2013 Toyota Avanza Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Camshaft Seal parts are listed for the 2013 Toyota Avanza, from ELRING and VICTOR REINZ.

Part numbers include ELRING 010360 and VICTOR REINZ 815324700.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54182400.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2013 Toyota Avanza, from ELRING and AJUSA. AJUSA 15012800 carries the "Popular" badge.

This group includes AJUSA 15012800, ELRING 010360 and AJUSA 15062900 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

Part numbers include AJUSA 81027300 and ELRING 022670.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Cylinder Head Gasket parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 10199500 and ELRING 197920.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 52347700 and ELRING 200930.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 50318500 and ELRING 197980.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 13243100 and ELRING 197960.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

VALVOLINE supplies the 6 Oil parts for the 2013 Toyota Avanza. VALVOLINE VV916 carries the "Popular" badge.

In the Full Synthetic grade, VALVOLINE supplies 2 parts: full-synthetic oils. A representative part number is VALVOLINE VV916.

The High Mileage (>75,000 Miles) section lists 4 options from VALVOLINE — oils grouped for high-mileage engines. VALVOLINE 833002 is listed in this group.

This group includes VALVOLINE VV916, VALVOLINE 881150 and VALVOLINE 833002 and the remaining parts above.

This table covers the drain plugs in the oil pan. Read more

ELRING supplies both parts for the 2013 Toyota Avanza.

This group includes ELRING 587290 and ELRING 952850.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2013 Toyota Avanza come from 2 brands — AJUSA and ELRING.

Listed part numbers: AJUSA 22018400 and ELRING 473500.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2013 Toyota Avanza — MOTORAD MO155.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

10 Oil Filter parts are listed for the 2013 Toyota Avanza, from VARIOUS MFR, WIX, FVP and 4 other brands. ACDELCO PF1233 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR, FVP and PRO-TEC supply 4 parts: the catalog's value-priced group. A representative part number is FVP R1394.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1103A.

The Standard Replacement section lists 4 options from ACDELCO, WIX, MANN and 1 other brand — built to original-equipment specification. ACDELCO PF1233 is listed in this group.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: HASTINGS MANUFACTURING 2N5266.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 2013 Toyota Avanza — SKF 99139.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2013 Toyota Avanza — SKF 13857.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Valve Cover Gasket parts are listed for the 2013 Toyota Avanza, from ELRING and AJUSA.

Part numbers include AJUSA 56025000, ELRING 182130 and ELRING 389280.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 2013 Toyota Avanza, from AJUSA and ELRING.

This group includes AJUSA 12031000, AJUSA 57065300 and ELRING 472230 and the remaining parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2013 Toyota Avanza — ACKOJA A701080.