2018 Toyota Hilux Engine Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

The 2018 Toyota Hilux has 90 engine parts with verified fitment on this page — 24 part types and 17 brands, covering both the 2.7L L4 and the 2.8L L4 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.

On the 2018 Toyota Hilux, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 21 parts of the 90 listed are Valve Stem Seal (8 parts), Crankshaft Seal (7 parts) and Cylinder Head Gasket (6 parts). The other 21 part types cover the remaining 69 parts.

Balance Shaft Chain

Brand Part Number Markets Notes Buy
MELLING Fits: 2.7L L4 8MMSRH82
🇲🇽 MX
View on
Amazon

This table covers the chains that drive the balance shafts.

Balance Shaft Chain Guide

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.7L L4 95612
🇲🇽 MX
Left
View on
Amazon
CLOYES Fits: 2.7L L4 95613
🇲🇽 MX
Right
View on
Amazon
FVP Fits: 2.7L L4 95612
🇲🇽 MX
Left
View on
Amazon
FVP Fits: 2.7L L4 95613
🇲🇽 MX
Right
View on
Amazon

This table covers the guides that keep the balance-shaft chain on its path.

Conversion / Lower Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 54313700
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 54255500
🇲🇽 MX
Engine # 1GD-FTV
View on
Amazon

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Crankshaft Seal

Brand Part Number Markets Notes Buy
AJUSA Popular Fits: 2.7L L4 15049500
🇲🇽 MX
RearCounter Clockwise
View on
Amazon
AJUSA Fits: 2.7L L4 15103500
🇲🇽 MX
FrontClockwise
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 15082900
🇲🇽 MX
Front50 X 68 X 9/14
Fitment notes — AJUSA 15082900
Front50 X 68 X 9/14ClockwiseEngine 1GD-FTV
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 15103900
🇲🇽 MX
Rear95 X 115 X 11/13.5
Fitment notes — AJUSA 15103900
Rear95 X 115 X 11/13.5Counter ClockwiseEngine 1GD-FTV
View on
Amazon
ELRING Fits: 2.7L L4 853500
🇲🇽 MX
Height [MM]: 7Swirl Type: Right-hand Twist
Fitment notes — ELRING 853500
Height [MM]: 7Swirl Type: Right-hand Twist
Base Model
View on
Amazon
ELRING Fits: 2.7L L4 884630
🇲🇽 MX
Swirl Type: Left-hand Twist
Fitment notes — ELRING 884630
Swirl Type: Left-hand Twist
Base Model
View on
Amazon
ELRING Fits: 2.7L L4 933500
🇲🇽 MX
Height [MM]: 10Swirl Type: Right-hand Twist
Fitment notes — ELRING 933500
Height [MM]: 10Swirl Type: Right-hand Twist
Base Model
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 81067900
🇲🇽 MX
Engine # 1GD-FTV
View on
Amazon

This table covers the bolts that clamp the cylinder head to the block.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 10258400
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10258400
Multi Layered Steel
96 Bore Diameter
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 10228300
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10228300
Multi Layered Steel
93.5 Bore DiameterEngine 1GD-FTVPiston Stand Out from 0.355 To 0.405with 1 Grooves(1.10) Thickness
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 10228310
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10228310
Multi Layered Steel
93.5 Bore DiameterEngine 1GD-FTVPiston Stand Out from 0.405 To 0.455with 2 Grooves(1.15) Thickness
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 10228320
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10228320
Multi Layered Steel
93.5 Bore DiameterEngine 1GD-FTVPiston Stand Out from 0.455 To 0.505with 3 Grooves(1.20) Thickness
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 10228330
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10228330
Multi Layered Steel
93.5 Bore DiameterEngine 1GD-FTVPiston Stand Out from 0.505 To 0.555with 4 Grooves(1.25) Thickness
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 10228340
🇲🇽 MX
Multi Layered Steel
Fitment notes — AJUSA 10228340
Multi Layered Steel
93.5 Bore DiameterEngine 1GD-FTVPiston Stand Out from 0.555 To 0.605with 5 Grooves(1.30) Thickness
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 52593500
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 53072600
🇲🇽 MX
Does Not Include Cylinder Head Gasket
Fitment notes — AJUSA 53072600
Does Not Include Cylinder Head Gasket
Engine 1GD-FTV
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Engine Kit Gasket Set

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 50542100
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 51078000
🇲🇽 MX
Does Not Include Cylinder Head Gasket
Fitment notes — AJUSA 51078000
Does Not Include Cylinder Head Gasket
Engine 1GD-FTV
View on
Amazon

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake Manifold Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 13213700
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 13280000
🇲🇽 MX
Engine # 1GD-FTV
View on
Amazon
ELRING Fits: 2.7L L4 908520
🇲🇽 MX
Material: FW-522
Fitment notes — ELRING 908520
Material: FW-522
Base Model
View on
Amazon
VICTOR REINZ Fits: 2.7L L4 715364800
🇲🇽 MX
Set
Fitment notes — VICTOR REINZ 715364800
Set
Replaces OE Part Number(s) 11213-75040
View on
Amazon

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil

Full Synthetic

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.7L L4 VV935
🇲🇽 MX
Advanced Full Synthetic SAE 10W-301 Quart
View on
Amazon
VALVOLINE Fits: 2.7L L4 881165
🇲🇽 MX
Advanced Full Synthetic SAE 10W-30Easy Pour 5 Quart
View on
Amazon

High Mileage (>75,000 Miles)

Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.7L L4 881052
🇲🇽 MX
Max Life High Mileage SAE 10W-305 Gallon Bay Box
View on
Amazon
Brand Part Number Markets Notes Buy
VALVOLINE Fits: 2.8L L4 DIESEL Turbocharged 787301
🇲🇽 MX
European Vehicle Full Synthetic SAE 5W-301 Quart
View on
Amazon

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.

Oil Cooler Seal

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 01184100
🇲🇽 MX
View on
Amazon

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Oil Drain Plug

Brand Part Number Markets Notes Buy
AGS Fits: 2.8L L4 DIESEL Turbocharged ODP00011
🇲🇽 MX
M12x1.25
View on
Amazon
DORMAN Fits: 2.8L L4 DIESEL Turbocharged 090038
🇲🇽 MX
StandardM12-1.25
Fitment notes — DORMAN 090038
StandardM12-1.25Head Size 14MM
View on
Amazon
DORMAN Fits: 2.8L L4 DIESEL Turbocharged 090049
🇲🇽 MX
Pilot PointM12-1.25
Fitment notes — DORMAN 090049
Pilot PointM12-1.25Head Size 13MM
View on
Amazon
ELRING Fits: 2.7L L4 587290
🇲🇽 MX
without Seal RingBolt Head-/Nut Design: Male Hex
Fitment notes — ELRING 587290
without Seal RingBolt Head-/Nut Design: Male HexThread Size: M12X1,25x11
Base Model
View on
Amazon
ELRING Fits: 2.7L L4 952850
🇲🇽 MX
with Seal Ring
Fitment notes — ELRING 952850
with Seal Ring
Base Model
View on
Amazon

This table covers the drain plugs in the oil pan.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 22005800
🇲🇽 MX
View on
Amazon
DORMAN Fits: 2.8L L4 DIESEL Turbocharged 095156
🇲🇽 MX
View on
Amazon
ELRING Fits: 2.7L L4 473500
🇲🇽 MX
Base Model
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filler Cap

Brand Part Number Markets Notes Buy
GATES Fits: 2.7L L4 31285
🇲🇽 MX
View on
Amazon
MOTORAD Fits: all 2018 Hilux engines MO155
🇲🇽 MX
Material: Plastic, Rubber
View on
Amazon

This table covers the caps on the oil filler neck.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: all 2018 Hilux engines PG241
🇲🇽 MX
Spin-On
View on
Amazon
VARIOUS MFR Fits: all 2018 Hilux engines PO241TY1
🇲🇽 MX
OE Style
View on
Amazon

High Performance / Heavy Duty

Brand Part Number Markets Notes Buy
MOBIL Fits: all 2018 Hilux engines M1102A
🇲🇽 MX
Extended Performance
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR Fits: all 2018 Hilux engines PG241EX
🇲🇽 MX
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Timing Chain

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.7L L4 94221
🇲🇽 MX
Center
View on
Amazon
CLOYES Fits: 2.7L L4 94197
🇲🇽 MX
Inner
View on
Amazon
FVP Fits: 2.7L L4 94197
🇲🇽 MX
Inner
View on
Amazon
FVP Fits: 2.7L L4 94221
🇲🇽 MX
Center
View on
Amazon
MELLING Fits: 2.7L L4 4221
🇲🇽 MX
View on
Amazon

This table covers the timing chains that keep the cams in time with the crank.

Timing Chain & Component Kit

Brand Part Number Markets Notes Buy
CLOYES Popular Fits: 2.7L L4 94221SX
🇲🇽 MX
Does Not Include SprocketsIncludes: Timing Chain (2), Timing Chain Tensioner (2), Timing Damper, Timing Chain Guide (2), Balance Shaft Chain Guide (2), Timing Chain Tensioner Guide
View on
Amazon
INA Fits: 2.7L L4 ZC10042K
🇲🇽 MX
Kit Contains 1 Chain, 2 Guides, 1 Tensioner Guide, 1 Tensioner, Chain Protect AdditiveDoes Not Include Cam Sprocket
Fitment notes — INA ZC10042K
Kit Contains 1 Chain, 2 Guides, 1 Tensioner Guide, 1 Tensioner, Chain Protect AdditiveDoes Not Include Cam SprocketDoes Not Include Crank Sprocket
View on
Amazon
INA Fits: 2.7L L4 ZC1004K
🇲🇽 MX
Includes 1 Chain, 1 TensionerIncludes Chain Protect Additive
Fitment notes — INA ZC1004K
Includes 1 Chain, 1 TensionerIncludes Chain Protect AdditiveDoes Not Include Cam SprocketDoes Not Include Crank Sprocket
View on
Amazon
INA Fits: 2.7L L4 ZC94221SX
🇲🇽 MX
Does Not Include SprocketsIncludes 2 Chains, 4 Guides, 2 Tensioner Arms, 2 Tensioners
Fitment notes — INA ZC94221SX
Does Not Include SprocketsIncludes 2 Chains, 4 Guides, 2 Tensioner Arms, 2 TensionersDoes Not Include Cam SprocketDoes Not Include Crank Sprocket
View on
Amazon
MELLING Fits: 2.7L L4 34221SAX
🇲🇽 MX
Includes Balance Shaft Chain & Timing ChainDoes Not Include Sprockets
View on
Amazon

This table covers kits that group a timing chain with the related tensioners and guides.

Timing Chain Guide / Damper

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.7L L4 BG5614
🇲🇽 MX
Upper
View on
Amazon
MELLING Popular Fits: 2.7L L4 BT5610
🇲🇽 MX
Tensioner Arm
View on
Amazon
CLOYES Fits: 2.7L L4 95614
🇲🇽 MX
Guide
Fitment notes — CLOYES 95614
Guide
Upper
View on
Amazon
CLOYES Fits: 2.7L L4 95362
🇲🇽 MX
DAMPER
Fitment notes — CLOYES 95362
DAMPER
Upper Inner
View on
Amazon
CLOYES Fits: 2.7L L4 95610
🇲🇽 MX
Tensioner ArmRight
View on
Amazon
CLOYES Fits: 2.7L L4 95611
🇲🇽 MX
Guide
Fitment notes — CLOYES 95611
Guide
Left
View on
Amazon

This table covers the guides and dampers that keep the timing chain on its path.

Timing Chain Tensioner

Brand Part Number Markets Notes Buy
MELLING Popular Fits: 2.7L L4 BT5615
🇲🇽 MX
View on
Amazon
CLOYES Fits: 2.7L L4 95358
🇲🇽 MX
Inner
View on
Amazon
CLOYES Fits: 2.7L L4 95615
🇲🇽 MX
Right
View on
Amazon
FVP Fits: 2.7L L4 95358
🇲🇽 MX
Inner
View on
Amazon
FVP Fits: 2.7L L4 95615
🇲🇽 MX
Right
View on
Amazon

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.

Timing Crank Sprocket

Brand Part Number Markets Notes Buy
CLOYES Fits: 2.7L L4 S957
🇲🇽 MX
View on
Amazon
FVP Fits: 2.7L L4 S957
🇲🇽 MX
View on
Amazon
MELLING Fits: 2.7L L4 S957
🇲🇽 MX
Outer
View on
Amazon

This table covers the crankshaft sprockets that drive the timing chain or belt.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 11171300
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 56066400
🇲🇽 MX
Engine 1GD-FTV
View on
Amazon
ELRING Fits: 2.7L L4 094920
🇲🇽 MX
Base Model
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Lifter

Brand Part Number Markets Notes Buy
AJUSA Fits: 2.7L L4 85010900
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 85022100
🇲🇽 MX
Engine 1GD-FTV
View on
Amazon

This table covers the lifters / tappets that transfer cam motion to the valves.

Valve Stem Seal

Brand Part Number Markets Notes Buy
ELRING Popular Fits: 2.7L L4 215420
🇲🇽 MX
Height [MM]: 10Valve Stem Diameter [MM]: 5
Fitment notes — ELRING 215420
Height [MM]: 10Valve Stem Diameter [MM]: 5Valve Type: for Inlet Valves
Base Model
View on
Amazon
ELRING Popular Fits: 2.7L L4 215710
🇲🇽 MX
Set
Fitment notes — ELRING 215710
Set
Base Model
View on
Amazon
AJUSA Fits: 2.7L L4 12027000
🇲🇽 MX
Intake4.4 x 10 x 10
View on
Amazon
AJUSA Fits: 2.7L L4 12027100
🇲🇽 MX
Exhaust4.3 x 10 x 10
View on
Amazon
AJUSA Fits: 2.7L L4 57050200
🇲🇽 MX
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 12020300
🇲🇽 MX
5 x 10.5 x 11Engine # 1GD-FTV
View on
Amazon
AJUSA Fits: 2.8L L4 DIESEL Turbocharged 57039300
🇲🇽 MX
Engine # 1GD-FTV
View on
Amazon
ELRING Fits: 2.7L L4 170020
🇲🇽 MX
Outside Diameter: 12.5 mmThickness: 10.0 mm
Fitment notes — ELRING 170020
Outside Diameter: 12.5 mmThickness: 10.0 mmValve Type: for Exhaust Valves
Base Model
View on
Amazon

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Variable Valve Timing (VVT) Solenoid / Actuator

Economy

Brand Part Number Markets Notes Buy
DORMAN Popular Fits: 2.7L L4 918091
🇲🇽 MX
Intake
View on
Amazon
GATES Fits: 2.7L L4 VVS156
🇲🇽 MX
Intake
View on
Amazon
ROSTRA Fits: 2.7L L4 790139
🇲🇽 MX
Intake
View on
Amazon
SPECTRA PREMIUM Fits: 2.7L L4 VTS1078
🇲🇽 MX
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 2.7L L4 VVT368
🇲🇽 MX
Exhaust
View on
Amazon

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.

Buying Engine Parts for a 2018 Toyota Hilux

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Valve Stem Seal and Crankshaft Seal .

Frequently Asked Questions

How many engine parts fit the 2018 Toyota Hilux?

Our catalog currently lists 90 engine parts for the 2018 Toyota Hilux across 24 subcategories and 17 brands, covering both the 2.7L L4 and the 2.8L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.

Do engine parts differ between 2018 Toyota Hilux engines?

Some do. 5 parts fit every engine; the other 85 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of engine problems on a 2018 Toyota Hilux?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What oil viscosity is listed for the 2018 Toyota Hilux?

Oil rows on this page include SAE 5W-30 and SAE 10W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Toyota Hilux was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2018 Toyota Hilux?

First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2018 Toyota Hilux

Engine Parts for Other Toyota Hilux Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.