2013 Toyota Corolla Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Camshaft Seal parts for the 2013 Toyota Corolla come from 2 brands — ELRING and VICTOR REINZ. 1 part fits every engine; the other 3 are engine-specific.

Listed part numbers: ELRING 586668, ELRING 135140 and ELRING 848350, plus the other parts above.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts are listed for the 2013 Toyota Corolla, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 2 other brands.

Part numbers include ENGINETECH BB1059, ITM ENGINE COMPONENTS 4B1702 and KING ENGINE BEARINGS CR4514SI, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Conversion / Lower Gasket Set parts are listed for the 2013 Toyota Corolla, from ELRING, APEX, ENGINETECH and 3 other brands. APEX ACS8081 carries the "Popular" badge.

Part numbers include APEX ACS8081, ENGINETECH TO18CSD and AJUSA 54183100, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts for the 2013 Toyota Corolla come from 5 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BC1048.

This group includes ENGINETECH BC1048, ITM ENGINE COMPONENTS 5M1704 and KING ENGINE BEARINGS MB5646SI and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2013 Toyota Corolla come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand. 1 part fits every engine; the other 3 are engine-specific.

Part numbers include BCA NS99147, NATIONAL 99147 and SCHAEFFLER SR3476, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts for the 2013 Toyota Corolla come from 9 brands — ELRING, VICTOR REINZ, AJUSA and 6 other brands. The "Popular" part is AJUSA 15015300. 3 parts fit every engine; the other 19 are engine-specific.

This table covers the cylinder heads that close the top of the block. Read more

2 Cylinder Head parts for the 2013 Toyota Corolla come from CYLINDER HEAD EXPRESS.

Part numbers include CYLINDER HEAD EXPRESS CI1209B and CYLINDER HEAD EXPRESS CI1209L.

This table covers the bolts that clamp the cylinder head to the block. Read more

13 Cylinder Head Bolt parts are listed for the 2013 Toyota Corolla, from ELRING, ENGINETECH, FEL-PRO and 8 other brands. ENGINETECH HB298 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts are listed for the 2013 Toyota Corolla, from ENGINETECH, ELRING, AJUSA and 5 other brands. APEX AHG881 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 2013 Toyota Corolla, from ELRING, FEL-PRO, AJUSA and 6 other brands. APEX AHS8081 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

3 Engine Block Heater parts for the 2013 Toyota Corolla come from KAT'S HEATERS.

Listed part numbers: KAT'S HEATERS 11411, KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

7 Engine Cover parts are listed for the 2013 Toyota Corolla, from TECHPRO and VARIOUS MFR. TECHPRO TO1228151 carries the "Popular" badge. All of them fit every engine offered in the 2013 Corolla.

This group includes TECHPRO TO1228151, TECHPRO TO1228148 and TECHPRO TO1228152 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

10 Engine Kit Gasket Set parts are listed for the 2013 Toyota Corolla, from AJUSA, ELRING, VICTOR REINZ and 4 other brands. ITM ENGINE COMPONENTS 0901508 carries the "Popular" badge.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts for the 2013 Toyota Corolla come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3366.

This group includes MELLING V3366, ENGINETECH EM4473 and QUALCAST 1013366 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

9 Harmonic Balancer parts are listed for the 2013 Toyota Corolla, from SKP, ATP, PIONEER and 3 other brands. SKP SK594404 carries the "Popular" badge.

In the Economy grade, SKP supplies 2 parts: the catalog's value-priced group. A representative part number is SKP SK594404.

The Standard Replacement section lists 6 options from ATP, PIONEER, ULTRA-POWER and 1 other brand — built to original-equipment specification. ULTRA-POWER 594404 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

Listed part numbers: SKP SK594404, SKP SK594198 and ULTRA-POWER 594404, plus the other parts above.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: ACKOJA A700294.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2013 Toyota Corolla, from ELRING, FEL-PRO, MAHLE / CLEVITE and 3 other brands. FEL-PRO MS97144 carries the "Popular" badge.

Part numbers include FEL-PRO MS97144, MAHLE / CLEVITE MS19723 and APEX AMS8810, among others listed above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 299150.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts for the 2013 Toyota Corolla come from 5 brands — MELLING, ENGINETECH, QUALCAST and 2 other brands. The "Popular" part is MELLING V3365.

This group includes MELLING V3365, ENGINETECH IM4472 and QUALCAST 1013365 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

25 Motor Mount parts for the 2013 Toyota Corolla come from 6 brands — ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 3 other brands. The "Popular" part is SKP SKM9391.

The Economy section: 3 options from SKP. SKP SKM9391 is listed in this group.

Standard Replacement: 14 parts, from ANCHOR, BECK/ARNLEY, DEA / MARMON RIDE CONTROL and 2 other brands. A representative part number is ANCHOR 9391.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2013 Toyota Corolla come from ANCHOR.

This group includes ANCHOR 300685 and ANCHOR 300679.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

29 Oil parts for the 2013 Toyota Corolla come from 5 brands — VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, PENTOSIN and 2 other brands.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2013 Toyota Corolla.

Listed part numbers: HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

2 Oil Dipstick / Tube parts for the 2013 Toyota Corolla come from DORMAN.

This group includes DORMAN 917392 and DORMAN 917399.

This table covers the drain plugs in the oil pan. Read more

7 Oil Drain Plug parts for the 2013 Toyota Corolla come from 5 brands — DORMAN, ELRING, AGS and 2 other brands. The "Popular" part is DORMAN 090038. 6 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: DORMAN 090038, DORMAN 090049 and AGS ODP00011, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Oil Drain Plug Gasket parts are listed for the 2013 Toyota Corolla, from DORMAN, MAHLE / CLEVITE, APEX and 5 other brands. DORMAN 095156 carries the "Popular" badge. 2 parts fit every engine; the other 6 are engine-specific.

Listed part numbers: DORMAN 095156, MAHLE / CLEVITE 2051 and APEX ADP1902, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

6 Oil Filler Cap parts for the 2013 Toyota Corolla come from 5 brands — MOTORAD, DORMAN, CALORSTAT and 2 other brands. The "Popular" part is DORMAN 84111. 2 parts fit every engine; the other 4 are engine-specific.

Part numbers include DORMAN 84111, CALORSTAT OC2312 and GATES 31285, among others listed above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Toyota Corolla — AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

30 Oil Filter parts for the 2013 Toyota Corolla come from 17 brands — VARIOUS MFR, FRAM, WIX and 14 other brands. The "Popular" part is CHAMP / LUBER-FINER P980. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Standard Replacement the largest group at 17 parts from WIX, ACDELCO, FRAM and 10 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2013 Toyota Corolla, from FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO ES71858 and MAHLE / CLEVITE B33713.