This page lists 15 suspension parts for the 2019 Rolls-Royce Wraith, across 5 part types, covering the 6.6L V12 Turbocharged engine. Every part shows its brand, manufacturer part number and fitment notes.
On the 2019 Rolls-Royce Wraith, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. 13 parts of the 15 listed are Control Arm (8 parts), Control Arm Bushing (3 parts) and Sway Bar Link (2 parts). The other 2 part types cover the remaining 2 parts.
Every part on this page is matched to the 6.6L V12 Turbocharged — the only engine offered in the 2019 Rolls-Royce Wraith.
The most listed brands for 2019 Rolls-Royce Wraith suspension parts are MOOG (6 parts), DORMAN (4 parts) and REIN (3 parts), plus 2 more brands. Quality grades include Economy and Daily Driver.
2 parts on this 2019 Rolls-Royce Wraith page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including MOOG RK643049 (Control Arm) and MOOG RK621946 (Control Arm). Click any part number to see every vehicle that part fits.
Air Suspension Solenoid / Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ARNOTT | VB4340 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Air Suspension Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
This group shows a single part: ARNOTT VB4340.
Control Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG Popular | RK643049 | 🇺🇸 US 🇨🇦 CA | Rear Arm To Knuckle (Lower Front)Lateral Arm | View on Amazon |
| MOOG Popular | RK621946 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
| DORMAN | 524505 | 🇺🇸 US 🇨🇦 CA | Fits Rear LeftVertical Track Rod to Lower Control Arm | View on Amazon |
| DORMAN | 524561 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
| DORMAN | 522873 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
| DORMAN | 522874 | 🇺🇸 US 🇨🇦 CA | Complete Arm with Ball Joint | View on Amazon |
| MOOG | RK642869 | 🇺🇸 US 🇨🇦 CA | Rear Left Upper Forward | View on Amazon |
| MOOG | RK642870 | 🇺🇸 US 🇨🇦 CA | Rear Right Forward Upper | View on Amazon |
This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm.
8 Control Arm parts for the 2019 Rolls-Royce Wraith come from 2 brands — MOOG and DORMAN. The "Popular" part is MOOG RK643049.
Part numbers include MOOG RK643049, MOOG RK621946 and DORMAN 524505, among others listed above.
Control Arm Bushing
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG | K201367 | 🇺🇸 US 🇨🇦 CA | Rear Arm To Knuckle (Lower Outer) | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | AVB0670 | 🇺🇸 US 🇨🇦 CA | Rear Lower Outer Forward | View on Amazon |
| REIN | AVB0639 | 🇺🇸 US 🇨🇦 CA | Front Lower Inner Forward | View on Amazon |
This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.
3 Control Arm Bushing parts for the 2019 Rolls-Royce Wraith come from 2 brands — REIN and MOOG.
In the Daily Driver grade, MOOG supplies 1 part: grouped for everyday commuting duty. A representative part number is MOOG K201367.
The Economy section lists 2 options from REIN — the catalog's value-priced group. REIN AVB0670 is listed in this group.
Listed part numbers: MOOG K201367, REIN AVB0670 and REIN AVB0639.
Control Arm Nut
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWN0119 | 🇺🇸 US 🇨🇦 CA | Front Lower Outer16x1.5mm | View on Amazon |
This table covers the Control Arm nuts.
One part is listed for the 2019 Rolls-Royce Wraith — REIN HWN0119.
Sway Bar Link
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOOG | K750409 | 🇺🇸 US 🇨🇦 CA | Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER | K750409 | 🇺🇸 US 🇨🇦 CA | Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement | View on Amazon |
This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it.
2 Sway Bar Link parts for the 2019 Rolls-Royce Wraith come from 2 brands — MOOG and ULTRA-POWER.
Daily Driver: 1 part, from MOOG. A representative part number is MOOG K750409.
The Economy section: 1 option from ULTRA-POWER. ULTRA-POWER K750409 is listed in this group.
Listed part numbers: MOOG K750409, plus the other parts above.
Buying Suspension Parts for a 2019 Rolls-Royce Wraith
On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.
- Confirm you have the 6.6L V12 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Control Arm and Control Arm Bushing .
Frequently Asked Questions
How many suspension parts fit the 2019 Rolls-Royce Wraith?
Our catalog currently lists 15 suspension parts for the 2019 Rolls-Royce Wraith across 5 subcategories and 5 brands, covering the 6.6L V12 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of suspension problems on a 2019 Rolls-Royce Wraith?
Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 Rolls-Royce Wraith was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 Rolls-Royce Wraith?
Every part on this page is matched to the 6.6L V12 Turbocharged engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 Rolls-Royce Wraith
Suspension Parts for Other Rolls-Royce Wraith Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.