2018 Ram 4000 Wheel Parts

Engine:
5.7L V8

This page lists 20 wheel parts for the 2018 Ram 4000, across 5 part types, covering the 5.7L V8 engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 2018 Ram 4000, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings. Most of the listed parts are Lug Nut (8 parts), Lug Nut Lock (5 parts) and Lug Stud (3 parts). The other 2 part types cover the remaining 4 parts.

Lug Nut

Brand Part Number Markets Notes Buy
DORMAN Popular 711606
🇲🇽 MX
Open EndSteel
Fitment notes — DORMAN 711606
Open EndSteelBulge Seat0.832 In Overall Length
View on
Amazon
DORMAN Popular 611330
🇲🇽 MX
Closed EndSteel
Fitment notes — DORMAN 611330
Closed EndSteelDometop Capped Nut1.512 In Overall Length
with Single Rear Wheel
View on
Amazon
DORMAN 713685
🇲🇽 MX
Open EndCarbon Steel
Fitment notes — DORMAN 713685
Open EndCarbon SteelBulge Seat48 MM Overall LengthDuplex AcornChrome
View on
Amazon
DORMAN 711604
🇲🇽 MX
Closed EndSteel
Fitment notes — DORMAN 711604
Closed EndSteelDuplex Acorn1.867 In Overall Length
View on
Amazon
DORMAN 7126005
🇲🇽 MX
Closed EndSteel
Fitment notes — DORMAN 7126005
Closed EndSteelAcorn48 MM Overall Length
View on
Amazon
DORMAN 7126055
🇲🇽 MX
Closed EndSteel
Fitment notes — DORMAN 7126055
Closed EndSteelAcorn51 MM Overall Length
View on
Amazon
DORMAN 611187
🇲🇽 MX
Closed EndSteel
Fitment notes — DORMAN 611187
Closed EndSteelDuplex Acorn1.87 In Overall Length
View on
Amazon
DORMAN 611936
🇲🇽 MX
Open EndSteel
Fitment notes — DORMAN 611936
Open EndSteelBlackFlange Nut28.5 MM Overall Length
with Dual Rear Wheels (DRW)
View on
Amazon

This table covers the lug nuts that hold each wheel on the hub.

Lug Nut Lock

Brand Part Number Markets Notes Buy
DORMAN Popular 711656
🇲🇽 MX
BlackCarbon Steel
Fitment notes — DORMAN 711656
BlackCarbon SteelThread Size: M14-1.50Acorn(20 Locks / 1 Key)
Overall Length: 1.46 InWidth: 0.9 In
View on
Amazon
DORMAN 712628
🇲🇽 MX
ChromeThread Size: M14-1.50
Fitment notes — DORMAN 712628
ChromeThread Size: M14-1.50Spline Drive(4 Locks / 1 Key)
Overall Length: 36 MM
View on
Amazon
DORMAN 712681
🇲🇽 MX
ChromeThread Size: M14-1.50
Fitment notes — DORMAN 712681
ChromeThread Size: M14-1.50(4 Locks / 1 Key)
Overall Length: 1.43 In
View on
Amazon
DORMAN 711621
🇲🇽 MX
ChromeThread Size: M14-1.50
Fitment notes — DORMAN 711621
ChromeThread Size: M14-1.50AcornSizeM14-1.50
Overall Length: 1.42 In
View on
Amazon
DORMAN 711624
🇲🇽 MX
ChromeThread Size: M14-1.50
Fitment notes — DORMAN 711624
ChromeThread Size: M14-1.50Duplex AcornSizeM14-1.50
Overall Length: 2.05 In
View on
Amazon

This table covers the locking lug nuts and keys.

Lug Stud

Brand Part Number Markets Notes Buy
DORMAN 610615
🇲🇽 MX
Thread Size: M14-1.50
Fitment notes — DORMAN 610615
Thread Size: M14-1.50
Fits:
FrontRWD
or:
RearRWD
View on
Amazon
DORMAN 610785
🇲🇽 MX
Thread Size: M14-1.50
Fitment notes — DORMAN 610785
Thread Size: M14-1.50
Front4WD
View on
Amazon
DORMAN 610784
🇲🇽 MX
Thread Size: M14-1.50
Fitment notes — DORMAN 610784
Thread Size: M14-1.50
Rear4WD
View on
Amazon

This table covers the Lug studs.

Tire Pressure Monitoring System (TPMS) Sensor

Brand Part Number Markets Notes Buy
BH SENS RDE084V21
🇲🇽 MX
OE Quality 433MHZ Replacement SensorNo Programming Required
Fitment notes — BH SENS RDE084V21
OE Quality 433MHZ Replacement SensorNo Programming RequiredFollow OE Relearn Procedure After InstallIncludes RDV021 Silver 43mm Metal Valve
433 MHzwith Dual Rear WheelsInner Rear Wheel
View on
Amazon
BH SENS RDE063V43
🇲🇽 MX
OE Quality 433MHZ Replacement SensorNo Programming Required
Fitment notes — BH SENS RDE063V43
OE Quality 433MHZ Replacement SensorNo Programming RequiredFollow OE Relearn Procedure After InstallIncludes Straight-In Screw Rubber Valve, Replacement Rubber Valve RDV043
Fits:
433 MHzwith Dual Rear WheelsFront & Outer Rear Wheelsor 433 MHzwithout Dual Rear Wheels or with Dual Rear Wheels & Steel WheelsFront & Outer Rear Wheels
View on
Amazon
SCHRADER 29099
🇲🇽 MX
ProgrammedIncludes Mounting Hardware
Fitment notes — SCHRADER 29099
ProgrammedIncludes Mounting HardwareValve Material: Aluminum
Clamp-In433.0 MHzPack of 1
View on
Amazon

This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.

Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit

Brand Part Number Markets Notes Buy
SCHRADER 295002
🇲🇽 MX
Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2
View on
Amazon

This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.

Buying Wheel Parts for a 2018 Ram 4000

On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.

  • Confirm you have the 5.7L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Lug Nut and Lug Nut Lock .

Frequently Asked Questions

How many wheel parts fit the 2018 Ram 4000?

Our catalog currently lists 20 wheel parts for the 2018 Ram 4000 across 5 subcategories and 3 brands, covering the 5.7L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of wheel problems on a 2018 Ram 4000?

Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Ram 4000 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2018 Ram 4000?

Every part on this page is matched to the 5.7L V8 engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2018 Ram 4000

Wheel Parts for Other Ram 4000 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.