2018 Toyota Corolla Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S1530.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1028.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

11 ABS Wheel Speed Sensor Connector parts are listed for the 2018 Toyota Corolla, from STANDARD MOTOR PRODUCTS, HOLSTEIN, BECK/ARNLEY and 2 other brands. HOLSTEIN 2ABS2487 carries the "Popular" badge.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2815.

This table covers the harness connectors at the Ambient Air Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S986.

This table covers the harness connectors at the Back Up / Reverse Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3139.

This table covers the harness connectors at the Battery Current Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2818.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S3208.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Blower Motor Control Module / Resistor Connector parts for the 2018 Toyota Corolla come from 2 brands — HOLSTEIN and STANDARD MOTOR PRODUCTS.

Part numbers include HOLSTEIN 2HAR0048 and STANDARD MOTOR PRODUCTS S2117.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3142.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Camshaft Position Sensor Connector parts are listed for the 2018 Toyota Corolla, from DORMAN and STANDARD MOTOR PRODUCTS.

Listed part numbers: DORMAN 645744 and STANDARD MOTOR PRODUCTS S2837.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2808.

This table covers the harness connectors at the Cruise Control Distance Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2818.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fuel Injector Connector parts are listed for the 2018 Toyota Corolla, from GB REMANUFACTURING and STANDARD MOTOR PRODUCTS.

Part numbers include GB REMANUFACTURING 5188 and STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the Fuel Pump / Circuit Opening Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P4004.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2873.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts are listed for the 2018 Toyota Corolla, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WALKER PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S3291, STANDARD MOTOR PRODUCTS S2527 and UNITED MOTOR PRODUCTS CON208, plus the other parts above.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2328.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Manifold Pressure (MAP) Sensor Connector parts are listed for the 2018 Toyota Corolla, from STANDARD MOTOR PRODUCTS, ULTRA-POWER and WALKER PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1028 and ULTRA-POWER 2701088 and the remaining parts above.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1712.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2538.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S1804.

This table covers the harness connectors at the Park Assist (PAS) Camera. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Park Assist (PAS) Camera Connector parts for the 2018 Toyota Corolla come from 2 brands — METRA and STANDARD MOTOR PRODUCTS.

Part numbers include METRA AXDSPXTY3 and STANDARD MOTOR PRODUCTS S3297.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2537.

This table covers the harness connectors at the Radiator Fan Resistor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S3314.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: METRA AXSWCHT28.

This table covers the harness connectors at the Side Marker Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1530.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Speed Sensor Connector parts for the 2018 Toyota Corolla come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1530 and UNITED MOTOR PRODUCTS CON26.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2549.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts are listed for the 2018 Toyota Corolla, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1923 and UNITED MOTOR PRODUCTS CON57.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2817.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Connector parts for the 2018 Toyota Corolla come from 2 brands — CURT and TEKONSHA.

Listed part numbers: CURT 55567 and TEKONSHA 118405.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Turn Signal Switch Connector parts for the 2018 Toyota Corolla come from STANDARD MOTOR PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S3169 and STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Vapor Canister Purge Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S1530.

This table covers the harness connectors at the Vapor Leak Detection Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S2818.

This table covers the harness connectors at the Variable Valve Timing (VVT) Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Variable Valve Timing (VVT) Solenoid Connector parts are listed for the 2018 Toyota Corolla, from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S1716 and WALKER PRODUCTS 2701102.

This table covers the harness connectors at the Washer Pump. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S3083.

This table covers the harness connectors at the Wiper Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2018 Toyota Corolla — STANDARD MOTOR PRODUCTS S1423.