1962 Saab 96 Suspension Parts

Engine:
841cc L3

This page lists 3 suspension parts for the 1962 Saab 96, across 2 part types, covering the 841cc L3 engine. Every part shows its brand, manufacturer part number and fitment notes.

The suspension system on the 1962 Saab 96 controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. All 3 listed parts are Shock / Strut (2 parts) and Coil Spring (1 part).

Coil Spring

Brand Part Number Markets Notes Buy
LESJÖFORS 4277806
🇺🇸 US
RearHeavy Duty
View on
Amazon

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out.

Shock / Strut

Brand Part Number Markets Notes Buy
KYB KG4616
🇺🇸 US
Gas-A-Just Monotube
Fitment notes — KYB KG4616
Gas-A-Just Monotube
Rear
View on
Amazon
KYB KG4524
🇺🇸 US
Gas-A-Just Monotube
Fitment notes — KYB KG4524
Gas-A-Just Monotube
Front
View on
Amazon

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed.

Buying Suspension Parts for a 1962 Saab 96

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Confirm you have the 841cc L3 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Shock / Strut and Coil Spring .

Frequently Asked Questions

How many suspension parts fit the 1962 Saab 96?

Our catalog currently lists 3 suspension parts for the 1962 Saab 96 across 2 subcategories and 2 brands, covering the 841cc L3 engine. Each part is matched to the engine(s) it fits.

What are the signs of suspension problems on a 1962 Saab 96?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1962 Saab 96 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1962 Saab 96?

Every part on this page is matched to the 841cc L3 engine. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1962 Saab 96

Suspension Parts for Other Saab 96 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.