514 Engine parts are listed for the 2008 Saturn Aura, in 90 part types, covering all 4 engine options (2.4L L4, 2.4L L4 ELECTRIC/GAS, 3.5L V6 and 3.6L V6). Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2008 Saturn Aura covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Timing Chain Guide / Damper (36 parts), Variable Valve Timing (VVT) Sprocket (34 parts) and Oil (28 parts). The other 87 part types cover the remaining 416 parts.
The 2008 Saturn Aura was sold with 4 engines. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
70 brands supply engine parts for the 2008 Saturn Aura, led by GM GENUINE (89 parts), MELLING (35 parts) and INA (24 parts), plus 67 more brands. Quality grades include Standard Replacement, Economy and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2008 Saturn Aura. 92 parts have it, including ENGINETECH BB133J (Connecting Rod Bearing) and ENGINETECH GM217CSA (Conversion / Lower Gasket Set). Each part number opens a page with every vehicle that part fits.
Camshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12638402 | 🇺🇸 US 🇨🇦 CA | Includes Ring | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19431713 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
This table covers the camshafts that open the valves.
GM GENUINE supplies both parts for the 2008 Saturn Aura.
Part numbers include GM GENUINE 12638402 and GM GENUINE 19431713.
Camshaft Alignment Tool
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LISLE Fits: 3.6L V6 | 37530 | 🇺🇸 US 🇨🇦 CA | GM | View on Amazon |
This table covers the Camshaft Alignment tools. This is a service tool, not a wear part — match the application in the notes.
This group shows a single part: LISLE 37530.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.6L V6 | 15095800 | 🇺🇸 US 🇨🇦 CA | 50 x 70 x 11Clockwise | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12574477 | 🇺🇸 US 🇨🇦 CA | Camshaft Sprocket Seal | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 2008 Saturn Aura come from 2 brands — AJUSA and GM GENUINE.
This group includes AJUSA 15095800 and GM GENUINE 12574477.
Connecting Rod
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.6L V6 | ECR327 | 🇺🇸 US | Reconditioned | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | ECR328 | 🇺🇸 US 🇨🇦 CA | Reconditioned | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12608432 | 🇺🇸 US 🇨🇦 CA | Contains Rod, Bolts, Bushing | View on Amazon |
This table covers the connecting rods between each piston and the crankshaft.
3 Connecting Rod parts are listed for the 2008 Saturn Aura, from ENGINETECH and GM GENUINE.
Part numbers include ENGINETECH ECR327, ENGINETECH ECR328 and GM GENUINE 12608432.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826XPX | 🇺🇸 US 🇨🇦 CA | PmaxblackSet | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826XP | 🇺🇸 US 🇨🇦 CA | SetPmaxblack | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | BB133J | 🇺🇸 US | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | CB1877A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | CB1877A6 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12636003 | 🇺🇸 US 🇨🇦 CA | Use with 2004-11 | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.6L V6 | CR6826SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | CB1879A6 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | CB1879A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Pair | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | 5070A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SEALED POWER Fits: 3.6L V6 | 65070A | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
11 Connecting Rod Bearing parts are listed for the 2008 Saturn Aura, from MAHLE / CLEVITE, KING ENGINE BEARINGS, SEALED POWER and 2 other brands. ENGINETECH BB133J carries the "Popular" badge.
In the High Performance grade, KING ENGINE BEARINGS supplies 2 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6826XPX.
The Standard Replacement section lists 9 options from MAHLE / CLEVITE, SEALED POWER, ENGINETECH and 2 other brands — built to original-equipment specification. ENGINETECH BB133J is listed in this group.
Connecting Rod Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11519680 | 🇺🇸 US 🇨🇦 CA | M9X1X53 | View on Amazon |
This table covers the Connecting Rod bolts.
This group shows a single part: GM GENUINE 11519680.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | GM217CSA | 🇺🇸 US | View on Amazon | |
| FEL-PRO Popular Fits: 3.6L V6 | CS263761 | 🇺🇸 US 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| AJUSA Fits: 3.6L V6 | 54285100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.6L V6 | ACS11064 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.6L V6 | 966550 | 🇺🇸 US 🇨🇦 CA | with Crankshaft Seal, Integrated Shaft Seal | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0929106 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.6L V6 | CS54661 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.6L V6 | SKCS263761 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.6L V6 | 081008601 | 🇺🇸 US 🇨🇦 CA | Improved Design | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
9 Conversion / Lower Gasket Set parts are listed for the 2008 Saturn Aura, from ENGINETECH, FEL-PRO, AJUSA and 6 other brands. ENGINETECH GM217CSA carries the "Popular" badge.
This group includes ENGINETECH GM217CSA, FEL-PRO CS263761 and AJUSA 54285100 and the remaining parts above.
Crankshaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.6L V6 | 112950 | 🇺🇸 US | Includes Connecting Rod Bearings & Crankshaft Main BearingsReman | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12623074 | 🇺🇸 US 🇨🇦 CA | Uses Balancer with Key | View on Amazon |
This table covers the crankshafts that turn piston motion into rotation.
2 Crankshaft parts are listed for the 2008 Saturn Aura, from ENGINETECH and GM GENUINE.
Listed part numbers: ENGINETECH 112950 and GM GENUINE 12623074.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.6L V6 | MB4272XP | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Popular Fits: 3.6L V6 | MB4272SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | MS2276A | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | BC130J | 🇺🇸 US | Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12648786 | 🇺🇸 US 🇨🇦 CA | Contains ONE Upper and Lower | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12648787 | 🇺🇸 US 🇨🇦 CA | Except Brazil (CV2)Cap Side | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | IROX7464MA | 🇺🇸 US 🇨🇦 CA | A-Series aluminum bearingsIROX: Special Polymer Coating | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
7 Crankshaft Main Bearing parts for the 2008 Saturn Aura come from 5 brands — KING ENGINE BEARINGS, GM GENUINE, MAHLE / CLEVITE and 2 other brands. The "Popular" part is KING ENGINE BEARINGS MB4272SI.
The High Performance section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB4272XP is listed in this group.
Standard Replacement: 6 parts, from GM GENUINE, KING ENGINE BEARINGS, MAHLE / CLEVITE and 2 other brands. A representative part number is KING ENGINE BEARINGS MB4272SI.
This group includes KING ENGINE BEARINGS MB4272SI, KING ENGINE BEARINGS MB4272XP and MAHLE / CLEVITE MS2276A and the remaining parts above.
Crankshaft Main Bearing Cap Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12560272 | 🇺🇸 US 🇨🇦 CA | M10X2X102.5 | View on Amazon |
This table covers the Crankshaft Main Bearing Cap bolts.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12560272.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.6L V6 | NS99166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 99166 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS99166 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter Minimum (In): 1.647 In | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
3 Crankshaft Repair Sleeve parts for the 2008 Saturn Aura come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS99166, NATIONAL 99166 and WJB / INMOTION PARTS WS99166.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | BS40711 | 🇺🇸 US 🇨🇦 CA | PTFE Rubber Seal | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12608750 | 🇺🇸 US 🇨🇦 CA | Material: Steel Fluoro ElastomerSeal Type: Spring Loaded Multi Lip | View on Amazon |
| NATIONAL Popular Fits: 3.6L V6 | 710674 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX Fits: 3.6L V6 | ABS1164 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ELRING Fits: 3.6L V6 | 943150 | 🇺🇸 US 🇨🇦 CA | Radial Shaft Seal Design: AwithBS ofSwirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.6L V6 | 966540 | 🇺🇸 US 🇨🇦 CA | Radial Shaft Seal Design: A/BSwirl Type: Left-hand Twist | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12637710 | 🇺🇸 US 🇨🇦 CA | Seal Type: Spring Loaded Multi LipIncludes Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | JV1716 | 🇺🇸 US 🇨🇦 CA | Includes Retainer PlateSet | View on Amazon |
| NATIONAL Fits: 3.6L V6 | 710855 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKF Fits: 3.6L V6 | 38085 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| TIMKEN Fits: 3.6L V6 | SL260014 | 🇺🇸 US 🇨🇦 CA | 1.969 in. Shaft Size2.752 in. Bore | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 191001101 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710674 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS710855 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
14 Crankshaft Seal parts for the 2008 Saturn Aura come from 10 brands — GM GENUINE, NATIONAL, ELRING and 7 other brands. The "Popular" part is FEL-PRO BS40711.
Crankshaft Seal Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 966530 | 🇺🇸 US 🇨🇦 CA | Frontal sided, engine sided, Water Pump | View on Amazon |
This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2008 Saturn Aura — ELRING 966530.
Cylinder Head
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12641093 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12641095 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19259025 | 🇺🇸 US 🇨🇦 CA | RemanIncludes Valves, Springs, Retainers, Oil Manifold Valves, Camshaft Thrust Washers | View on Amazon |
This table covers the cylinder heads that close the top of the block.
3 Cylinder Head parts for the 2008 Saturn Aura come from GM GENUINE.
Part numbers include GM GENUINE 12641093, GM GENUINE 12641095 and GM GENUINE 19259025.
Cylinder Head Alignment Dowel Pin
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12570326 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Cylinder Head Alignment Dowel pins.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12570326.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | HB258 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.6L V6 | ES722741 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | GS33676 | 🇺🇸 US 🇨🇦 CA | Cylinder Head Bolt KitSet | View on Amazon |
| AJUSA Fits: 3.6L V6 | 81051900 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.6L V6 | AHB1164 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | ES72274 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 19352499 | 🇺🇸 US 🇨🇦 CA | M11X2X152 | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 90537691 | 🇺🇸 US 🇨🇦 CA | M11X1.5X163 | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 10009836 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| SKP Fits: 3.6L V6 | SKES72274 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.6L V6 | 141009701 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 143229301 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 141013901 | 🇺🇸 US 🇨🇦 CA | SetImproved Design | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
13 Cylinder Head Bolt parts are listed for the 2008 Saturn Aura, from VICTOR REINZ, FEL-PRO, GM GENUINE and 6 other brands. ENGINETECH HB258 carries the "Popular" badge.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12634479 | 🇺🇸 US 🇨🇦 CA | Cylinder Bore Diameter: 3.76 In | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12648843 | 🇺🇸 US 🇨🇦 CA | Cylinder Bore Diameter: 3.76 In | View on Amazon |
| ULTRA-POWER Popular Fits: 3.6L V6 | 26376PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| APEX Fits: 3.6L V6 | AHG1164L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| APEX Fits: 3.6L V6 | AHG1164R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ELRING Fits: 3.6L V6 | 507760 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ELRING Fits: 3.6L V6 | 507840 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 26377PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 26376PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0940309 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 54661 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 54662 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 611041900 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 611042000 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
14 Cylinder Head Gasket parts are listed for the 2008 Saturn Aura, from GM GENUINE, APEX, ELRING and 5 other brands. GM GENUINE 12634479 carries the "Popular" badge.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | GM217HSQ | 🇺🇸 US | Multi-Layer Steel Head Gaskets | View on Amazon |
| ULTRA-POWER Popular Fits: 3.6L V6 | HS26376PT2 | 🇺🇸 US 🇨🇦 CA | Head Bolts Not IncludedHead Bolt Replacement Recommended | View on Amazon |
| AJUSA Fits: 3.6L V6 | 52534800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.6L V6 | AHS11076 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.6L V6 | GM217HSQWB | 🇺🇸 US | Includes Head BoltsMulti-Layer Steel Head Gaskets | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | HS26376PT2 | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | HS26376PT2VK | 🇺🇸 US 🇨🇦 CA | Includes Head Bolts, Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | HS54661C | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 021011501 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
9 Cylinder Head Gasket Set parts are listed for the 2008 Saturn Aura, from ENGINETECH, FEL-PRO, ULTRA-POWER and 4 other brands. ENGINETECH GM217HSQ carries the "Popular" badge.
Part numbers include ENGINETECH GM217HSQ, ULTRA-POWER HS26376PT2 and AJUSA 52534800, among others listed above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 3.6L V6 | 11811 | 🇺🇸 US 🇨🇦 CA | Engine Heater Cartridge | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
This group shows a single part: KAT'S HEATERS 11811.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 3.6L V6 | GM1228133 | 🇺🇸 US 🇨🇦 CA | Right Lower | View on Amazon |
| TECHPRO Fits: 3.6L V6 | GM1228132 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| TECHPRO Fits: 3.6L V6 | GM1228119 | 🇺🇸 US 🇨🇦 CA | CenterLower | View on Amazon |
| VARIOUS MFR Fits: 3.6L V6 | GM1228133 | 🇺🇸 US 🇨🇦 CA | Right Lower | View on Amazon |
This table covers the Engine covers.
4 Engine Cover parts are listed for the 2008 Saturn Aura, from TECHPRO and VARIOUS MFR.
This group includes TECHPRO GM1228133, TECHPRO GM1228132 and TECHPRO GM1228119 and the remaining parts above.
Engine Cover Retainer / Clip
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11588327 | 🇺🇸 US 🇨🇦 CA | 10.23 Diameter X 8 | View on Amazon |
This table covers the Engine Cover retainers and clips.
This group shows a single part: GM GENUINE 11588327.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.6L V6 | 50493200 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.6L V6 | GM217K11 | 🇺🇸 US | Kit contains (1) head Set and (1) lower Setwith MLS head gaskets | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts are listed for the 2008 Saturn Aura, from AJUSA and ENGINETECH.
This group includes AJUSA 50493200 and ENGINETECH GM217K11.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.6L V6 | V3082 | 🇺🇸 US 🇨🇦 CA | with 1.205 IN Head Diameter | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | V4431 | 🇺🇸 US | .2343 stem1.205 Head | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12575354 | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 1013335 | 🇺🇸 US 🇨🇦 CA | 1.205 Head Dia. 0.2344 Stem. Nitrided | View on Amazon |
| SBI Fits: 3.6L V6 | 13082 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Exhaust Valve parts for the 2008 Saturn Aura come from 5 brands — MELLING, ENGINETECH, GM GENUINE and 2 other brands. The "Popular" part is MELLING V3082.
This group includes MELLING V3082, ENGINETECH V4431 and GM GENUINE 12575354 and the remaining parts above.
Expansion Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11569584 | 🇺🇸 US 🇨🇦 CA | LowerCup Diameter 34.4mm | View on Amazon |
This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11569584.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12697768 | 🇺🇸 US 🇨🇦 CA | Single Belt with Keyway | View on Amazon |
| ATP Fits: 3.6L V6 | 102366 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.6L V6 | PB1509N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
| DORMAN Fits: 3.6L V6 | 594420 | 🇺🇸 US 🇨🇦 CA | with Keywaywith Single Belt | View on Amazon |
| PIONEER Fits: 3.6L V6 | DA6008 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
5 Harmonic Balancer parts are listed for the 2008 Saturn Aura, from GM GENUINE, ATP, DAYCO and 2 other brands. GM GENUINE 12697768 carries the "Popular" badge.
This group includes GM GENUINE 12697768, ATP 102366 and DAYCO PB1509N and the remaining parts above.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 595005 | 🇺🇸 US 🇨🇦 CA | M14 X 1.50 X 48.4 mm | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11549124 | 🇺🇸 US 🇨🇦 CA | M14X1.5X48.4 | View on Amazon |
This table covers the Harmonic Balancer bolts.
2 Harmonic Balancer Bolt parts for the 2008 Saturn Aura come from 2 brands — DORMAN and GM GENUINE.
This group includes DORMAN 595005 and GM GENUINE 11549124.
Intake Manifold
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12705324 | 🇺🇸 US 🇨🇦 CA | LowerNEW | View on Amazon |
This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone.
This group shows a single part: GM GENUINE 12705324.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.6L V6 | AMS11644 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.6L V6 | MS96969 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12575836 | 🇺🇸 US 🇨🇦 CA | OVAL SHAPE | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12603028 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12598158 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | MS19605 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 111033101 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Intake Manifold Gasket parts are listed for the 2008 Saturn Aura, from GM GENUINE, APEX, FEL-PRO and 2 other brands. APEX AMS11644 carries the "Popular" badge.
Listed part numbers: APEX AMS11644, FEL-PRO MS96969 and GM GENUINE 12575836, plus the other parts above.
Intake Manifold Runner Control Valve / Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12609301 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Intake Manifold Runner Control Valve solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12609301.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | MS96976 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| ULTRA-POWER Popular Fits: 3.6L V6 | MS96976 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.6L V6 | AMS11643 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12595277 | 🇺🇸 US 🇨🇦 CA | SetContains 2 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | MS19754 | 🇺🇸 US 🇨🇦 CA | Plenum Gasket SetFuel Injection | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 151031101 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Intake Plenum Gasket parts for the 2008 Saturn Aura come from 6 brands — FEL-PRO, ULTRA-POWER, APEX and 3 other brands. The "Popular" part is FEL-PRO MS96976.
This group includes FEL-PRO MS96976 and APEX AMS11643 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12575351 | 🇺🇸 US 🇨🇦 CA | Standard | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | V4432 | 🇺🇸 US | .2346 stem1.456 Head | View on Amazon |
| MELLING Fits: 3.6L V6 | V3081 | 🇺🇸 US 🇨🇦 CA | with 1.457 IN Head Diameter | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 1013334 | 🇺🇸 US 🇨🇦 CA | 1.457 Head Dia. 0.2348 Stem. | View on Amazon |
| SBI Fits: 3.6L V6 | 13081 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
5 Intake Valve parts for the 2008 Saturn Aura come from 5 brands — GM GENUINE, ENGINETECH, MELLING and 2 other brands. The "Popular" part is GM GENUINE 12575351.
This group includes GM GENUINE 12575351, ENGINETECH V4432 and MELLING V3081 and the remaining parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.6L V6 | SKM3097 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.6L V6 | 3097 | 🇺🇸 US 🇨🇦 CA | RightHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.6L V6 | A5354HY | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| PIONEER Fits: 3.6L V6 | 615354 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WESTAR Fits: 3.6L V6 | EM3097 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic Mount | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
5 Motor Mount parts for the 2008 Saturn Aura come from 5 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 2 other brands. The "Popular" part is SKP SKM3097.
The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SKM3097 is listed in this group.
Standard Replacement: 4 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. A representative part number is ANCHOR 3097.
This group includes SKP SKM3097, ANCHOR 3097 and DEA / MARMON RIDE CONTROL A5354HY and the remaining parts above.
Motor Mount Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11589340 | 🇺🇸 US 🇨🇦 CA | M10X1.5X60,28THDSupport Bracket Bolt | View on Amazon |
This table covers the Motor Mount bolts.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11589340.
Motor Mount Bracket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11518621 | 🇺🇸 US 🇨🇦 CA | M10X1.5X30Hex Flange Head | View on Amazon |
This table covers the Motor Mount Bracket bolts.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11518621.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.6L V6 | 301319 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
This group shows a single part: ANCHOR 301319.
Oil
Summary: Notes list SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.6L V6 | 20228 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-305 Liter | View on Amazon |
| MOBIL Popular Fits: 3.6L V6 | 125195 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 5W-30Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 3.6L V6 | 124315 | 🇺🇸 US 🇨🇦 CA | 5W-30Mobil 1 Advanced | View on Amazon |
| IDEMITSU Fits: 3.6L V6 | 30015204750 | 🇺🇸 US | IFG3 5W-30 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: 3.6L V6 | 30013015750 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP1 Quart | View on Amazon |
| IDEMITSU Fits: 3.6L V6 | 30013015953 | 🇺🇸 US | Full Synthetic 5W-30 GF-6/SP5 Quart | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20136 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20226 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 5W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.6L V6 | 20138 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 5W-305 Liter | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 10049 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 5W-301 qt | View on Amazon |
| LUCAS OIL Fits: 3.6L V6 | 18005 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 5W-306 Gallon | View on Amazon |
| MOBIL Fits: 3.6L V6 | 112627 | 🇺🇸 US 🇨🇦 CA | Extended Performance 5W-30Mobil 1 Extended Performance | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | VV955 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 891678 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 904564 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 891670 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 904566 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 5W-305 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 881164 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 5W-30Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Popular Fits: 3.6L V6 | VV1556 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-301 Quart | View on Amazon |
| MOBIL Fits: 3.6L V6 | 103767 | 🇺🇸 US 🇨🇦 CA | High Mileage 5W-30Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.6L V6 | 123842 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 5W-30Synthetic | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | VV179 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-301 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 881163 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage Synthetic Blend SAE 5W-30Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 881169 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 5W-30Easy Pour 5 Quart | View on Amazon |
Synthetic Blend
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.6L V6 | 109290 | 🇺🇸 US | Synthetic BlendAPI SP Specifications | View on Amazon |
| MOBIL Popular Fits: 3.6L V6 | 124407 | 🇺🇸 US 🇨🇦 CA | Super 5W-30Mobil Super | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 797975 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic Blend1 Quart | View on Amazon |
| VALVOLINE Fits: 3.6L V6 | 881159 | 🇺🇸 US 🇨🇦 CA | Daily Protection SAE 5W-30 Synthetic BlendEasy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
28 Oil parts for the 2008 Saturn Aura come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is LIQUI MOLY 20228. Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend are all represented, and Full Synthetic alone accounts for 18 parts.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 66998 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2008 Saturn Aura — DORMAN 66998.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 3.6L V6 | 238 | 🇺🇸 US 🇨🇦 CA | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 3.6L V6 | 153 | 🇺🇸 US 🇨🇦 CA | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
HAYDEN supplies both parts for the 2008 Saturn Aura.
Part numbers include HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 921036 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
| DORMAN Fits: 3.6L V6 | 921037 | 🇺🇸 US 🇨🇦 CA | Tube Only | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12595327 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
3 Oil Dipstick / Tube parts for the 2008 Saturn Aura come from 2 brands — DORMAN and GM GENUINE.
Part numbers include DORMAN 921036, DORMAN 921037 and GM GENUINE 12595327.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 584210 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 6,07 | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 73889 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 24504031 | 🇺🇸 US 🇨🇦 CA | 6.07 ID1.78 Diameter | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Oil Dipstick / Tube Seal parts are listed for the 2008 Saturn Aura, from ELRING, FEL-PRO and GM GENUINE.
Part numbers include ELRING 584210, FEL-PRO 73889 and GM GENUINE 24504031.
Oil Drain Plug
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 090175 | 🇺🇸 US 🇨🇦 CA | 1" LengthIntegrated Gasket | View on Amazon |
Twist Drain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 092018 | 🇺🇸 US 🇨🇦 CA | Thread Size: M12-1.75Twist Style | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 090034 | 🇺🇸 US 🇨🇦 CA | M12 x 1.75 Thread | View on Amazon |
| ELRING Fits: 3.6L V6 | 823400 | 🇺🇸 US 🇨🇦 CA | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 11562588 | 🇺🇸 US 🇨🇦 CA | with SealExc. Magnet | View on Amazon |
| VAICO Fits: 3.6L V6 | V400755 | 🇺🇸 US 🇨🇦 CA | Thread Size: M 12 X 1,75Includes Gasket | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts for the 2008 Saturn Aura come from 4 brands — DORMAN, ELRING, GM GENUINE and 1 other brand. The "Popular" part is DORMAN 090175.
The Economy section: 1 option from DORMAN. DORMAN 090175 is listed in this group.
In the Twist Drain grade, DORMAN supplies 1 part: grouped under the catalog's "Twist Drain" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 092018.
4 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: DORMAN 090175, DORMAN 092018 and DORMAN 090034, plus the other parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12616850 | 🇺🇸 US 🇨🇦 CA | Diameter 19.39 | View on Amazon |
| ULTRA-POWER Popular Fits: 3.6L V6 | 097119 | 🇺🇸 US 🇨🇦 CA | 20 MM O.D.ID: 0.448" | View on Amazon |
| AJUSA Fits: 3.6L V6 | 01288800 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 3.6L V6 | 97119 | 🇺🇸 US 🇨🇦 CA | Rubber GasketRubber | View on Amazon |
| ELRING Fits: 3.6L V6 | 056130 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Outer Diameter [MM]: 20,8 | View on Amazon |
| VAICO Fits: 3.6L V6 | V401110 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Drain Plug Gasket parts are listed for the 2008 Saturn Aura, from GM GENUINE, ULTRA-POWER, AJUSA and 3 other brands. GM GENUINE 12616850 carries the "Popular" badge.
Listed part numbers: GM GENUINE 12616850, ULTRA-POWER 097119 and AJUSA 01288800, plus the other parts above.
Oil Drain Plug Insert
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11503302 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Drain Plug inserts.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11503302.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 3.6L V6 | FC243 | 🇺🇸 US 🇨🇦 CA | GM Original Equipment | View on Amazon |
| GATES Fits: 3.6L V6 | 31103 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORAD Fits: 3.6L V6 | MO99 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.6L V6 | SKMO99 | 🇺🇸 US 🇨🇦 CA | with Plastic cap | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts for the 2008 Saturn Aura come from 4 brands — ACDELCO, GATES, MOTORAD and 1 other brand.
Part numbers include ACDELCO FC243, GATES 31103 and MOTORAD MO99, among others listed above.
Oil Filler Cap Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 592250 | 🇺🇸 US 🇨🇦 CA | SealMaterial: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 3.6L V6 | 823620 | 🇺🇸 US 🇨🇦 CA | SealMaterial: HNBR (hydrogenated nitrile butadiene rubber) | View on Amazon |
| FEL-PRO Fits: 3.6L V6 | 73193 | 🇺🇸 US 🇨🇦 CA | Services OEM bonded Cap sealAftermarket Design | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 24100002 | 🇺🇸 US 🇨🇦 CA | 27.94 mm I.D., Size # 320 | View on Amazon |
This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Filler Cap Gasket parts are listed for the 2008 Saturn Aura, from ELRING, FEL-PRO and GM GENUINE.
Listed part numbers: ELRING 592250, ELRING 823620 and FEL-PRO 73193, plus the other parts above.
Oil Filler Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12650615 | 🇺🇸 US 🇨🇦 CA | Includes Cap, Seals | View on Amazon |
This table covers the Oil Filler tubes.
This group shows a single part: GM GENUINE 12650615.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Fits: 3.6L V6 | FE10060 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 3.6L V6 | R7060 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 3.6L V6 | PXL57060 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PUROLATOR Fits: 3.6L V6 | PL12222 | 🇺🇸 US 🇨🇦 CA | Bypass Relief Valve Setting: 12-15 PSIMedia Material: Enhanced Cellulose | View on Amazon |
| VAICO Fits: 3.6L V6 | V400978 | 🇺🇸 US 🇨🇦 CA | DURAGUARD (without TOP MOUNTED FILTER BYPASS VALVE) | View on Amazon |
| VARIOUS MFR Fits: 3.6L V6 | PG2222 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 3.6L V6 | 57060XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 3.6L V6 | M1113A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.6L V6 | PF48 | 🇺🇸 US 🇨🇦 CA | GM Original EquipmentFilter Media Material: Enhanced Cellulose | View on Amazon |
| BOSCH Popular Fits: 3.6L V6 | 3334 | 🇺🇸 US 🇨🇦 CA | Premium Oil FilterConnection Size: M22X1.5 | View on Amazon |
| WIX Popular Fits: 3.6L V6 | 57060 | 🇺🇸 US 🇨🇦 CA | Spin-On Lube Filter | View on Amazon |
| ACDELCO Fits: 3.6L V6 | PF48B | 🇺🇸 US 🇨🇦 CA | SilverWhite Shell | View on Amazon |
| DENSO Fits: 3.6L V6 | 1502020 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.6L V6 | LF613 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HENGST Fits: 3.6L V6 | H98W | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | OC614 | 🇺🇸 US 🇨🇦 CA | Spin-On | View on Amazon |
| MANN Fits: 3.6L V6 | W7030 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: No | View on Amazon |
| VARIOUS MFR Fits: 3.6L V6 | PG2222EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
18 Oil Filter parts for the 2008 Saturn Aura come from 15 brands — VARIOUS MFR, WIX, ACDELCO and 12 other brands. The "Popular" part is WIX 57060XP.
The Economy section: 6 options from FRAM, FVP, PRO-TEC and 3 other brands. FRAM FE10060 is listed in this group.
The High Performance / Heavy Duty section lists 2 options from WIX and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. WIX 57060XP is listed in this group.
Standard Replacement: 10 parts, from ACDELCO, BOSCH, WIX and 6 other brands. A representative part number is ACDELCO PF48.
Oil Filter Adapter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12600225 | 🇺🇸 US 🇨🇦 CA | Threaded FittingM20XM22 | View on Amazon |
This table covers the Oil Filter adapters.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12600225.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 3.6L V6 | AOM6026 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | 72968 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.6L V6 | B32224 | 🇺🇸 US 🇨🇦 CA | Oil Filter Adapter GasketSteel | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 711460600 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
4 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2008 Saturn Aura, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.
Part numbers include APEX AOM6026, FEL-PRO 72968 and MAHLE / CLEVITE B32224, among others listed above.
Oil Filter Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12687466 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the gaskets that seal the Oil Filter. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12687466.
Oil Filter Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 943050 | 🇺🇸 US 🇨🇦 CA | Engine Side | View on Amazon |
This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING 943050.
Oil Galley Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12667039 | 🇺🇸 US 🇨🇦 CA | Engine BlockPLUG-CUP,9.9OD,1008/1010STEEL | View on Amazon |
This table covers the Oil Galley plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.
This group shows a single part: GM GENUINE 12667039.
Oil Level Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 2133945 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WELLS Fits: 3.6L V6 | 5S3016 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Oil Level Sensor parts for the 2008 Saturn Aura come from 2 brands — GM GENUINE and WELLS.
This group includes GM GENUINE 2133945 and WELLS 5S3016.
Oil Nozzle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12640455 | 🇺🇸 US 🇨🇦 CA | Injector Spray NozzlePiston Nozzle | View on Amazon |
This table covers the Oil nozzles.
This group shows a single part: GM GENUINE 12640455.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.6L V6 | 264377 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| LILAND GLOBAL Fits: 3.6L V6 | IGMP68A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 3.6L V6 | GMP68A | 🇺🇸 US 🇨🇦 CA | GASKET AND/OR SEALANT NOT INCLUDED | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
3 Oil Pan parts are listed for the 2008 Saturn Aura, from DORMAN, LILAND GLOBAL and SPECTRA PREMIUM.
Listed part numbers: DORMAN 264377, LILAND GLOBAL IGMP68A and SPECTRA PREMIUM GMP68A.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VICTOR REINZ Fits: 3.6L V6 | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: VICTOR REINZ 703141410.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.6L V6 | EPK160 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12640448 | 🇺🇸 US 🇨🇦 CA | Includes Bolts | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | M353 | 🇺🇸 US 🇨🇦 CA | Does Not Include Oil Pickup Tube Assembly | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | EP353 | 🇺🇸 US | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0571630 | 🇺🇸 US | View on Amazon | |
| MELLING Fits: 3.6L V6 | M353368S | 🇺🇸 US 🇨🇦 CA | Includes Oil Pickup Tube Assembly | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | 22443667 | 🇺🇸 US 🇨🇦 CA | Does Not Include Oil Pickup Tube Assembly | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 3.6L V6 | GM1423406 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
8 Oil Pump parts for the 2008 Saturn Aura come from 6 brands — ENGINETECH, MELLING, GM GENUINE and 3 other brands. The "Popular" part is GM GENUINE 12640448.
The Economy section: 1 option from ENGINETECH. ENGINETECH EPK160 is listed in this group.
Standard Replacement: 6 parts, from MELLING, GM GENUINE, ENGINETECH and 2 other brands. A representative part number is GM GENUINE 12640448.
1 further part sits outside the graded sections, with the same engine-level match.
This group includes GM GENUINE 12640448, ENGINETECH EPK160 and MELLING M353 and the remaining parts above.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 942400 | 🇺🇸 US 🇨🇦 CA | Suction Pipe | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2008 Saturn Aura — ELRING 942400.
Oil Pump Pickup Tube / Screen
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12640981 | 🇺🇸 US 🇨🇦 CA | with Bracket | View on Amazon |
| MELLING Fits: 3.6L V6 | 368S | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the pickup tubes and screens that feed the oil pump.
2 Oil Pump Pickup Tube / Screen parts are listed for the 2008 Saturn Aura, from GM GENUINE and MELLING.
Listed part numbers: GM GENUINE 12640981 and MELLING 368S.
Oil Pump Pickup Tube O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12691257 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: GM GENUINE 12691257.
Oil Pump Shaft Guide / Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11588327 | 🇺🇸 US 🇨🇦 CA | 10.23 Diameter X 8 | View on Amazon |
This table covers the Oil Pump Shaft Guide retainers.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11588327.
Piston
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.6L V6 | P5067 | 🇺🇸 US | Flat Top with valve reliefsHypereutectic Coated skirt | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 2243625WR | 🇺🇸 US 🇨🇦 CA | with RingsSkirt Coated | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | H1526CP | 🇺🇸 US 🇨🇦 CA | HypereutecticAlloy | View on Amazon |
| SILV-O-LITE Fits: 3.6L V6 | 1758HC | 🇺🇸 US 🇨🇦 CA | Hyper-CoatedFloating Pin Type | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12590866 | 🇺🇸 US 🇨🇦 CA | StandardExcept Brazil (CV2) | View on Amazon |
This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo.
5 Piston parts are listed for the 2008 Saturn Aura, from ENGINETECH, MAHLE / CLEVITE, SEALED POWER and 2 other brands. GM GENUINE 12590866 carries the "Popular" badge.
The Premium section lists 4 options from ENGINETECH, MAHLE / CLEVITE, SEALED POWER and 1 other brand — a step above OE specification in materials, tolerances or warranty terms. ENGINETECH P5067 is listed in this group.
The Standard Replacement section: 1 option from GM GENUINE. GM GENUINE 12590866 is listed in this group.
Listed part numbers: GM GENUINE 12590866, ENGINETECH P5067 and MAHLE / CLEVITE 2243625WR, plus the other parts above.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | S94112 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.6L V6 | 2M5133S | 🇺🇸 US 🇨🇦 CA | Plasma Moly Top Ring1 Cylinder Set | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.6L V6 | 2M5133 | 🇺🇸 US 🇨🇦 CA | Plasma Moly Top RingTop Ring Surface Treatment: Plasma Moly | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | 42076CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Stainless Steel / Cast Iron / Stainless Steel | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | E986K | 🇺🇸 US 🇨🇦 CA | PremiumRing Groove Widths: 1.2mm, 1.5mm, 2.5mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Popular Fits: 3.6L V6 | 2C5133 | 🇺🇸 US 🇨🇦 CA | Full SetTop Ring Surface Treatment: Chrome | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.6L V6 | 2C5133S | 🇺🇸 US 🇨🇦 CA | Chrome Top Ring1 Cylinder Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 0216978 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
8 Piston Ring parts are listed for the 2008 Saturn Aura, from HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 2 other brands. ENGINETECH S94112 carries the "Popular" badge.
The Premium section: 5 options from HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 1 other brand. ENGINETECH S94112 is listed in this group.
The Standard Replacement section: 3 options from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. HASTINGS MANUFACTURING 2C5133 is listed in this group.
This group includes ENGINETECH S94112, HASTINGS MANUFACTURING 2M5133S and HASTINGS MANUFACTURING 2M5133 and the remaining parts above.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 24100294 | 🇺🇸 US 🇨🇦 CA | Optional with 12693909 | View on Amazon |
| MELLING Fits: 3.6L V6 | MR1323 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.6L V6 | 403901 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SBI Fits: 3.6L V6 | 1801323 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustRoller cam follower | View on Amazon |
| SKP Fits: 3.6L V6 | SKMR1323 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
5 Rocker Arm parts for the 2008 Saturn Aura come from 5 brands — GM GENUINE, MELLING, QUALCAST and 2 other brands. The "Popular" part is GM GENUINE 24100294.
This group includes GM GENUINE 24100294, MELLING MR1323 and QUALCAST 403901 and the remaining parts above.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VAICO Fits: 3.6L V6 | V510226 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
This group shows a single part: VAICO V510226.
Timing Cam Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12612839 | 🇺🇸 US 🇨🇦 CA | Includes Bolt, Retainer, Sprocket | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12612838 | 🇺🇸 US 🇨🇦 CA | Includes Bolt, Retainer, Sprocket | View on Amazon |
| INA Fits: 3.6L V6 | ZS0089 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| INA Fits: 3.6L V6 | ZS0090 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the Timing Cam sprockets.
4 Timing Cam Sprocket parts for the 2008 Saturn Aura come from 2 brands — GM GENUINE and INA.
Listed part numbers: GM GENUINE 12612839, GM GENUINE 12612838 and INA ZS0089, plus the other parts above.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12637743 | 🇺🇸 US 🇨🇦 CA | CenterSECONDARY | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | 753 | 🇺🇸 US 🇨🇦 CA | LowerPrimary Timing Chain | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | 754 | 🇺🇸 US 🇨🇦 CA | UpperSecondary Silent Timing Chain | View on Amazon |
| CLOYES Fits: 3.6L V6 | C753 | 🇺🇸 US 🇨🇦 CA | Center Lower | View on Amazon |
| CLOYES Fits: 3.6L V6 | C754 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12637744 | 🇺🇸 US 🇨🇦 CA | CenterPrimary | View on Amazon |
| INA Fits: 3.6L V6 | ZC0192 | 🇺🇸 US 🇨🇦 CA | CenterPrimary Crank to Idler, 96 Chain Links | View on Amazon |
| INA Fits: 3.6L V6 | ZCC753 | 🇺🇸 US 🇨🇦 CA | Timing Chain Type: Silent Chain | View on Amazon |
| INA Fits: 3.6L V6 | ZCC754 | 🇺🇸 US 🇨🇦 CA | Secondary | View on Amazon |
| INA Fits: 3.6L V6 | ZC0236 | 🇺🇸 US 🇨🇦 CA | Idler to Cam2nd Design | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | C1004 | 🇺🇸 US 🇨🇦 CA | LowerPrimary Timing Chain | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | C1005 | 🇺🇸 US 🇨🇦 CA | UpperSecondary Silent Timing Chain | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | C1009 | 🇺🇸 US 🇨🇦 CA | Secondary | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | C1010 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
14 Timing Chain parts are listed for the 2008 Saturn Aura, from INA, GM GENUINE, MELLING and 3 other brands. GM GENUINE 12637743 carries the "Popular" badge.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 3.6L V6 | 76210S | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes 3 Chains, 4 Guides, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| S.A. GEAR Popular Fits: 3.6L V6 | 76210 | 🇺🇸 US 🇨🇦 CA | Does Not Include Camshaft SprocketIncludes 3 Chains, Crank Sprocket, 4 Guides, 2 Idler Sprockets, 2 Tensioner Arms, 3 Tensioners | View on Amazon |
| GATES Fits: 3.6L V6 | CHK122 | 🇺🇸 US 🇨🇦 CA | Includes 3 Timing Chains, 3 Tensioners, 6 Guides, 3 Sprockets, 12 BoltsPrimary Sprockets Only | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.6L V6 | 05393402 | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | TS21004 | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | TS11004 | 🇺🇸 US 🇨🇦 CA | 96 Link Silent Primary Chain with 114 Link Silent Secondary Chains | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 76210V | 🇺🇸 US 🇨🇦 CA | Includes 3 Chains, Crank Sprocket, 4 Guides, 2 Idler Sprockets, 2 Tensioner Arms, 3 Tensioners, 4 VVT Camshafts, 4 VVT Solenoids | View on Amazon |
| SKP Fits: 3.6L V6 | SK90753SX | 🇺🇸 US 🇨🇦 CA | Does Not Include Sprockets | View on Amazon |
| SKP Fits: 3.6L V6 | SK90753S | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Fits: 3.6L V6 | 90753SX | 🇺🇸 US 🇨🇦 CA | Sprockets Not Included | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | 90753S | 🇺🇸 US 🇨🇦 CA | Sprockets Includedwithout Variable Valve Timing (VVT) Sprocket | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | 90753SVVT | 🇺🇸 US 🇨🇦 CA | Includes VVT Sprockets and VVT Solenoids | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | 90753SK3 | 🇺🇸 US 🇨🇦 CA | with VVT Sprockets and VVT Solenoids.with Water Pump | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.6L V6 | 90753SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (4), Timing Chain Tensioner Guide (2) | View on Amazon |
| CLOYES Popular Fits: 3.6L V6 | 90753S | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (4), Timing Chain Tensioner Guide (2), Crankshaft Sprocket, Timing Idler Sprocket (2) | View on Amazon |
| CLOYES Popular Fits: 3.6L V6 | 90753SVVT | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (4), Timing Chain Tensioner Guide (2), Crankshaft Sprocket, Variable Valve Timing (VVT) Sprocket (4), Timing Idler Sprocket (2), Variable Valve Timing (VVT) Solenoid (4) | View on Amazon |
| CLOYES Popular Fits: 3.6L V6 | 90753SK3 | 🇺🇸 US 🇨🇦 CA | With Water PumpIncludes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (4), Timing Chain Tensioner Guide (2), Crankshaft Sprocket, Variable Valve Timing (VVT) Sprocket (4), Timing Idler Sprocket (2), Variable Valve Timing (VVT) Solenoid (4), Water Pump | View on Amazon |
| CLOYES Fits: 3.6L V6 | 90753SWP | 🇺🇸 US 🇨🇦 CA | Includes: Timing Chain (3), Timing Chain Tensioner (3), Timing Chain Guide (4), Timing Chain Tensioner Guide (2), Crankshaft Sprocket, Timing Idler Sprocket (2), Water Pump | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | TS0753 | 🇺🇸 US | without Variable Valve Timing Intake SprocketsFits 2nd design engines with silent upper chains | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12700435 | 🇺🇸 US 🇨🇦 CA | OPTIONAL CHAIN IN KIT | View on Amazon |
| INA Fits: 3.6L V6 | ZC1826500 | 🇺🇸 US 🇨🇦 CA | Kit Contains 3 Chains, 1 Crank Sprocket, 2 Deflector Sprocket, 3 Gaskets, 4 Guides, 2 Tensioner Guides, 3 TensionersDoes Not Include Cam Sprocket | View on Amazon |
| INA Fits: 3.6L V6 | ZC0063K | 🇺🇸 US 🇨🇦 CA | Kit Contains 3 Chains, 3 Gaskets, 4 Guides, 2 Guide Tensioners, 3 TensionersIncludes Chain Protect Additive | View on Amazon |
| MELLING Fits: 3.6L V6 | 3753SX | 🇺🇸 US 🇨🇦 CA | Does Not Include SprocketsIncludes New Tensioner Mounting Bolts and Gaskets | View on Amazon |
| MELLING Fits: 3.6L V6 | 3753S | 🇺🇸 US 🇨🇦 CA | Includes New Tensioner Mounting Bolts and Gaskets | View on Amazon |
| MELLING Fits: 3.6L V6 | 3753SWP | 🇺🇸 US 🇨🇦 CA | Includes Water Pump, New Tensioner Mounting Bolts and Gaskets, New Torque To Yield Water Pump Mounting bolts | View on Amazon |
| MELLING Fits: 3.6L V6 | 3753SVVT | 🇺🇸 US 🇨🇦 CA | Includes Variable Valve Timing (VVT) Sprockets, Bolts, Solenoids, New Tensioner Mounting Bolts and Gaskets | View on Amazon |
| MELLING Fits: 3.6L V6 | 3753SK3 | 🇺🇸 US 🇨🇦 CA | Includes Variable Valve Timing (VVT) Sprockets, Bolts and Solenoids, New Water Pump, Gasket and Mounting bolts, New Tensioner Mounting Bolts and Gaskets | View on Amazon |
| MELLING Fits: 3.6L V6 | TOPK1014 | 🇺🇸 US 🇨🇦 CA | Includes Oil Pump, Variable Valve Timing (VVT) Sprockets, Bolts and Solenoids, New Tensioner Mounting Bolts and Gaskets | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
28 Timing Chain & Component Kit parts for the 2008 Saturn Aura come from 11 brands — MELLING, CLOYES, ULTRA-POWER and 8 other brands. The "Popular" part is S.A. GEAR 76210S. Grades run from Economy through Standard Replacement; Standard Replacement is the most populated section, led by MELLING, CLOYES, INA and 2 other brands.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12623514 | 🇺🇸 US 🇨🇦 CA | RightPIVOT ARM | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12600462 | 🇺🇸 US 🇨🇦 CA | Right2 MOUNTING HOLES | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12600461 | 🇺🇸 US 🇨🇦 CA | Left2 MOUNTING HOLES | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12623513 | 🇺🇸 US 🇨🇦 CA | LeftPIVOT ARM | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12597417 | 🇺🇸 US 🇨🇦 CA | UPPER PRIMARY | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | BG5533 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95548 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95532 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95530 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95533 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95534 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95531 | 🇺🇸 US 🇨🇦 CA | Guide | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12586959 | 🇺🇸 US 🇨🇦 CA | 2 MOUNTING HOLESLOWER PRIMARY | View on Amazon |
| INA Fits: 3.6L V6 | ZG95548 | 🇺🇸 US 🇨🇦 CA | LowerPrimary | View on Amazon |
| INA Fits: 3.6L V6 | ZG95532 | 🇺🇸 US 🇨🇦 CA | RightSecondary | View on Amazon |
| INA Fits: 3.6L V6 | ZG95530 | 🇺🇸 US 🇨🇦 CA | UpperPrimary | View on Amazon |
| INA Fits: 3.6L V6 | ZG95531 | 🇺🇸 US 🇨🇦 CA | LeftSecondary | View on Amazon |
| INA Fits: 3.6L V6 | ZG95534 | 🇺🇸 US 🇨🇦 CA | Fits Tensioner ArmLeft | View on Amazon |
| INA Fits: 3.6L V6 | ZG95533 | 🇺🇸 US 🇨🇦 CA | Fits Tensioner ArmRight | View on Amazon |
| MELLING Fits: 3.6L V6 | BG5548 | 🇺🇸 US 🇨🇦 CA | Right LowerPrimary Timing Chain Guide | View on Amazon |
| MELLING Fits: 3.6L V6 | BG5532 | 🇺🇸 US 🇨🇦 CA | Right UpperSecondary Timing Chain Guide | View on Amazon |
| MELLING Fits: 3.6L V6 | BG5530 | 🇺🇸 US 🇨🇦 CA | UpperPrimary Timing Chain Guide | View on Amazon |
| MELLING Fits: 3.6L V6 | BG5534 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| MELLING Fits: 3.6L V6 | BG5531 | 🇺🇸 US 🇨🇦 CA | Left UpperSecondary Timing Chain Guide | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76063 | 🇺🇸 US 🇨🇦 CA | Right UpperSecondary Timing Chain Guide | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76061 | 🇺🇸 US 🇨🇦 CA | UpperPrimary Timing Chain Guide | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76054 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76179 | 🇺🇸 US 🇨🇦 CA | LowerPrimary Timing Chain Guide | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76055 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | R76062 | 🇺🇸 US 🇨🇦 CA | Left UpperSecondary Timing Chain Guide | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71041 | 🇺🇸 US 🇨🇦 CA | LowerPrimary | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71030 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71029 | 🇺🇸 US 🇨🇦 CA | UpperPrimary | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 91028 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmRight Secondary | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 91029 | 🇺🇸 US 🇨🇦 CA | Tensioner ArmLeft Secondary | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | 71031 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
36 Timing Chain Guide / Damper parts are listed for the 2008 Saturn Aura, from GM GENUINE, MELLING, CLOYES and 3 other brands. GM GENUINE 12623514 carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.6L V6 | BT5537 | 🇺🇸 US 🇨🇦 CA | New Mounting Bolts and Gasket Included | View on Amazon |
| S.A. GEAR Popular Fits: 3.6L V6 | 91030 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| S.A. GEAR Popular Fits: 3.6L V6 | 91031 | 🇺🇸 US 🇨🇦 CA | RightSecondary | View on Amazon |
| S.A. GEAR Popular Fits: 3.6L V6 | 91032 | 🇺🇸 US 🇨🇦 CA | LeftSecondary | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95536 | 🇺🇸 US 🇨🇦 CA | Right Upper | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95535 | 🇺🇸 US 🇨🇦 CA | Left Upper | View on Amazon |
| CLOYES Fits: 3.6L V6 | 95537 | 🇺🇸 US 🇨🇦 CA | Right Lower | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12609261 | 🇺🇸 US 🇨🇦 CA | LeftSECONDARY | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12609263 | 🇺🇸 US 🇨🇦 CA | CenterLESS BOLTS, Gasket | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12609259 | 🇺🇸 US 🇨🇦 CA | RightSECONDARY, LESS BOLTS AND GASKET | View on Amazon |
| INA Fits: 3.6L V6 | ZT01481 | 🇺🇸 US 🇨🇦 CA | Fits PRIMARY | View on Amazon |
| INA Fits: 3.6L V6 | ZT01491 | 🇺🇸 US 🇨🇦 CA | RightIdler to Cam (Adjuster)-Secondary Drive | View on Amazon |
| INA Fits: 3.6L V6 | ZT01501 | 🇺🇸 US 🇨🇦 CA | LeftIdler to Cam (Adjuster)-Secondary Drive | View on Amazon |
| INA Fits: 3.6L V6 | ZT95537 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| MELLING Fits: 3.6L V6 | BT5536 | 🇺🇸 US 🇨🇦 CA | New Mounting Bolts and Gasket Included | View on Amazon |
| MELLING Fits: 3.6L V6 | BT5535 | 🇺🇸 US 🇨🇦 CA | New Mounting Bolts and Gasket Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | T68002 | 🇺🇸 US 🇨🇦 CA | Right UpperSecondary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | T68001 | 🇺🇸 US 🇨🇦 CA | LowerPrimary | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | T68003 | 🇺🇸 US 🇨🇦 CA | Left UpperSecondary | View on Amazon |
| SKP Fits: 3.6L V6 | SK420129 | 🇺🇸 US 🇨🇦 CA | Includes Both Tensioners | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
20 Timing Chain Tensioner parts for the 2008 Saturn Aura come from 7 brands — INA, MELLING, S.A. GEAR and 4 other brands. The "Popular" part is MELLING BT5537.
Timing Chain Tensioner Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12589477 | 🇺🇸 US 🇨🇦 CA | PRIMARY | View on Amazon |
| ELRING Fits: 3.6L V6 | 037860 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| ELRING Fits: 3.6L V6 | 037870 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| ELRING Fits: 3.6L V6 | 037840 | 🇺🇸 US 🇨🇦 CA | Left Lower | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12589479 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the seals at the Timing Chain Tensioner Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Timing Chain Tensioner Gasket / Seal parts are listed for the 2008 Saturn Aura, from ELRING and GM GENUINE. GM GENUINE 12589477 carries the "Popular" badge.
Listed part numbers: GM GENUINE 12589477, ELRING 037860 and ELRING 037870, plus the other parts above.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | TCS46108 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | JV5178 | 🇺🇸 US 🇨🇦 CA | Contains Water Pump Gaskets, Timing Cover Gasket and SealSet | View on Amazon |
| APEX Fits: 3.6L V6 | ATC11640 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.6L V6 | 73190 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GM GENUINE Fits: 3.6L V6 | 12589478 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| SKP Fits: 3.6L V6 | SKTCS46108 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.6L V6 | 151024401 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
7 Timing Cover Gasket parts for the 2008 Saturn Aura come from 6 brands — FEL-PRO, MAHLE / CLEVITE, APEX and 3 other brands. The "Popular" part is FEL-PRO TCS46108.
This group includes FEL-PRO TCS46108, MAHLE / CLEVITE JV5178 and APEX ATC11640 and the remaining parts above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Popular Fits: 3.6L V6 | 19695A | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.6L V6 | 67828 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| SCHAEFFLER Fits: 3.6L V6 | SS6606 | 🇺🇸 US 🇨🇦 CA | 11 MM Width70.21 mm Outside Diameter | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 811017400 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.6L V6 | WS19695A | 🇺🇸 US 🇨🇦 CA | 1.969 Shaft Diameter0.433 Width | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Timing Cover Seal parts for the 2008 Saturn Aura come from 5 brands — SKF, MAHLE / CLEVITE, SCHAEFFLER and 2 other brands. The "Popular" part is SKF 19695A.
Listed part numbers: SKF 19695A, MAHLE / CLEVITE 67828 and SCHAEFFLER SS6606, plus the other parts above.
Timing Crank Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12645465 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 3.6L V6 | S921 | 🇺🇸 US 🇨🇦 CA | Replaces Sprocket Stamped 12599721with 30 Teeth | View on Amazon |
| CLOYES Fits: 3.6L V6 | S921 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| INA Fits: 3.6L V6 | ZSS921 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G56007 | 🇺🇸 US 🇨🇦 CA | 30 TeethReplaces Sprocket Stamped 12645465 | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1223 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the crankshaft sprockets that drive the timing chain or belt.
6 Timing Crank Sprocket parts for the 2008 Saturn Aura come from 6 brands — GM GENUINE, MELLING, CLOYES and 3 other brands. The "Popular" part is GM GENUINE 12645465.
Listed part numbers: GM GENUINE 12645465 and MELLING S921, plus the other parts above.
Timing Idler Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.6L V6 | S930 | 🇺🇸 US 🇨🇦 CA | Includes Mounting Bolt | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | S932 | 🇺🇸 US 🇨🇦 CA | Includes Mounting Bolt | View on Amazon |
| CLOYES Fits: 3.6L V6 | S930 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| CLOYES Fits: 3.6L V6 | S932 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| INA Fits: 3.6L V6 | ZSS930 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| INA Fits: 3.6L V6 | ZSS932 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G56008 | 🇺🇸 US 🇨🇦 CA | Mounting Bolt Included | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G56009 | 🇺🇸 US 🇨🇦 CA | Mounting Bolt Included | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1240 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1242 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the Timing Idler sprockets.
10 Timing Idler Sprocket parts are listed for the 2008 Saturn Aura, from MELLING, CLOYES, INA and 2 other brands. MELLING S930 carries the "Popular" badge.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 264930 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12641260 | 🇺🇸 US 🇨🇦 CA | Rightwithout Baffle | View on Amazon |
| AUTOTECNICA Fits: 3.6L V6 | GM1414697 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| AUTOTECNICA Fits: 3.6L V6 | GM1414317 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| DORMAN Fits: 3.6L V6 | 264925 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12647768 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| SKP Fits: 3.6L V6 | SK264925 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| SKP Fits: 3.6L V6 | SK264930 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| SKP Fits: 3.6L V6 | SK264930AL | 🇺🇸 US 🇨🇦 CA | Rightaluminum | View on Amazon |
This table covers the Valve covers.
9 Valve Cover parts are listed for the 2008 Saturn Aura, from SKP, DORMAN, GM GENUINE and 1 other brand. DORMAN 264930 carries the "Popular" badge.
This group includes DORMAN 264930, GM GENUINE 12641260 and AUTOTECNICA GM1414697 and the remaining parts above.
Valve Cover Bolt / Screw
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 11570020 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first.
One part is listed for the 2008 Saturn Aura — GM GENUINE 11570020.
Valve Cover Bolt Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12587285 | 🇺🇸 US 🇨🇦 CA | with BoltFor Aluminum CAM Cover Perimeter | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12595122 | 🇺🇸 US 🇨🇦 CA | Material: Silicone | View on Amazon |
This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
GM GENUINE supplies both parts for the 2008 Saturn Aura.
Part numbers include GM GENUINE 12587285 and GM GENUINE 12595122.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | VS50726R | 🇺🇸 US 🇨🇦 CA | Permadry RubberDoes Not Include Spark Plug Tube Seals | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.6L V6 | VS50501 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| APEX Fits: 3.6L V6 | AVC1164S | 🇺🇸 US 🇨🇦 CA | Includes Grommets | View on Amazon |
| ELRING Fits: 3.6L V6 | 942370 | 🇺🇸 US 🇨🇦 CA | for Plastic Cylinder Head CoverMaterial: Polyacrylate Rubber (ACM) | View on Amazon |
| ELRING Fits: 3.6L V6 | 942390 | 🇺🇸 US 🇨🇦 CA | for Plastic Cylinder Head CoverMaterial: Polyacrylate Rubber (ACM) | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12641261 | 🇺🇸 US 🇨🇦 CA | RightUse with Plastic CAM Cover | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12595106 | 🇺🇸 US 🇨🇦 CA | LeftUsed On Cover with Compression Limiter Bolt with Sleeve Under Bolt Installed | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12607401 | 🇺🇸 US 🇨🇦 CA | LeftUse with Plastic CAM Cover | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Valve Cover Gasket parts for the 2008 Saturn Aura come from 5 brands — GM GENUINE, ELRING, FEL-PRO and 2 other brands. The "Popular" part is FEL-PRO VS50726R.
This group includes FEL-PRO VS50726R, MAHLE / CLEVITE VS50501 and APEX AVC1164S and the remaining parts above.
Valve Cover Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12654651 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover washers.
One part is listed for the 2008 Saturn Aura — GM GENUINE 12654651.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.6L V6 | GD3112 | 🇺🇸 US | Iron | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 303112 | 🇺🇸 US 🇨🇦 CA | 1.655 OAL. 0.2355 I.D. 0.4358 O.D. | View on Amazon |
| SBI Fits: 3.6L V6 | 1403112 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2365 I.D. | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
3 Valve Guide parts for the 2008 Saturn Aura come from 3 brands — ENGINETECH, QUALCAST and SBI.
This group includes ENGINETECH GD3112, QUALCAST 303112 and SBI 1403112.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.6L V6 | L2319 | 🇺🇸 US | Hydraulic | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | JB7524 | 🇺🇸 US 🇨🇦 CA | Hydraulic | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | HL129 | 🇺🇸 US 🇨🇦 CA | Sold Individually | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 367082 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster | View on Amazon |
| SBI Fits: 3.6L V6 | VL175 | 🇺🇸 US 🇨🇦 CA | Hydraulic Lash Adjuster Type | View on Amazon |
| SEALED POWER Fits: 3.6L V6 | HT2307 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
6 Valve Lifter parts for the 2008 Saturn Aura come from 6 brands — ENGINETECH, MELLING, GM GENUINE and 3 other brands. The "Popular" part is ENGINETECH L2319.
Listed part numbers: ENGINETECH L2319, MELLING JB7524 and GM GENUINE HL129, plus the other parts above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12686721 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.6L V6 | ERV1588 | 🇺🇸 US | Conical | View on Amazon |
| MELLING Fits: 3.6L V6 | VS1588 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.6L V6 | 325001 | 🇺🇸 US 🇨🇦 CA | 1.729 Free Length. Conical | View on Amazon |
| SBI Fits: 3.6L V6 | 1601588 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust1.729 Length | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
5 Valve Spring parts are listed for the 2008 Saturn Aura, from GM GENUINE, ENGINETECH, MELLING and 2 other brands. GM GENUINE 12686721 carries the "Popular" badge.
Part numbers include GM GENUINE 12686721, ENGINETECH ERV1588 and MELLING VS1588, among others listed above.
Valve Spring Retainer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12575196 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | VSR713 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.6L V6 | 556735 | 🇺🇸 US | Intake and ExhaustChrome Moly. 0.735 O.D. 6mm Stem | View on Amazon |
This table covers the Valve Spring retainers.
3 Valve Spring Retainer parts are listed for the 2008 Saturn Aura, from GM GENUINE, MELLING and QUALCAST.
This group includes GM GENUINE 12575196, MELLING VSR713 and QUALCAST 556735.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Fits: 3.6L V6 | 12575197 | 🇺🇸 US 🇨🇦 CA | Material: Steel | View on Amazon |
| MELLING Fits: 3.6L V6 | VL1099 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| QUALCAST Fits: 3.6L V6 | 345032 | 🇺🇸 US 🇨🇦 CA | 1 Round Mid Bead. 0.235 Stem DIA. | View on Amazon |
| SBI Fits: 3.6L V6 | 1211127 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.1955 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
4 Valve Spring Retainer Keeper parts are listed for the 2008 Saturn Aura, from GM GENUINE, MELLING, QUALCAST and 1 other brand.
Part numbers include GM GENUINE 12575197, MELLING VL1099 and QUALCAST 345032, among others listed above.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.6L V6 | SS72923 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 19207664 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| APEX Fits: 3.6L V6 | AVS11064 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.6L V6 | SS45994 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| QUALCAST Fits: 3.6L V6 | 38603655 | 🇺🇸 US 🇨🇦 CA | Height (mm): 20.02Viton Top Hat. | View on Amazon |
| SBI Fits: 3.6L V6 | 1221418 | 🇺🇸 US 🇨🇦 CA | Intake and ExhaustViton Material | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | SS72923 | 🇺🇸 US 🇨🇦 CA | SetPremium Valve Stem Seals Included | View on Amazon |
| VICTOR REINZ Fits: 3.6L V6 | 121026301 | 🇺🇸 US 🇨🇦 CA | SetContains 24 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
8 Valve Stem Seal parts for the 2008 Saturn Aura come from 8 brands — FEL-PRO, GM GENUINE, APEX and 5 other brands. The "Popular" part is FEL-PRO SS72923.
Listed part numbers: FEL-PRO SS72923, GM GENUINE 19207664 and APEX AVS11064, plus the other parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ULTRA-POWER Popular Fits: 3.6L V6 | 917219 | 🇺🇸 US 🇨🇦 CA | EXHAUSTINTAKE | View on Amazon |
| DORMAN Fits: 3.6L V6 | 917219 | 🇺🇸 US 🇨🇦 CA | Fits Exhaustor Intake | View on Amazon |
| GATES Fits: 3.6L V6 | VVS185 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 3.6L V6 | 2VTS0052 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ROSTRA Fits: 3.6L V6 | 790004 | 🇺🇸 US 🇨🇦 CA | Fits Exhaustor Intake | View on Amazon |
| SKP Fits: 3.6L V6 | SK917219 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 3.6L V6 | VTS1011 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS Fits: 3.6L V6 | 5901021 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| WELLS Fits: 3.6L V6 | 2T1013 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12636175 | 🇺🇸 US 🇨🇦 CA | Activation Type: Electric | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | VCTS1004 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| S.A. GEAR Popular Fits: 3.6L V6 | S1427S | 🇺🇸 US 🇨🇦 CA | VVT Solenoid | View on Amazon |
| BECK/ARNLEY Fits: 3.6L V6 | 0241979 | 🇺🇸 US 🇨🇦 CA | Includes Oil Control Valve | View on Amazon |
| CLOYES Fits: 3.6L V6 | VTS108 | 🇺🇸 US 🇨🇦 CA | Variable Valve Timing (VVT) Solenoid | View on Amazon |
| NTK Fits: 3.6L V6 | VV0013 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PIERBURG Fits: 3.6L V6 | 706117040 | 🇺🇸 US 🇨🇦 CA | Control ValveElectric-Hydraulic | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | VVT190T | 🇺🇸 US 🇨🇦 CA | T-Series | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | VVT190 | 🇺🇸 US 🇨🇦 CA | Blue Streak | View on Amazon |
| VAICO Fits: 3.6L V6 | V401557 | 🇺🇸 US 🇨🇦 CA | Oil Control | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
19 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2008 Saturn Aura come from 18 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER, DORMAN and 15 other brands. The "Popular" part is ULTRA-POWER 917219.
The Economy section: 9 options from ULTRA-POWER, DORMAN, GATES and 6 other brands. ULTRA-POWER 917219 is listed in this group.
Standard Replacement: 10 parts, from STANDARD MOTOR PRODUCTS, GM GENUINE, MELLING and 6 other brands. A representative part number is GM GENUINE 12636175.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.6L V6 | 037710 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ELRING Fits: 3.6L V6 | 725940 | 🇺🇸 US 🇨🇦 CA | Material: ACM (Polyacrylate) | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12593717 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts are listed for the 2008 Saturn Aura, from ELRING and GM GENUINE.
This group includes ELRING 037710, ELRING 725940 and GM GENUINE 12593717.
Variable Valve Timing (VVT) Sprocket
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.6L V6 | 916946 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| DORMAN Fits: 3.6L V6 | 917274 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| DORMAN Fits: 3.6L V6 | 918187 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| ULTRA-POWER Fits: 3.6L V6 | VVT543 | 🇺🇸 US 🇨🇦 CA | LeftCam Gear | View on Amazon |
| WALKER PRODUCTS Fits: 3.6L V6 | 5951036 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GM GENUINE Popular Fits: 3.6L V6 | 12684831 | 🇺🇸 US 🇨🇦 CA | LeftUse with Wash 12632859 Unless Used On Saddle Cap Style Heads | View on Amazon |
| GM GENUINE Popular Fits: 3.6L V6 | 12684832 | 🇺🇸 US 🇨🇦 CA | Use with Wash 12632859 Unless Used On Saddle Cap Style HeadsEXH | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | VCTA1013H | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | VCTA1011H | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| MELLING Popular Fits: 3.6L V6 | VCTA1012H | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| CLOYES Fits: 3.6L V6 | VC108 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| CLOYES Fits: 3.6L V6 | VC109 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| CLOYES Fits: 3.6L V6 | VC110 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | ECP8211 | 🇺🇸 US | Intake (Left)One Per engine | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | ECP8212 | 🇺🇸 US | ExhaustTwo Per engine | View on Amazon |
| ENGINETECH Fits: 3.6L V6 | ECP8210 | 🇺🇸 US | Intake (Right)One Per engine | View on Amazon |
| GATES Fits: 3.6L V6 | VCP804 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| GATES Fits: 3.6L V6 | VCP805 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| GATES Fits: 3.6L V6 | VCP802 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| GM GENUINE Fits: 3.6L V6 | 12684830 | 🇺🇸 US 🇨🇦 CA | RightUse with Wash 12632859 Unless Used On Saddle Cap Style Heads | View on Amazon |
| INA Fits: 3.6L V6 | VV1150 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| INA Fits: 3.6L V6 | VV1152 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| INA Fits: 3.6L V6 | VVVC109 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G58212 | 🇺🇸 US 🇨🇦 CA | Exhaustwith OE # 12684832 | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G58210 | 🇺🇸 US 🇨🇦 CA | Intake (Right)with OE # 12684830 | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.6L V6 | G58211 | 🇺🇸 US 🇨🇦 CA | Intake (Left)with OE # 12684831 | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1425 | 🇺🇸 US 🇨🇦 CA | Intake (Right)Cam VVT | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1427 | 🇺🇸 US 🇨🇦 CA | ExhaustCam VVT | View on Amazon |
| S.A. GEAR Fits: 3.6L V6 | S1426 | 🇺🇸 US 🇨🇦 CA | Intake (Left)Cam VVT | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | VVT549 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.6L V6 | VVT543 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| WELLS Fits: 3.6L V6 | 3T1000 | 🇺🇸 US 🇨🇦 CA | Intake (Left) | View on Amazon |
| WELLS Fits: 3.6L V6 | 3T1003 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| WELLS Fits: 3.6L V6 | 3T1001 | 🇺🇸 US 🇨🇦 CA | Intake (Right) | View on Amazon |
This table covers the cam phaser sprockets used by the variable-valve-timing system.
34 Variable Valve Timing (VVT) Sprocket parts for the 2008 Saturn Aura come from 13 brands — DORMAN, GM GENUINE, MELLING and 10 other brands. The "Popular" part is DORMAN 916946. They are grouped as Economy and Standard Replacement, with Standard Replacement the largest group at 29 parts from GM GENUINE, MELLING, CLOYES and 7 other brands.
Variable Valve Timing (VVT) Sprocket Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.6L V6 | VCB108 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 3.6L V6 | VCB108 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Fits: 3.6L V6 | VCTB1013 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Variable Valve Timing (VVT) Sprocket bolts.
3 Variable Valve Timing (VVT) Sprocket Bolt parts are listed for the 2008 Saturn Aura, from CLOYES, FVP and MELLING.
Listed part numbers: CLOYES VCB108 and MELLING VCTB1013, plus the other parts above.
Buying Engine Parts for a 2008 Saturn Aura
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Timing Chain Guide / Damper and Variable Valve Timing (VVT) Sprocket .
Frequently Asked Questions
How many engine parts fit the 2008 Saturn Aura?
Our catalog currently lists 514 engine parts for the 2008 Saturn Aura across 90 subcategories and 70 brands, covering all 4 engine options (2.4L L4, 2.4L L4 ELECTRIC/GAS, 3.5L V6 and 3.6L V6). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2008 Saturn Aura engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2008 Saturn Aura?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2008 Saturn Aura?
Oil rows on this page include SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2008 Saturn Aura was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2008 Saturn Aura?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2008 Saturn Aura
Engine Parts for Other Saturn Aura Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.