9 Drivetrain parts are listed for the 1972 Saab 96, in 2 part types, covering the 1.7L V4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1972 Saab 96, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. All 9 listed parts are Differential Carrier Bearing / Race (8 parts) and Differential Seal (1 part).
Every part on this page is matched to the 1.7L V4 — the only engine offered in the 1972 Saab 96.
The most listed brands for 1972 Saab 96 drivetrain parts are WJB / INMOTION PARTS (2 parts), TIMKEN (2 parts) and BCA (2 parts), plus 2 more brands. Quality grades include Standard Replacement and Economy.
2 parts on this 1972 Saab 96 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including TIMKEN LM29710 (Differential Carrier Bearing / Race) and TIMKEN LM29749 (Differential Carrier Bearing / Race). Click any part number to see every vehicle that part fits.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | RB6007 | 🇺🇸 US | RightManual trans. | View on Amazon |
| WJB / INMOTION PARTS | RB6208 | 🇺🇸 US | LeftManual trans. | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Popular | LM29710 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| TIMKEN Popular | LM29749 | 🇺🇸 US 🇨🇦 CA | Borg Warner T269U, T35RB, T393K, T399RAutomatic Trans. | View on Amazon |
| BCA | NB107 | 🇺🇸 US | RightManual trans. | View on Amazon |
| BCA | NB208 | 🇺🇸 US | LeftManual trans. | View on Amazon |
| NATIONAL | 107 | 🇺🇸 US | RightManual trans. | View on Amazon |
| NATIONAL | 208 | 🇺🇸 US | LeftManual trans. | View on Amazon |
This table covers the bearings and races that support the differential carrier.
8 Differential Carrier Bearing / Race parts for the 1972 Saab 96 come from 4 brands — WJB / INMOTION PARTS, TIMKEN, BCA and 1 other brand. The "Popular" part is TIMKEN LM29710.
The Economy section lists 2 options from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS RB6007 is listed in this group.
In the Standard Replacement grade, TIMKEN, BCA and NATIONAL supply 6 parts: built to original-equipment specification. A representative part number is TIMKEN LM29710.
Part numbers include TIMKEN LM29710, WJB / INMOTION PARTS RB6007 and WJB / INMOTION PARTS RB6208, among others listed above.
Differential Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER | SS2450 | 🇺🇸 US 🇨🇦 CA | 3 speed trans.Trans. code T35 | View on Amazon |
This table covers the seals at the Differential. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 1972 Saab 96 — SCHAEFFLER SS2450.
Buying Drivetrain Parts for a 1972 Saab 96
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Confirm you have the 1.7L V4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Carrier Bearing / Race and Differential Seal .
Frequently Asked Questions
How many drivetrain parts fit the 1972 Saab 96?
Our catalog currently lists 9 drivetrain parts for the 1972 Saab 96 across 2 subcategories and 5 brands, covering the 1.7L V4 engine. Each part is matched to the engine(s) it fits.
What are the signs of drivetrain problems on a 1972 Saab 96?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Saab 96 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1972 Saab 96?
Every part on this page is matched to the 1.7L V4 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1972 Saab 96
Drivetrain Parts for Other Saab 96 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.