5 Ignition parts are listed for the 2001 Peugeot 406, in 2 part types, covering the 2.0L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2001 Peugeot 406, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 5 listed parts are Spark Plug (3 parts) and Crankshaft Position Sensor (2 parts).
Every part on this page is matched to the 2.0L L4 — the only engine offered in the 2001 Peugeot 406.
The most listed brands for 2001 Peugeot 406 ignition parts are NGK (3 parts), STANDARD MOTOR PRODUCTS (1 part) and WALKER PRODUCTS (1 part). Quality grades include Copper / Nickel, Iridium and Platinum.
Each part number listed for the 2001 Peugeot 406 opens a page with every vehicle that part fits.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PC1010 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 2351364 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Crankshaft Position Sensor parts are listed for the 2001 Peugeot 406, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.
Listed part numbers: STANDARD MOTOR PRODUCTS PC1010 and WALKER PRODUCTS 2351364.
Spark Plug
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK | 2288 | 🇲🇽 MX | StandardPre-Set Gap: 0.036" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK | 6418 | 🇲🇽 MX | Iridium IXPre-Set Gap: 0.032" | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK | 7092 | 🇲🇽 MX | G-PowerPre-Set Gap: 0.040" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
3 Spark Plug parts for the 2001 Peugeot 406 come from NGK.
The Copper / Nickel section lists 1 option from NGK — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. NGK 2288 is listed in this group.
In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, NGK supplies 1 part: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 6418.
The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from NGK — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 7092 is listed in this group.
Buying Ignition Parts for a 2001 Peugeot 406
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 2.0L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2001 Peugeot 406?
Our catalog currently lists 5 ignition parts for the 2001 Peugeot 406 across 2 subcategories and 3 brands, covering the 2.0L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2001 Peugeot 406?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 2001 Peugeot 406?
Notes on this page include pre-set gaps of 0.032", 0.036" and 0.040". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2001 Peugeot 406 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2001 Peugeot 406?
Every part on this page is matched to the 2.0L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2001 Peugeot 406
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.