2014 Toyota Tundra Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Connecting Rod Bearing parts for the 2014 Toyota Tundra come from 2 brands — MAHLE / CLEVITE and SEALED POWER.

This group includes MAHLE / CLEVITE CB1986A8 and SEALED POWER 86055P.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Conversion / Lower Gasket Set parts for the 2014 Toyota Tundra come from 6 brands — APEX, ENGINETECH, AJUSA and 3 other brands. The "Popular" part is APEX ACS8079.

This group includes APEX ACS8079, ENGINETECH TO57CSA and AJUSA 54240200 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2014 Toyota Tundra, from TOPLINE, ENGINETECH, MAHLE / CLEVITE and 1 other brand. ENGINETECH BC1028 carries the "Popular" badge.

Part numbers include ENGINETECH BC1028, MAHLE / CLEVITE MS2365A and SEALED POWER 7469M, among others listed above.

This table covers the gaskets that seal the Crankshaft Main Bearing. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ULTRA-POWER BS40679.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts are listed for the 2014 Toyota Tundra, from WJB / INMOTION PARTS, NATIONAL, SKF and 2 other brands. SKF 99369 carries the "Popular" badge.

Listed part numbers: SKF 99369, WJB / INMOTION PARTS WS99166 and BCA NS99166, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

18 Crankshaft Seal parts are listed for the 2014 Toyota Tundra, from VICTOR REINZ, AJUSA, FEL-PRO and 8 other brands. AJUSA 15019600 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts for the 2014 Toyota Tundra come from 7 brands — AJUSA, MAHLE / CLEVITE, APEX and 4 other brands. The "Popular" part is AJUSA 81042100.

Listed part numbers: AJUSA 81042100, MAHLE / CLEVITE GS33754 and APEX AHB879, plus the other parts above.

This table covers the Cylinder Head Bolt washers. Read more

This group shows a single part: MAHLE / CLEVITE GS33354.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

14 Cylinder Head Gasket parts for the 2014 Toyota Tundra come from 7 brands — ENGINETECH, FEL-PRO, AJUSA and 4 other brands. The "Popular" part is ENGINETECH HTO57LA.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 2014 Toyota Tundra come from 4 brands — ENGINETECH, FEL-PRO, AJUSA and 1 other brand. The "Popular" part is ENGINETECH TO57HSA.

This group includes ENGINETECH TO57HSA, ENGINETECH TO57HSAWB and AJUSA 52457700 and the remaining parts above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2014 Toyota Tundra.

This group includes KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO TO1228243.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2014 Toyota Tundra come from 2 brands — AJUSA and ENGINETECH.

Part numbers include AJUSA 50417400 and ENGINETECH TO57K1.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2014 Toyota Tundra, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V3087 carries the "Popular" badge.

Part numbers include MELLING V3087, ENGINETECH EM4457 and QUALCAST 1013087, among others listed above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2014 Toyota Tundra come from 5 brands — SKP, ATP, DAYCO and 2 other brands. The "Popular" part is SKP SK594703.

The Economy section lists 1 option from SKP — the catalog's value-priced group. SKP SK594703 is listed in this group.

In the Standard Replacement grade, ATP, DAYCO and ULTRA-POWER supply 3 parts: built to original-equipment specification. A representative part number is ATP 102416.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include SKP SK594703, ATP 102416 and DAYCO PB1650N, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2014 Toyota Tundra come from 4 brands — AJUSA, MAHLE / CLEVITE, APEX and 1 other brand. The "Popular" part is MAHLE / CLEVITE MS19736.

This group includes MAHLE / CLEVITE MS19736, AJUSA 13254700 and AJUSA 13278200 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2014 Toyota Tundra — ELRING 996490.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2014 Toyota Tundra, from MELLING, ENGINETECH, QUALCAST and 2 other brands. MELLING V3086 carries the "Popular" badge.

Part numbers include MELLING V3086, ENGINETECH IM4456 and QUALCAST 1013086, among others listed above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2014 Toyota Tundra, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand. ANCHOR 9693 carries the "Popular" badge.

Part numbers include ANCHOR 9693, ANCHOR 9692 and DEA / MARMON RIDE CONTROL A4267, among others listed above.

This table covers the Motor Mount kits. Read more

3 Motor Mount Kit parts are listed for the 2014 Toyota Tundra, from ANCHOR and WESTAR.

Part numbers include ANCHOR 300150, ANCHOR 300149 and WESTAR ETK087.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts are listed for the 2014 Toyota Tundra, from VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. LIQUI MOLY 2208 carries the "Popular" badge. Full Synthetic and High Mileage (>75,000 Miles) are all represented, and Full Synthetic alone accounts for 23 parts.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

3 Oil Cooler parts are listed for the 2014 Toyota Tundra, from ACKOJA and NISSENS.

Listed part numbers: ACKOJA A70600025, ACKOJA A70600019 and NISSENS 91443.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE GS33926.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 2014 Toyota Tundra, from DORMAN, BECK/ARNLEY, JAPANESE OE and 1 other brand. DORMAN 090038 carries the "Popular" badge.

Part numbers include DORMAN 090038, DORMAN 090049 and BECK/ARNLEY 0160116, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts for the 2014 Toyota Tundra come from 5 brands — DORMAN, APEX, FEL-PRO and 2 other brands. The "Popular" part is DORMAN 095156.

This group includes DORMAN 095156, APEX ADP1902 and FEL-PRO 70822 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

5 Oil Filler Cap parts are listed for the 2014 Toyota Tundra, from DORMAN, CALORSTAT, GATES and 2 other brands. DORMAN 84111 carries the "Popular" badge.

Listed part numbers: DORMAN 84111, CALORSTAT OC2312 and GATES 31285, plus the other parts above.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

22 Oil Filter parts are listed for the 2014 Toyota Tundra, from CHAMP / LUBER-FINER, FVP, VARIOUS MFR and 14 other brands. MOBIL M1C453A carries the "Popular" badge.

Economy: 7 parts, from CHAMP / LUBER-FINER, FRAM, FVP and 4 other brands. A representative part number is CHAMP / LUBER-FINER P979.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C453A.

The Standard Replacement section: 13 options from HASTINGS / BALDWIN, ACDELCO, BOSCH and 9 other brands. ACDELCO PF466G is listed in this group.

This table covers the Oil Filter covers. Read more

6 Oil Filter Cover parts for the 2014 Toyota Tundra come from 5 brands — MOTORAD, DORMAN, SKP and 2 other brands. The "Popular" part is DORMAN 917016.

Part numbers include DORMAN 917016, SKP SK917016 and AUTOTECNICA TY1420831, among others listed above.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2014 Toyota Tundra come from 5 brands — AUTOTECNICA, ACKOJA, DORMAN and 2 other brands. The "Popular" part is AUTOTECNICA TY1416310.

Part numbers include AUTOTECNICA TY1416310, ACKOJA A700436 and DORMAN 264475, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 2014 Toyota Tundra, from APEX, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Part numbers include APEX AOP879, FEL-PRO OS30803 and MAHLE / CLEVITE OS32372, among others listed above.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2014 Toyota Tundra — FEL-PRO 73595.

This table covers the Oil Pump repair kits. Read more

This group shows a single part: MELLING K544.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

This group shows a single part: SEALED POWER 13635CPA.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2014 Toyota Tundra — TOPLINE PBD34.

This table covers the rings that seal each piston to the cylinder wall. Read more

4 Piston Ring parts for the 2014 Toyota Tundra come from 3 brands — HASTINGS MANUFACTURING, SEALED POWER and TOPLINE.

In the Premium grade, SEALED POWER supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is SEALED POWER E1002KC.

Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and TOPLINE. A representative part number is HASTINGS MANUFACTURING 2C4586.

This group includes SEALED POWER E1002KC, HASTINGS MANUFACTURING 2C4586 and HASTINGS MANUFACTURING 2C4586S and the remaining parts above.

This table covers the rocker arms that transfer cam motion to the valves. Read more

2 Rocker Arm parts are listed for the 2014 Toyota Tundra, from ENGINETECH and MELLING.

This group includes ENGINETECH ER0104 and MELLING MR906.

This table covers the Thrust washers. Read more

4 Thrust Washer parts are listed for the 2014 Toyota Tundra, from ENGINETECH, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 1 other brand.

This group includes ENGINETECH TW1028, ITM ENGINE COMPONENTS 2T1046 and MAHLE / CLEVITE TW728S and the remaining parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

9 Timing Chain parts for the 2014 Toyota Tundra come from 5 brands — MELLING, S.A. GEAR, CLOYES and 2 other brands. The "Popular" part is MELLING 1026.

This group includes MELLING 1026, S.A. GEAR C1026 and AISIN ETCT007 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2014 Toyota Tundra, from PREFERRED COMPONENTS INC, S.A. GEAR, CLOYES and 2 other brands. CLOYES 90987SAX carries the "Popular" badge.

Economy: 4 parts, from PREFERRED COMPONENTS INC and S.A. GEAR. A representative part number is PREFERRED COMPONENTS INC TS22814.

The Standard Replacement section: 5 options from CLOYES, MELLING and INA. CLOYES 90987SAX is listed in this group.

Listed part numbers: CLOYES 90987SAX, PREFERRED COMPONENTS INC TS22814 and PREFERRED COMPONENTS INC TS12814, plus the other parts above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

16 Timing Chain Guide / Damper parts for the 2014 Toyota Tundra come from 4 brands — MELLING, CLOYES, PREFERRED COMPONENTS INC and 1 other brand. The "Popular" part is MELLING BT7060.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

16 Timing Chain Tensioner parts are listed for the 2014 Toyota Tundra, from MELLING, CLOYES, PREFERRED COMPONENTS INC and 1 other brand. MELLING BT5099 carries the "Popular" badge.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2014 Toyota Tundra, from MAHLE / CLEVITE and SCHAEFFLER.

Listed part numbers: MAHLE / CLEVITE 67860 and SCHAEFFLER SS3750.