2011 Ram 4500 Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 A/C Compressor Clutch Coil Connector parts are listed for the 2011 Ram 4500, from ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: ROSTRA 610040, STANDARD MOTOR PRODUCTS S2052 and WELLS 1P1711.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 ABS Wheel Speed Sensor Connector parts are listed for the 2011 Ram 4500, from STANDARD MOTOR PRODUCTS, ACDELCO, HOLSTEIN and 2 other brands. STANDARD MOTOR PRODUCTS HP3945 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, plus the other parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts are listed for the 2011 Ram 4500, from ROSTRA, STANDARD MOTOR PRODUCTS and WELLS.

This group includes ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and WELLS 1P2224.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Back Up / Reverse Lamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P3332.

This table covers the harness connectors at the Barometric Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2883.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Blower Motor Control Module / Resistor Connector parts for the 2011 Ram 4500 come from 4 brands — WELLS, GPD, DORMAN and 1 other brand. The "Popular" part is GPD 1712769.

This group includes GPD 1712769, DORMAN 645725 and FOUR SEASONS 37258 and the remaining parts above.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts for the 2011 Ram 4500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Camshaft Position Sensor Connector parts are listed for the 2011 Ram 4500, from STANDARD MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1832 and WELLS 1P2682.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Crankshaft Position Sensor Connector parts are listed for the 2011 Ram 4500, from STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1832 and WELLS 1P2682.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S2894.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

2 Door Wiring Harness / Connector parts for the 2011 Ram 4500 come from MOPAR.

Part numbers include MOPAR 68053527AB and MOPAR 68053528AB.

This table covers the harness connectors at the EGR Pressure Feedback (DPFE) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S2937.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S3273.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — MOPAR 5148147AC.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: MOPAR 68086392AA.

This table covers the harness connectors at the Exhaust Gas Temperature (EGT) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2011 Ram 4500.

Listed part numbers: STANDARD MOTOR PRODUCTS S3159 and STANDARD MOTOR PRODUCTS S2052.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fog / Driving Lamp Connector parts are listed for the 2011 Ram 4500, from STANDARD MOTOR PRODUCTS, ACDELCO, MOPAR and 2 other brands. STANDARD MOTOR PRODUCTS HP3970 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS HP3970, STANDARD MOTOR PRODUCTS S524 and ACDELCO LS255, among others listed above.

This table covers the harness connectors at the Fuel Injection Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1458.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — SKP SKS824.

This table covers the harness connectors at the Fuel Rail. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1038.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — WELLS 1P1612.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

6 Headlamp Wiring Harness / Connector parts for the 2011 Ram 4500 come from 2 brands — STANDARD MOTOR PRODUCTS and MOPAR. The "Popular" part is STANDARD MOTOR PRODUCTS LWH104.

Part numbers include STANDARD MOTOR PRODUCTS LWH104, STANDARD MOTOR PRODUCTS LWH106 and MOPAR 68042514AE, among others listed above.

This table covers the harness connectors at the Heater Core Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at the Instrument Panel Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1612.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1028.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S949.

This table covers the harness connectors at the NOx (Nitrogen Oxide) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 NOx (Nitrogen Oxide) Sensor Connector parts for the 2011 Ram 4500 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1461, STANDARD MOTOR PRODUCTS S2891 and UNITED MOTOR PRODUCTS CON222.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1419.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S1497.

This table covers the harness connectors at the Seat Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Seat Heater Connector parts are listed for the 2011 Ram 4500, from ROSTRA and WELLS.

Listed part numbers: ROSTRA 610977 and WELLS 1P2228.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts for the 2011 Ram 4500 come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P2546.

This table covers the harness connectors at the Steering Wheel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

MOPAR supplies both parts for the 2011 Ram 4500.

This group includes MOPAR 68056180AB and MOPAR 68071828AA.

This table covers the harness connectors at the Steering Wheel Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Temperature Sender / Sensor Connector parts are listed for the 2011 Ram 4500, from STANDARD MOTOR PRODUCTS, ACDELCO and WALKER PRODUCTS.

Listed part numbers: ACDELCO PT2386, STANDARD MOTOR PRODUCTS HP3840 and STANDARD MOTOR PRODUCTS TX3A, plus the other parts above.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — CURT 57101.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

12 Trailer Connector parts for the 2011 Ram 4500 come from 3 brands — CURT, FAMOUS BRAND and WELLS. The "Popular" part is CURT 56415.

This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — CURT 56475.

This table covers the wiring-harness connectors at the Transmission-Automatic. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

7 Transmission-Automatic Wiring Harness / Connector parts for the 2011 Ram 4500 come from 2 brands — MOPAR and ROSTRA. The "Popular" part is ROSTRA 3500159.

Listed part numbers: ROSTRA 3500159, ROSTRA 3500160 and MOPAR 68020010AB, plus the other parts above.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2011 Ram 4500.

Part numbers include STANDARD MOTOR PRODUCTS HP4325 and STANDARD MOTOR PRODUCTS S1024.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S3082.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 4500 — STANDARD MOTOR PRODUCTS S2279.