2014 SRT Viper Engine Parts

This table covers the camshafts that open the valves. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037698AB.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Connecting Rod Bearing parts are listed for the 2014 SRT Viper, from MAHLE / CLEVITE and KING ENGINE BEARINGS. MAHLE / CLEVITE CB1808A carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS and MAHLE / CLEVITE supply 4 parts: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section lists 5 options from MAHLE / CLEVITE and KING ENGINE BEARINGS — built to original-equipment specification. MAHLE / CLEVITE CB1808A is listed in this group.

This group includes MAHLE / CLEVITE CB1808A, KING ENGINE BEARINGS CR8032XPN and KING ENGINE BEARINGS CR8032XPNX and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6508955AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2014 SRT Viper — MOPAR 68026796AA.

This table covers the crankshafts that turn piston motion into rotation. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037695AB.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Crankshaft Main Bearing parts for the 2014 SRT Viper come from 2 brands — MAHLE / CLEVITE and MOPAR.

The High Performance section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE MS2253H is listed in this group.

Standard Replacement: 1 part, from MOPAR. A representative part number is MOPAR 4723538AD.

Listed part numbers: MAHLE / CLEVITE MS2253H, MAHLE / CLEVITE MS2253HX and MOPAR 4723538AD.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

2 Crankshaft Repair Sleeve parts for the 2014 SRT Viper come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 99199 and WJB / INMOTION PARTS WS99199.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Crankshaft Seal parts for the 2014 SRT Viper come from 5 brands — NATIONAL, APEX, FEL-PRO and 2 other brands. The "Popular" part is NATIONAL 471424V.

Part numbers include NATIONAL 471424V, APEX ABS295 and FEL-PRO BS40688, among others listed above.

This table covers the cylinder heads that close the top of the block. Read more

This group shows a single part: MOPAR 5037711AG.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

MOPAR supplies both parts for the 2014 SRT Viper.

Part numbers include MOPAR 5045440AA and MOPAR 5045441AA.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

One part is listed for the 2014 SRT Viper — MOPAR 68206122AA.

This table covers the Engine covers. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5290136AF.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2014 SRT Viper.

This group includes MOPAR 68060349AA and MOPAR 6036543AA.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts for the 2014 SRT Viper come from MOPAR.

This group includes MOPAR 5038554AE and MOPAR 5038554AF.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5038094AA.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: MOPAR 5037718AA.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: MOPAR 5038658AA.

This table covers the Motor Mount Heat insulators. Read more

MOPAR supplies both parts for the 2014 SRT Viper.

This group includes MOPAR 5038680AA and MOPAR 5038681AA.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts for the 2014 SRT Viper come from 2 brands — VALVOLINE and LIQUI MOLY. The "Popular" part is LIQUI MOLY 2050.

Listed part numbers: LIQUI MOLY 2050, VALVOLINE VV966 and LIQUI MOLY 2049, plus the other parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

This group shows a single part: MOPAR 5290014AE.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2014 SRT Viper come from MOPAR.

This group includes MOPAR 5037851AB and MOPAR 5037852AB.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts for the 2014 SRT Viper come from 4 brands — DORMAN, AGS, MOPAR and 1 other brand. The "Popular" part is AGS ODP00007.

This group includes AGS ODP00007, DORMAN 090053 and DORMAN 090115 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 SRT Viper — FEL-PRO 70822.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2014 SRT Viper come from 4 brands — CALORSTAT, MOPAR, MOTORAD and 1 other brand.

Listed part numbers: CALORSTAT OC2317, MOPAR 5037665AC and MOTORAD MO111, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

12 Oil Filter parts for the 2014 SRT Viper come from 9 brands — BOSCH, VARIOUS MFR, MOTORCRAFT and 6 other brands. The "Popular" part is MOBIL M1210A.

The Economy section lists 3 options from BOSCH, CHAMP / LUBER-FINER and VARIOUS MFR — the catalog's value-priced group. BOSCH 72227WS is listed in this group.

The High Performance / Heavy Duty section lists 1 option from MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1210A is listed in this group.

Standard Replacement: 8 parts, from MOTORCRAFT, BOSCH, DENSO and 4 other brands. A representative part number is BOSCH 3410.

This table covers the oil pans that hold the engine's oil sump. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037735AE.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5037163AD.

This table covers the Oil Pump covers. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037942AB.

This table covers the pickup tubes and screens that feed the oil pump. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5038022AB.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MOPAR 53020861.

This table covers the rings that seal each piston to the cylinder wall. Read more

One part is listed for the 2014 SRT Viper — MOPAR 68202596AB.

This table covers the timing chains that keep the cams in time with the crank. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037059AA.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

This group shows a single part: MOPAR 68026797AA.

This table covers the Timing covers. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5037708AC.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Timing Cover Gasket parts for the 2014 SRT Viper come from 2 brands — APEX and FEL-PRO.

Listed part numbers: APEX ATC2950 and FEL-PRO TCS46057.

This table covers the Valve covers. Read more

MOPAR supplies both parts for the 2014 SRT Viper.

This group includes MOPAR 5038578AE and MOPAR 5038579AF.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MOPAR 5037827AA.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: MOPAR 5037812AA.

This table covers the guides that keep each lifter aligned. Read more

This group shows a single part: MOPAR 5037807AA.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2014 SRT Viper — MOPAR 5038762AA.

This table covers the Valve Spring retainers. Read more

3 Valve Spring Retainer parts are listed for the 2014 SRT Viper, from MELLING and MOPAR.

Part numbers include MELLING VSR711, MELLING 4752516 and MOPAR 53021676AB.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Valve Stem Seal parts for the 2014 SRT Viper come from 3 brands — APEX, FEL-PRO and MOPAR.

This group includes APEX AVS2095, FEL-PRO SS72860 and MOPAR 5037847AA.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2014 SRT Viper come from 5 brands — DORMAN, GATES, WELLS and 2 other brands. The "Popular" part is DORMAN 916718.

The Economy section: 3 options from DORMAN, GATES and WELLS. DORMAN 916718 is listed in this group.

Standard Replacement: 2 parts, from STANDARD MOTOR PRODUCTS and VAICO. A representative part number is STANDARD MOTOR PRODUCTS VVT285.

Listed part numbers: DORMAN 916718, GATES VVS297 and WELLS 2T1187, plus the other parts above.