2014 Toyota Sequoia Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Connector parts for the 2014 Toyota Sequoia come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S2541 and STANDARD MOTOR PRODUCTS S2539.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Refrigerant Pressure Switch Connector parts are listed for the 2014 Toyota Sequoia, from GPD and STANDARD MOTOR PRODUCTS.

This group includes GPD 1711993 and STANDARD MOTOR PRODUCTS S1028.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

15 ABS Wheel Speed Sensor Connector parts for the 2014 Toyota Sequoia come from 3 brands — STANDARD MOTOR PRODUCTS, HOLSTEIN and WELLS. The "Popular" part is STANDARD MOTOR PRODUCTS S2825.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2815.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2548.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ambient Air Temperature Sensor Connector parts for the 2014 Toyota Sequoia come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S986 and WELLS 1P2653.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Blower Motor Connector parts for the 2014 Toyota Sequoia come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S3204 and STANDARD MOTOR PRODUCTS S3208.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S3142.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Camshaft Position Sensor Connector parts for the 2014 Toyota Sequoia come from 2 brands — DORMAN and STANDARD MOTOR PRODUCTS.

This group includes DORMAN 645744 and STANDARD MOTOR PRODUCTS S2837.

This table covers the harness connectors at the Cruise Control Distance Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S1712.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1032.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2825.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2873.

This table covers the harness connectors at the Headlamp Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S2837.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Ignition Coil Connector parts for the 2014 Toyota Sequoia come from 4 brands — STANDARD MOTOR PRODUCTS, FVP, UNITED MOTOR PRODUCTS and 1 other brand. The "Popular" part is STANDARD MOTOR PRODUCTS S2527.

This group includes STANDARD MOTOR PRODUCTS S2527, FVP UF487F and STANDARD MOTOR PRODUCTS S3291 and the remaining parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Knock / Detonation Sensor Connector parts for the 2014 Toyota Sequoia come from 3 brands — STANDARD MOTOR PRODUCTS, DORMAN and WELLS.

Part numbers include DORMAN 926770, STANDARD MOTOR PRODUCTS S2328 and STANDARD MOTOR PRODUCTS S2918, among others listed above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S1712.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S2538.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2014 Toyota Sequoia come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S3116 and STANDARD MOTOR PRODUCTS S1804.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2537.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies the 7 Radio Connector parts for the 2014 Toyota Sequoia. METRA 701761 carries the "Popular" badge.

Part numbers include METRA 701761, METRA 711761 and METRA AXSWCHT28, among others listed above.

This table covers the Repair harnesses. Read more

This group shows a single part: ROSTRA 3500169.

This table covers the harness connectors at the Speaker Amplifier. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: METRA AXABHTY4.

This table covers the harness connectors at the Speaker. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — METRA 728104.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Speed Sensor Connector parts are listed for the 2014 Toyota Sequoia, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2549.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Temperature Sender / Sensor Connector parts for the 2014 Toyota Sequoia come from 5 brands — WELLS, FOUR SEASONS, ROSTRA and 2 other brands. The "Popular" part is WELLS 1P1562.

Part numbers include WELLS 1P1562, FOUR SEASONS 37288 and ROSTRA 610189, among others listed above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2817.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 57101.

This table covers the harness connectors at the Trailer Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 51362.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

14 Trailer Connector parts are listed for the 2014 Toyota Sequoia, from CURT, STANDARD MOTOR PRODUCTS and WELLS. CURT 55415 carries the "Popular" badge.

This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: CURT 56475.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2014 Toyota Sequoia — STANDARD MOTOR PRODUCTS S3169.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Vapor Canister Purge Valve / Solenoid Connector parts for the 2014 Toyota Sequoia come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS S1530, UNITED MOTOR PRODUCTS CON26 and WELLS 1P1876.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2846.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Variable Valve Timing (VVT) Solenoid Connector parts for the 2014 Toyota Sequoia come from 3 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1716, WALKER PRODUCTS 2701102 and WELLS 1P1680.

This table covers the harness connectors at the Washer Fluid Level Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3320.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1423.