The 2021 Rolls-Royce Wraith has 3 steering parts with verified fitment on this page — 2 part types and 1 brand, covering the 6.6L V12 Turbocharged engine. Each part includes a manufacturer part number and application notes.
The steering system on the 2021 Rolls-Royce Wraith connects driver to road through the rack, pump, tie rods, and column components. All 3 listed parts are Tie Rod Assembly (Inner & Outer) (2 parts) and Rack and Pinion Bellow (1 part).
The 2021 Rolls-Royce Wraith came with a single engine, the 6.6L V12 Turbocharged, and every part is verified against it.
Every steering part listed for the 2021 Rolls-Royce Wraith comes from REIN.
Each part number listed for the 2021 Rolls-Royce Wraith opens a page with every vehicle that part fits.
Rack and Pinion Bellow
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | BKP0105R | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the rubber boots that seal the inner tie-rod joints on the rack.
This group shows a single part: REIN BKP0105R.
Tie Rod Assembly (Inner & Outer)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | SCT0379 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| REIN | SCT0378 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
This table covers complete inner-and-outer tie-rod assemblies.
REIN supplies both parts for the 2021 Rolls-Royce Wraith.
Part numbers include REIN SCT0379 and REIN SCT0378.
Buying Steering Parts for a 2021 Rolls-Royce Wraith
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Confirm you have the 6.6L V12 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tie Rod Assembly (Inner & Outer) and Rack and Pinion Bellow .
Frequently Asked Questions
How many steering parts fit the 2021 Rolls-Royce Wraith?
Our catalog currently lists 3 steering parts for the 2021 Rolls-Royce Wraith across 2 subcategories and 1 brand, covering the 6.6L V12 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of steering problems on a 2021 Rolls-Royce Wraith?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2021 Rolls-Royce Wraith was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2021 Rolls-Royce Wraith?
Every part on this page is matched to the 6.6L V12 Turbocharged engine. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2021 Rolls-Royce Wraith
Steering Parts for Other Rolls-Royce Wraith Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.