1974 Saab 99 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts are listed for the 1974 Saab 99, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Listed part numbers: ITM ENGINE COMPONENTS 4B9023 and PROFESSIONAL PARTS SWEDEN 21347650.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1974 Saab 99 — AJUSA 54043700.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: ITM ENGINE COMPONENTS 5M9144.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1974 Saab 99 — BECK/ARNLEY 0523222.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

6 Crankshaft Repair Sleeve parts for the 1974 Saab 99 come from 3 brands — NATIONAL, WJB / INMOTION PARTS and BCA. The "Popular" part is NATIONAL 99363.

Listed part numbers: NATIONAL 99363, WJB / INMOTION PARTS WS99189 and BCA NS99189, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 1974 Saab 99 come from 7 brands — ELRING, VICTOR REINZ, NATIONAL and 4 other brands. The "Popular" part is ELRING 330965.

Part numbers include ELRING 330965, NATIONAL 3772 and BCA NS3772, among others listed above.

This table covers the Crankshaft Thrust washers. Read more

2 Crankshaft Thrust Washer parts are listed for the 1974 Saab 99, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Listed part numbers: ITM ENGINE COMPONENTS 1T9127 and PROFESSIONAL PARTS SWEDEN 21347270.

This table covers the bolts that clamp the cylinder head to the block. Read more

One part is listed for the 1974 Saab 99 — AJUSA 81012600.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 1974 Saab 99, from VICTOR REINZ, AJUSA and ITM ENGINE COMPONENTS.

Listed part numbers: AJUSA 10055200, ITM ENGINE COMPONENTS 0949100 and VICTOR REINZ 612332510, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 1974 Saab 99, from AJUSA, PROFESSIONAL PARTS SWEDEN and VICTOR REINZ.

This group includes AJUSA 52078500, PROFESSIONAL PARTS SWEDEN 21347296 and VICTOR REINZ 022583505.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 1974 Saab 99 — AJUSA 50089300.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ITM ENGINE COMPONENTS RX34709.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 1974 Saab 99, from DAYCO and PIONEER.

This group includes DAYCO PB1327N and PIONEER DA2000.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts are listed for the 1974 Saab 99, from AJUSA, ITM ENGINE COMPONENTS, PROFESSIONAL PARTS SWEDEN and 1 other brand. ITM ENGINE COMPONENTS 0959100 carries the "Popular" badge.

Listed part numbers: ITM ENGINE COMPONENTS 0959100, AJUSA 13050300 and AJUSA 13054300, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1974 Saab 99 — AJUSA 21012200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 1974 Saab 99 come from 8 brands — BOSCH, VARIOUS MFR, MOTORCRAFT and 5 other brands. The "Popular" part is MOBIL M1102A.

The Economy section lists 3 options from BOSCH, FRAM and VARIOUS MFR — the catalog's value-priced group. BOSCH 72161WS is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1102A is listed in this group.

In the Standard Replacement grade, MOTORCRAFT, HASTINGS / BALDWIN, BOSCH and 3 other brands supply 8 parts: built to original-equipment specification. A representative part number is BOSCH 3330.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts for the 1974 Saab 99 come from 5 brands — FEL-PRO, AJUSA, ELRING and 2 other brands. The "Popular" part is FEL-PRO OS30659.

Part numbers include FEL-PRO OS30659, AJUSA 14031200 and ELRING 514943, among others listed above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: ITM ENGINE COMPONENTS RB4519.