6 Ignition parts are listed for the 2008 Peugeot Partner, in 4 part types, covering the 1.6L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2008 Peugeot Partner, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Ignition Coil (2 parts), Spark Plug / Ignition Coil Boot (2 parts) and Camshaft Position Sensor (1 part). The other 1 part type covers the remaining 1 part.
The 2008 Peugeot Partner came with a single engine, the 1.6L L4, and every part is verified against it.
3 brands supply ignition parts for the 2008 Peugeot Partner, led by WALKER PRODUCTS (3 parts), STANDARD MOTOR PRODUCTS (2 parts) and UNITED MOTOR PRODUCTS (1 part). Quality grades include Economy and Standard Replacement.
Each part number listed for the 2008 Peugeot Partner opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS | 2352239 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
This group shows a single part: WALKER PRODUCTS 2352239.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS | 2351546 | 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
This group shows a single part: WALKER PRODUCTS 2351546.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | COP601 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS | 9212116 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
2 Ignition Coil parts for the 2008 Peugeot Partner come from 2 brands — UNITED MOTOR PRODUCTS and WALKER PRODUCTS.
This group includes UNITED MOTOR PRODUCTS COP601 and WALKER PRODUCTS 9212116.
Spark Plug / Ignition Coil Boot
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 19911 | 🇲🇽 MX | Federal Wire | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | SPP201E | 🇲🇽 MX | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
2 Spark Plug / Ignition Coil Boot parts for the 2008 Peugeot Partner come from STANDARD MOTOR PRODUCTS.
The Economy section lists 1 option from STANDARD MOTOR PRODUCTS — the catalog's value-priced group. STANDARD MOTOR PRODUCTS 19911 is listed in this group.
In the Standard Replacement grade, STANDARD MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS SPP201E.
Part numbers include STANDARD MOTOR PRODUCTS 19911 and STANDARD MOTOR PRODUCTS SPP201E.
Buying Ignition Parts for a 2008 Peugeot Partner
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.6L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Spark Plug / Ignition Coil Boot .
Frequently Asked Questions
How many ignition parts fit the 2008 Peugeot Partner?
Our catalog currently lists 6 ignition parts for the 2008 Peugeot Partner across 4 subcategories and 3 brands, covering the 1.6L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2008 Peugeot Partner?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Peugeot Partner was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Peugeot Partner?
Every part on this page is matched to the 1.6L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Peugeot Partner
Ignition Parts for Other Peugeot Partner Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.