9 Ignition parts are listed for the 2012 Peugeot Partner, in 4 part types, covering all 3 engine options (1.6L L4, 1.6L L4 DIESEL Turbocharged DOHC and 1.6L L4 DIESEL Turbocharged SOHC). Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2012 Peugeot Partner, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. Most of the listed parts are Camshaft Position Sensor (3 parts), Crankshaft Position Sensor (2 parts) and Ignition Coil (2 parts). The other 1 part type covers the remaining 2 parts.
The 2012 Peugeot Partner was sold with 3 engines. 3 parts fit every engine; the other 6 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2012 Peugeot Partner ignition parts are WALKER PRODUCTS (5 parts), STANDARD MOTOR PRODUCTS (2 parts) and MARELLI (1 part), plus 1 more brand. Quality grades include Economy and Standard Replacement.
Each part number listed for the 2012 Peugeot Partner opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MARELLI Fits: all 2012 Partner engines | SAC096 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 1.6L L4 | 2352239 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WALKER PRODUCTS Fits: 1.6L L4 DIESEL Turbocharged SOHC | 2351939 | 🇲🇽 MX | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
3 Camshaft Position Sensor parts are listed for the 2012 Peugeot Partner, from WALKER PRODUCTS and MARELLI. 1 part fits every engine; the other 2 are engine-specific.
Part numbers include MARELLI SAC096, WALKER PRODUCTS 2352239 and WALKER PRODUCTS 2351939.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS Fits: 1.6L L4 | 2351546 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WALKER PRODUCTS Fits: 1.6L L4 DIESEL Turbocharged DOHC, 1.6L L4 DIESEL Turbocharged SOHC | 2352137 | 🇲🇽 MX | Length 52,6 EP 35 Connector Gold Plated | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
WALKER PRODUCTS supplies both parts for the 2012 Peugeot Partner.
Listed part numbers: WALKER PRODUCTS 2351546 and WALKER PRODUCTS 2352137.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS Fits: 1.6L L4 | COP601 | 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Fits: 1.6L L4 | 9212116 | 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
2 Ignition Coil parts are listed for the 2012 Peugeot Partner, from UNITED MOTOR PRODUCTS and WALKER PRODUCTS.
This group includes UNITED MOTOR PRODUCTS COP601 and WALKER PRODUCTS 9212116.
Spark Plug / Ignition Coil Boot
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2012 Partner engines | 19911 | 🇲🇽 MX | Federal Wire | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2012 Partner engines | SPP201E | 🇲🇽 MX | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
STANDARD MOTOR PRODUCTS supplies both parts for the 2012 Peugeot Partner. All of them fit every engine offered in the 2012 Partner.
In the Economy grade, STANDARD MOTOR PRODUCTS supplies 1 part: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS 19911.
The Standard Replacement section lists 1 option from STANDARD MOTOR PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS SPP201E is listed in this group.
Listed part numbers: STANDARD MOTOR PRODUCTS 19911 and STANDARD MOTOR PRODUCTS SPP201E.
Buying Ignition Parts for a 2012 Peugeot Partner
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2012 Peugeot Partner?
Our catalog currently lists 9 ignition parts for the 2012 Peugeot Partner across 4 subcategories and 4 brands, covering all 3 engine options (1.6L L4, 1.6L L4 DIESEL Turbocharged DOHC and 1.6L L4 DIESEL Turbocharged SOHC). Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2012 Peugeot Partner engines?
Some do. 3 parts fit every engine; the other 6 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2012 Peugeot Partner?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Peugeot Partner was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Peugeot Partner?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Peugeot Partner
Ignition Parts for Other Peugeot Partner Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.