2021 Peugeot 5008 Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

59 Engine parts are listed for the 2021 Peugeot 5008, in 26 part types, covering both the 1.6L L4 Turbocharged and the 2.0L L4 DIESEL Turbocharged. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 2021 Peugeot 5008, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 19 parts of the 59 listed are Cylinder Head Gasket (8 parts), Crankshaft Seal (6 parts) and Valve Stem Seal (5 parts). The other 23 part types cover the remaining 40 parts.

Camshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 15061800
🇲🇽 MX
27 X 47 X 7Clockwise
Fitment notes — AJUSA 15061800
27 X 47 X 7ClockwiseEngine DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 54266200
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 54237500
🇲🇽 MX
Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 376330
🇲🇽 MX
with Crankshaft Seal
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 15094500
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15094500
FrontClockwiseEngine # 5GY
View on
Amazon
AJUSA Fits: 1.6L L4 Turbocharged 15094200
🇲🇽 MX
Rear85 x 105 x 8
Fitment notes — AJUSA 15094200
Rear85 x 105 x 8Counter ClockwiseEngine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 15088500
🇲🇽 MX
FrontClockwise
Fitment notes — AJUSA 15088500
FrontClockwiseEngine DW10FD (AHR, AHS, AHV, AHX), DW10FC (AHW)
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 15088600
🇲🇽 MX
Rear90 X 110 X 7
Fitment notes — AJUSA 15088600
Rear90 X 110 X 7Counter ClockwiseEngine DW10FD (AHR, AHS, AHV, AHX), DW10FC (AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 004450
🇲🇽 MX
with Mounting Sleeve
Fitment notes — ELRING 004450
with Mounting Sleeve
Front
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 369470
🇲🇽 MX
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
Fitment notes — ELRING 369470
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
RearTransmission Side
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 81044100
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 81062600
🇲🇽 MX
Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 426830
🇲🇽 MX
SetNumber of Bolts/Screws: 13
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 10187100
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10187100
Multi Layered Steel
78 Bore DiameterEngine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 10223200
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10223200
Multi Layered Steel
86 Bore DiameterEngine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)with 1 Grooves(1.25) Thickness
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 10223210
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10223210
Multi Layered Steel
86 Bore DiameterEngine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)with 2 Grooves(1.30) Thickness
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 10223220
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10223220
Multi Layered Steel
86 Bore DiameterEngine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)with 3 Grooves(1.35) Thickness
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 10223230
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10223230
Multi Layered Steel
86 Bore DiameterEngine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)with 4 Grooves(1.40) Thickness
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 295751
🇲🇽 MX
Diameter [MM]: 78,3Gasket Design: Multilayer Steel (MLS)
Fitment notes — ELRING 295751
Diameter [MM]: 78,3Gasket Design: Multilayer Steel (MLS)Installed Thickness [MM]: 1,24
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 729040
🇲🇽 MX
Diameter [MM]: 78.3Gasket Design: Multilayer Steel (MLS)
Fitment notes — ELRING 729040
Diameter [MM]: 78.3Gasket Design: Multilayer Steel (MLS)Installed Thickness [MM]: 0.94
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 729041
🇲🇽 MX
Diameter [MM]: 78,3Gasket Design: Multilayer Steel (MLS)
Fitment notes — ELRING 729041
Diameter [MM]: 78,3Gasket Design: Multilayer Steel (MLS)Installed Thickness [MM]: 0,94
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 52509900
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 53063500
🇲🇽 MX
Does Not Include Cylinder Head Gasket
Fitment notes — AJUSA 53063500
Does Not Include Cylinder Head Gasket
Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 50460100
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 51069400
🇲🇽 MX
Does Not Include Cylinder Head Gasket
Fitment notes — AJUSA 51069400
Does Not Include Cylinder Head Gasket
Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 24036700
🇲🇽 MX
Engine # 5GY
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 893600
🇲🇽 MX
Material: Fluoroelastomer (FPM)
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Intake Plenum Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 01483200
🇲🇽 MX
View on
Amazon

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Cooler Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 77014200
🇲🇽 MX
Engine DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Drain Plug

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 Turbocharged 523450
🇲🇽 MX
without Seal RingBolt Head/Nut Design: Hexagon Socket
Fitment notes — ELRING 523450
without Seal RingBolt Head/Nut Design: Hexagon SocketThread Size: M16X1,5x16
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 523470
🇲🇽 MX
with Seal RingBolt Head/Nut Design: Hexagon Socket
Fitment notes — ELRING 523470
with Seal RingBolt Head/Nut Design: Hexagon SocketThread Size: M16X1,5x16
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 18001200
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 16021500
🇲🇽 MX
Engine DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 813052
🇲🇽 MX
Material: CopperShape: C-Shape
Fitment notes — ELRING 813052
Material: CopperShape: C-ShapeThickness [MM]: 2
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: 2.0L L4 DIESEL Turbocharged PG7662
🇲🇽 MX
Spin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Filter Housing Seal

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 Turbocharged 473830
🇲🇽 MX
View on
Amazon

This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 14103500
🇲🇽 MX
Engine DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Pump

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.6L L4 Turbocharged 707919330
🇲🇽 MX
Gear Pumpwith Electrical Oil Pressure Valve
View on
Amazon

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.

Turbocharger Boost Solenoid

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.6L L4 Turbocharged 701777190
🇲🇽 MX
Electric-PneumaticValve Type: Solenoid Valve
Fitment notes — PIERBURG 701777190
Electric-PneumaticValve Type: Solenoid Valve
For vehicles with automatic transmission
View on
Amazon

This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.

Turbocharger Diverter / Bypass Valve

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.6L L4 Turbocharged 701115080
🇲🇽 MX
ElectricValve Type: Overrun Air Valve
Fitment notes — PIERBURG 701115080
ElectricValve Type: Overrun Air Valve
Overrun Air Valve
View on
Amazon

This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.

Turbocharger Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 01207600
🇲🇽 MX
View on
Amazon
AJUSA Fits: 1.6L L4 Turbocharged JTC11858
🇲🇽 MX
Mounting Gasket Set
Fitment notes — AJUSA JTC11858
Mounting Gasket Set
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged JTC12034
🇲🇽 MX
Mounting Gasket Set
Fitment notes — AJUSA JTC12034
Mounting Gasket Set
Engine DW10FD (AHR, AHS, AHV, AHX), DW10FC (AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 737720
🇲🇽 MX
Charge Type: Exhaust Turbocharger
View on
Amazon

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Turbocharger Mounting Hardware

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 Turbocharged 376340
🇲🇽 MX
with gaskets/sealswith Mounting Manual,with Bolts/Screws
View on
Amazon

This table covers the fasteners that mount the turbocharger.

Turbocharger Oil Line

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged OP10949
🇲🇽 MX
Engine # 5GYSupply Tube
View on
Amazon
AJUSA Fits: 1.6L L4 Turbocharged OPR00016
🇲🇽 MX
Engine # 5GYReturn Line
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged OP10941
🇲🇽 MX
Engine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)Supply Tube
View on
Amazon

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.

Turbocharger Oil Line Gasket / O-Ring

Brand Part Number Markets Notes Buy
ELRING Fits: 1.6L L4 Turbocharged 788770
🇲🇽 MX
View on
Amazon

This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 56063000
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 56063500
🇲🇽 MX
Engine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 85019600
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 85017100
🇲🇽 MX
Engine # DW10FD(AHR, AHS, AHV, AHX), DW10FC(AHW)
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 1.6L L4 Turbocharged 57053200
🇲🇽 MX
Engine # 5GY
View on
Amazon
AJUSA Fits: 1.6L L4 Turbocharged 12029300
🇲🇽 MX
4.5 x 8.89 x 17.9Engine # 5GY
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 12029100
🇲🇽 MX
5.25 x 10.7 x 18.8Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon
AJUSA Fits: 2.0L L4 DIESEL Turbocharged 57053100
🇲🇽 MX
Engine # DW10FD(AHR,AHS,AHV,AHX),DW10FC(AHW)
View on
Amazon
ELRING Fits: 1.6L L4 Turbocharged 747210
🇲🇽 MX
SetMaterial: FPM (fluoride rubber)
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Brand Part Number Markets Notes Buy
PIERBURG Fits: 1.6L L4 Turbocharged 706117450
🇲🇽 MX
Electric
Fitment notes — PIERBURG 706117450
Electric
Control Valve
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2021 Peugeot 5008

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2021 Peugeot 5008?

Our catalog currently lists 59 engine parts for the 2021 Peugeot 5008 across 26 subcategories and 4 brands, covering both the 1.6L L4 Turbocharged and the 2.0L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2021 Peugeot 5008 engines?

Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2021 Peugeot 5008?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Peugeot 5008 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2021 Peugeot 5008?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2021 Peugeot 5008

Engine Parts for Other Peugeot 5008 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.