2018 Toyota Prius V Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2018 Toyota Prius V — TOPLINE RBTO55.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2018 Toyota Prius V, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 54308500, FEL-PRO CS26515 and MAHLE / CLEVITE CS54773, plus the other parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2018 Toyota Prius V come from TOPLINE.

Part numbers include TOPLINE TWTO39 and TOPLINE MBTO55.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts for the 2018 Toyota Prius V come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

10 Crankshaft Seal parts for the 2018 Toyota Prius V come from 6 brands — FEL-PRO, NATIONAL, AJUSA and 3 other brands. The "Popular" part is FEL-PRO BS40732.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts are listed for the 2018 Toyota Prius V, from FEL-PRO, MAHLE / CLEVITE, SKP and 1 other brand.

Listed part numbers: FEL-PRO ES72434, MAHLE / CLEVITE GS33762 and SKP SKES72434, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Cylinder Head Gasket parts are listed for the 2018 Toyota Prius V, from AJUSA, FEL-PRO, MAHLE / CLEVITE and 1 other brand.

Listed part numbers: AJUSA 10258600, FEL-PRO 26515PT and MAHLE / CLEVITE 55468, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts are listed for the 2018 Toyota Prius V, from FEL-PRO, AJUSA, MAHLE / CLEVITE and 2 other brands. FEL-PRO HS26515PT1VK carries the "Popular" badge.

Part numbers include FEL-PRO HS26515PT1VK, AJUSA 52593400 and MAHLE / CLEVITE HS55468, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2018 Toyota Prius V come from KAT'S HEATERS.

This group includes KAT'S HEATERS 11813 and KAT'S HEATERS 28813.

This table covers the Engine covers. Read more

TECHPRO supplies the 4 Engine Cover parts for the 2018 Toyota Prius V.

This group includes TECHPRO SC1228103, TECHPRO TO1228169 and TECHPRO TO1228190 and the remaining parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2018 Toyota Prius V, from AJUSA and TOPLINE.

Listed part numbers: AJUSA 50542000 and TOPLINE CGSTO55.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2018 Toyota Prius V come from 3 brands — MELLING, SBI and TOPLINE.

Part numbers include MELLING V3366, SBI 13366 and TOPLINE EVTO55.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

One part is listed for the 2018 Toyota Prius V — DORMAN 594404.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

3 Intake Manifold parts for the 2018 Toyota Prius V come from 3 brands — ACKOJA, DORMAN and LARES.

Listed part numbers: ACKOJA A701058, DORMAN 615945 and LARES 34065.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts are listed for the 2018 Toyota Prius V, from FEL-PRO and MAHLE / CLEVITE.

This group includes FEL-PRO MS97144 and MAHLE / CLEVITE MS19723.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2018 Toyota Prius V come from 3 brands — MELLING, SBI and TOPLINE.

This group includes MELLING V3365, SBI 13365 and TOPLINE IVTO55.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2018 Toyota Prius V come from 5 brands — BECK/ARNLEY, PIONEER, ANCHOR and 2 other brands. The "Popular" part is ANCHOR 10169.

Listed part numbers: ANCHOR 10169, BECK/ARNLEY 1042236 and BECK/ARNLEY 1042233, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

14 Oil parts for the 2018 Toyota Prius V come from 3 brands — MOBIL, VALVOLINE and PENTOSIN. The "Popular" part is MOBIL 124184.

The Full Synthetic section lists 9 options from PENTOSIN, MOBIL and VALVOLINE — full-synthetic oils. MOBIL 124184 is listed in this group.

In the High Mileage (>75,000 Miles) grade, MOBIL and VALVOLINE supply 5 parts: oils grouped for high-mileage engines. A representative part number is MOBIL 125203.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 917392.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2018 Toyota Prius V come from 4 brands — DORMAN, ACKOJA, AGS and 1 other brand. The "Popular" part is DORMAN 090038.

This group includes DORMAN 090038, ACKOJA A700114 and AGS ODP00011 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts are listed for the 2018 Toyota Prius V, from AJUSA, DORMAN, FEL-PRO and 1 other brand.

Listed part numbers: AJUSA 22005800, DORMAN 095156 and FEL-PRO 70822, plus the other parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2018 Toyota Prius V come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand.

Listed part numbers: CALORSTAT OC2312, DORMAN 84111 and GATES 31285, plus the other parts above.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

15 Oil Filter parts for the 2018 Toyota Prius V come from 10 brands — CHAMP / LUBER-FINER, VARIOUS MFR, FRAM and 7 other brands. The "Popular" part is CHAMP / LUBER-FINER P980.

The Economy section lists 2 options from CHAMP / LUBER-FINER and VARIOUS MFR — the catalog's value-priced group. CHAMP / LUBER-FINER P980 is listed in this group.

The High Performance / Heavy Duty section lists 2 options from FRAM and MOBIL — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. FRAM XG10358 is listed in this group.

In the Standard Replacement grade, ACDELCO, HENGST, ACKOJA and 6 other brands supply 11 parts: built to original-equipment specification. A representative part number is ACDELCO PF1233.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Oil Filter Adapter Gasket / O-Ring parts are listed for the 2018 Toyota Prius V, from FEL-PRO and MAHLE / CLEVITE.

Listed part numbers: FEL-PRO ES71858 and MAHLE / CLEVITE B33713.

This table covers the Oil Filter covers. Read more

4 Oil Filter Cover parts are listed for the 2018 Toyota Prius V, from AUTOTECNICA, ACKOJA and MOTORAD.

Part numbers include ACKOJA A700765, AUTOTECNICA TY1418630 and AUTOTECNICA TY1415894PRM, among others listed above.

This table covers the oil pans that hold the engine's oil sump. Read more

7 Oil Pan parts are listed for the 2018 Toyota Prius V, from SKP, DORMAN, AUTOTECNICA and 2 other brands. AUTOTECNICA TY1415247 carries the "Popular" badge.

Listed part numbers: AUTOTECNICA TY1415247, SKP SK264324 and DORMAN 264324, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts for the 2018 Toyota Prius V come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.

Part numbers include FEL-PRO OS30829, MAHLE / CLEVITE OS32419 and VICTOR REINZ 711418300.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

This group shows a single part: PIERBURG 706595140.

This table covers the chains that drive the oil pump. Read more

7 Oil Pump Chain parts are listed for the 2018 Toyota Prius V, from S.A. GEAR, PREFERRED COMPONENTS INC, INA and 2 other brands. S.A. GEAR RC1036 carries the "Popular" badge.

The Chain Only section lists 2 options from S.A. GEAR and INA — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. S.A. GEAR RC1036 is listed in this group.

Economy: 1 part, from PREFERRED COMPONENTS INC. A representative part number is PREFERRED COMPONENTS INC C1001.

In the Kit grade, PREFERRED COMPONENTS INC and S.A. GEAR supply 2 parts: grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. A representative part number is PREFERRED COMPONENTS INC TS10000.

The Standard Replacement section: 2 options from MELLING and CLOYES. MELLING 751 is listed in this group.

Listed part numbers: S.A. GEAR RC1036, INA ZCC751 and PREFERRED COMPONENTS INC C1001, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Oil Pump Chain Tensioner parts for the 2018 Toyota Prius V come from 5 brands — CLOYES, INA, MELLING and 2 other brands. The "Popular" part is CLOYES 95936.

This group includes CLOYES 95936, INA ZT91136 and MELLING BT5936 and the remaining parts above.

This table covers the Oil Pump Drive gears. Read more

One part is listed for the 2018 Toyota Prius V — PREFERRED COMPONENTS INC G56125.

This table covers the Oil Pump sprockets. Read more

4 Oil Pump Sprocket parts are listed for the 2018 Toyota Prius V, from CLOYES, FVP, MELLING and 1 other brand.

Part numbers include CLOYES S923, among others listed above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: TOPLINE PBTO39.

This table covers the Thrust washers. Read more

This group shows a single part: KING ENGINE BEARINGS TW185AM.

This table covers the Timing Cam sprockets. Read more

5 Timing Cam Sprocket parts for the 2018 Toyota Prius V come from 5 brands — CLOYES, FVP, INA and 2 other brands. The "Popular" part is CLOYES S846.

Listed part numbers: CLOYES S846 and INA ZSS846, plus the other parts above.

This table covers the timing chains that keep the cams in time with the crank. Read more

5 Timing Chain parts are listed for the 2018 Toyota Prius V, from S.A. GEAR, CLOYES, FVP and 2 other brands. S.A. GEAR C1054 carries the "Popular" badge.

This group includes S.A. GEAR C1054 and CLOYES 94220 and the remaining parts above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

13 Timing Chain & Component Kit parts for the 2018 Toyota Prius V come from 6 brands — S.A. GEAR, CLOYES, GATES and 3 other brands. The "Popular" part is CLOYES 94220SX.

The Economy section: 7 options from S.A. GEAR, GATES and PREFERRED COMPONENTS INC. GATES CHK143 is listed in this group.

Standard Replacement: 6 parts, from CLOYES, INA and MELLING. A representative part number is CLOYES 94220SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

13 Timing Chain Guide / Damper parts are listed for the 2018 Toyota Prius V, from S.A. GEAR, CLOYES, PREFERRED COMPONENTS INC and 2 other brands. S.A. GEAR 71100 carries the "Popular" badge.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

5 Timing Chain Tensioner parts for the 2018 Toyota Prius V come from 5 brands — CLOYES, INA, MELLING and 2 other brands. The "Popular" part is CLOYES 95935.

This group includes CLOYES 95935, INA ZT91135 and MELLING BT5935 and the remaining parts above.

This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: MAHLE / CLEVITE JV5188.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

7 Timing Crank Sprocket parts for the 2018 Toyota Prius V come from 4 brands — S.A. GEAR, CLOYES, PREFERRED COMPONENTS INC and 1 other brand. The "Popular" part is S.A. GEAR S1329.

Listed part numbers: S.A. GEAR S1329, S.A. GEAR S1330 and CLOYES S1097, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts are listed for the 2018 Toyota Prius V, from ANCHOR, PIONEER and WESTAR.

Listed part numbers: ANCHOR 10172, PIONEER 630172 and WESTAR EM7648.

This table covers the Valve covers. Read more

One part is listed for the 2018 Toyota Prius V — ACKOJA A700859.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts for the 2018 Toyota Prius V come from 3 brands — VICTOR REINZ, AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 56086800, MAHLE / CLEVITE VS50567A and VICTOR REINZ 151837501, among others listed above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 2018 Toyota Prius V come from 2 brands — SBI and TOPLINE.

Listed part numbers: SBI 1403135, SBI 1403134 and TOPLINE EVGTO55, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 2018 Toyota Prius V come from 2 brands — AJUSA and TOPLINE.

Listed part numbers: AJUSA 85010900 and TOPLINE LIFTO55P.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

One part is listed for the 2018 Toyota Prius V — SBI 1211100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts for the 2018 Toyota Prius V come from 5 brands — ENGINETECH, SBI, FEL-PRO and 2 other brands. The "Popular" part is ENGINETECH S9251.

Part numbers include ENGINETECH S9251, FEL-PRO SS728781 and ENGINETECH S9252, among others listed above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

8 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2018 Toyota Prius V come from 8 brands — DORMAN, SKP, GATES and 5 other brands. The "Popular" part is DORMAN 917235.

The Economy section: 6 options from DORMAN, SKP, GATES and 3 other brands. DORMAN 917235 is listed in this group.

Standard Replacement: 2 parts, from CLOYES and NTK. A representative part number is CLOYES VTS140.

Listed part numbers: DORMAN 917235, SKP SK917235 and GATES VVS120, plus the other parts above.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: ACKOJA A700753.