.20 mm2nd Groove: 1.50 mm1st Oil Groove: 2.50 mmFor 2 Ring Piston
Engine. Bore (in.): 3.091
View on
Amazon
HASTINGS MANUFACTURING 2C9369
🇲🇽 MX
Full SetTop Ring Surface Treatment: Chrome
Fitment notes — HASTINGS MANUFACTURING 2C9369
Full SetTop Ring Surface Treatment: ChromeTop Groove: 1.20 mm2nd Groove: 1.50 mm1ST Oil Groove: 2.50 mmfor 2 Ring Piston
Engine. Bore (in.): 3.091
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA 11023900
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA 57013400
🇲🇽 MX
Engine # TU5JP(NFZ)
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1997 Peugeot 306

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Oil Filter and Intake Manifold Gasket .

Frequently Asked Questions

How many engine parts fit the 1997 Peugeot 306?

Our catalog currently lists 25 engine parts for the 1997 Peugeot 306 across 15 subcategories and 8 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1997 Peugeot 306?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1997 Peugeot 306 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1997 Peugeot 306?

Every part on this page is matched to the 1.6L L4 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1997 Peugeot 306

Engine Parts for Other Peugeot 306 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.