1978 Saab 99 Automatic Transmission Parts

This table covers the apply bands inside the automatic transmission. Read more

This group shows a single part: PIONEER 767030.

This table covers the Clutch Plate and Housing assemblies. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 41341239S.

This table covers the Extension Housing bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Extension Housing Bushing parts are listed for the 1978 Saab 99, from ATP and PIONEER.

Listed part numbers: ATP FB12 and PIONEER 755176.

This table covers the seals at the Extension Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Extension Housing Seal parts for the 1978 Saab 99 come from 2 brands — ATP and PIONEER.

Listed part numbers: ATP RO4, ATP KO3 and PIONEER 759044, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

4 Filter parts are listed for the 1978 Saab 99, from ATP and PIONEER.

Listed part numbers: ATP JX150, ATP JX151 and ATP IL150, plus the other parts above.

This table covers the gaskets that seal the Fluid Pan. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Fluid Pan Gasket parts are listed for the 1978 Saab 99, from ATP and PIONEER.

This group includes ATP RG6, ATP RG1 and PIONEER 749033 and the remaining parts above.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

This group shows a single part: SKF 99168.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Fluid Pump Seal parts for the 1978 Saab 99 come from 3 brands — ATP, PIONEER and SKF.

Part numbers include ATP RO1, PIONEER 759043 and SKF 16692.

This table covers the governors and modulators that control transmission shift pressure. Read more

One part is listed for the 1978 Saab 99 — ATP RX20.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts are listed for the 1978 Saab 99, from BCA, NATIONAL, SKF and 1 other brand.

Part numbers include BCA NS99139 and NATIONAL 99139, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts are listed for the 1978 Saab 99, from BCA, NATIONAL, SKF and 1 other brand.

Listed part numbers: BCA NS223510, NATIONAL 223510 and SKF 13945, plus the other parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Pinion Bearing parts for the 1978 Saab 99 come from 6 brands — WJB / INMOTION PARTS, ACDELCO, BCA and 3 other brands. The "Popular" part is WJB / INMOTION PARTS WTA35.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA35 is listed in this group.

In the Standard Replacement grade, ACDELCO, BCA, NATIONAL and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ACDELCO A35.

Listed part numbers: WJB / INMOTION PARTS WTA35, ACDELCO A35 and BCA NBA35, plus the other parts above.

This table covers the seals at the Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Pinion Seal parts are listed for the 1978 Saab 99, from SCHAEFFLER and TIMKEN.

Listed part numbers: SCHAEFFLER LM501310 and TIMKEN 19268.

This table covers the rebuild kits for this assembly. Read more

8 Rebuild Kit parts for the 1978 Saab 99 come from 2 brands — ATP and PIONEER. The "Popular" part is ATP RM4.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, ATP and PIONEER supply 4 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is ATP RM4.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 4 options from ATP and PIONEER — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. ATP RGS6 is listed in this group.

Part numbers include ATP RM4, PIONEER 752071 and ATP RM5, among others listed above.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts for the 1978 Saab 99 come from 3 brands — SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SR3491, TIMKEN KWK99168 and WJB / INMOTION PARTS WS99168.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Torque Converter Shaft Seal parts for the 1978 Saab 99 come from 3 brands — TIMKEN, WJB / INMOTION PARTS and NATIONAL. The "Popular" part is NATIONAL 473234.

Part numbers include NATIONAL 473234 and TIMKEN 480479H, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

VALVOLINE supplies the 3 Transmission Fluid parts for the 1978 Saab 99.

Listed part numbers: VALVOLINE VV3246, VALVOLINE 773775 and VALVOLINE 881051.