1963 Saab 96 Electrical Parts

Engine:
841cc L3

The 1963 Saab 96 has 16 electrical parts with verified fitment on this page — 7 part types and 9 brands, covering the 841cc L3 engine. Each part includes a manufacturer part number and application notes.

The electrical system on the 1963 Saab 96 covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. The largest groups are Alternator / Generator End Bearing (4 parts), Battery (4 parts) and Battery Cable (3 parts). The other 4 part types cover the remaining 5 parts.

Alternator / Generator End Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS RB6202
🇺🇸 US
with Bosch AlternatorOpen Design
Fitment notes — WJB / INMOTION PARTS RB6202
with Bosch AlternatorOpen DesignDrive End
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA NB202
🇺🇸 US
with Bosch AlternatorDrive End
View on
Amazon
NATIONAL 202
🇺🇸 US
Open Designwith Bosch Alternator
Fitment notes — NATIONAL 202
Open Designwith Bosch AlternatorDrive End
View on
Amazon
Brand Part Number Markets Notes Buy
NATIONAL 202
🇺🇸 US 🇨🇦 CA
Fits FrontBOSCH Alternator
Fitment notes — NATIONAL 202
Fits:
FrontBOSCH AlternatorOPEN DESIGN
or:
FrontOpen Designwith Bosch Alternator
View on
Amazon

This table covers the bearings in the alternator housing. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Battery

AGM (Extended Life)

Brand Part Number Markets Notes Buy
BOSCH S6594B
🇺🇸 US
AGM
View on
Amazon
DEKA 9A51RT
🇺🇸 US
AGMIntimidator
Fitment notes — DEKA 9A51RT
AGMIntimidatorBCI Group 51R500 CCALength X Width X Height: 9.3125 In x 5 In x 8.625 In
View on
Amazon
EXIDE MX51R
🇺🇸 US
Marathon MaxBCI Group 51R
Fitment notes — EXIDE MX51R
Marathon MaxBCI Group 51RCCA: 43575 Minute Reserve CapacityAGM(LxWxH) 9.31" x 4.94" x 8.63"
View on
Amazon

Performance AGM (Extended Life + Increased Power)

Brand Part Number Markets Notes Buy
FULLRIVER FT62051
🇺🇸 US
BCI Group 51(Length X Width X Height) 9.02 In x 5.43 In x 9.06 In
Fitment notes — FULLRIVER FT62051
BCI Group 51(Length X Width X Height) 9.02 In x 5.43 In x 9.06 InAGMCCA: 620
View on
Amazon

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery.

Battery Cable

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS 7484C
🇺🇸 US
Battery Cable Configuration: Top MountFederal Wire
Fitment notes — STANDARD MOTOR PRODUCTS 7484C
Battery Cable Configuration: Top MountFederal Wire
PositiveBATTERY TO SWITCH
View on
Amazon
STANDARD MOTOR PRODUCTS A484
🇺🇸 US
Material: Die cast lead terminal
Fitment notes — STANDARD MOTOR PRODUCTS A484
Material: Die cast lead terminal
PositiveBATTERY TO SWITCH
View on
Amazon
STANDARD MOTOR PRODUCTS B29E
🇺🇸 US
NegativeBATTERY TO GROUND
View on
Amazon

This table covers the positive and ground cables that run from the battery. Typical signs include a stretched or frayed cable, or a control that no longer reaches the end of its travel. Route the new cable through the same clips. A kinked cable binds and fails early.

Flasher

Brand Part Number Markets Notes Buy
TRIDON / NOVITA LF12
🇺🇸 US
Loud Flasher2 Terminal
View on
Amazon
TRIDON / NOVITA LF12K
🇺🇸 US
Loud Flasher
Fitment notes — TRIDON / NOVITA LF12K
Loud Flasher
Kit
View on
Amazon

This table covers the flasher units that blink the turn signals and hazards.

Starter Brush

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS GB288
🇺🇸 US
View on
Amazon

This table covers the brushes inside the starter motor.

Starter Bushing

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS X5413
🇺🇸 US
DE Starter BushingOuter Diameter (O.D.) - Inches: .634"
Fitment notes — STANDARD MOTOR PRODUCTS X5413
DE Starter BushingOuter Diameter (O.D.) - Inches: .634"Material: BrassLength - Inches: .627"Inner Diameter (I.D.) - Inches: .474"
Starter Number 0001311023, 026, 039Drive Endvendor # Bosch
View on
Amazon

This table covers the Starter bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles.

Voltage Regulator

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS VR39
🇺🇸 US
View on
Amazon

This table covers the regulators that control alternator output voltage.

Buying Electrical Parts for a 1963 Saab 96

On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.

  • Confirm you have the 841cc L3 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Alternator / Generator End Bearing and Battery .

Frequently Asked Questions

How many electrical parts fit the 1963 Saab 96?

Our catalog currently lists 16 electrical parts for the 1963 Saab 96 across 7 subcategories and 9 brands, covering the 841cc L3 engine. Each part is matched to the engine(s) it fits.

What are the signs of electrical problems on a 1963 Saab 96?

Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1963 Saab 96 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1963 Saab 96?

Every part on this page is matched to the 841cc L3 engine. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1963 Saab 96

Electrical Parts for Other Saab 96 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.