2008 Peugeot 407 Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2008 Peugeot 407 come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 15014700, AJUSA 15077700 and AJUSA 15062600 and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2008 Peugeot 407.

This group includes AJUSA 54111900 and AJUSA 54091800.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Crankshaft Seal parts for the 2008 Peugeot 407 come from 2 brands — AJUSA and ELRING. The "Popular" part is ELRING 076220. 2 parts fit every engine; the other 5 are engine-specific.

Listed part numbers: ELRING 076220, AJUSA 15044900 and AJUSA 15063900, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts are listed for the 2008 Peugeot 407, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

This group includes AJUSA 81032900, AJUSA 81049700 and ELRING 330060.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies the 7 Cylinder Head Gasket parts for the 2008 Peugeot 407.

This group includes AJUSA 10150700, AJUSA 52204800 and AJUSA 10147000 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2008 Peugeot 407, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: AJUSA 52208900, AJUSA 52204700 and ELRING 375000.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2008 Peugeot 407.

Part numbers include AJUSA 50223800 and AJUSA 50220400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2008 Peugeot 407, from AJUSA and ELRING. 1 part fits every engine; the other 3 are engine-specific.

This group includes AJUSA 13184400, AJUSA 01048500 and AJUSA 13180400 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: DEA / MARMON RIDE CONTROL AM712.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

5 Oil parts for the 2008 Peugeot 407 come from VALVOLINE.

This group includes VALVOLINE 797977, VALVOLINE 881148 and VALVOLINE VV966 and the remaining parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

10 Oil Filter parts for the 2008 Peugeot 407 come from 6 brands — VARIOUS MFR, PUROLATOR, WIX and 3 other brands. The "Popular" part is PRO-TEC PXL51381. 1 part fits every engine; the other 9 are engine-specific.

The Economy section lists 5 options from VARIOUS MFR, PUROLATOR and PRO-TEC — the catalog's value-priced group. PRO-TEC PXL51381 is listed in this group.

In the Standard Replacement grade, WIX, MANN and MAHLE / CLEVITE supply 5 parts: built to original-equipment specification. A representative part number is WIX 51381.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2008 Peugeot 407 come from AJUSA.

This group includes AJUSA 11086600 and AJUSA 11086700.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 2008 Peugeot 407 come from AJUSA.

Listed part numbers: AJUSA 85005800 and AJUSA 85014300.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2008 Peugeot 407 come from AJUSA.

Part numbers include AJUSA 12014800, AJUSA 57030900 and AJUSA 57057800.