2018 Toyota Sequoia Steering Parts

This table covers the steering knuckles that carry the hub, caliper and ball joints. Read more

2 Knuckle parts for the 2018 Toyota Sequoia come from ACKOJA.

Listed part numbers: ACKOJA A700906 and ACKOJA A700905.

This table covers the Power Steering coolers. Typical signs include overheated fluid, a leak at the fittings, or mixed fluids in the reservoir. Flush the lines when you replace a cooler. Read more

2 Power Steering Cooler parts are listed for the 2018 Toyota Sequoia, from DORMAN and EDELMANN.

Part numbers include DORMAN 918688 and EDELMANN 58200.

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

30 Power Steering Fluid parts are listed for the 2018 Toyota Sequoia, from VALVOLINE, PRESTONE, ACDELCO and 5 other brands. ACDELCO 109243 carries the "Popular" badge. They are grouped as ATF +4, Dexron, Mercon, Multi-Vehicle and Type III (H), with Multi-Vehicle the largest group at 17 parts from PRESTONE, VALVOLINE, MOBIL and 3 other brands.

This table covers the Power Steering Pressure hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Power Steering Pressure Hose parts are listed for the 2018 Toyota Sequoia, from EDELMANN, REIN and SUNSONG.

Part numbers include EDELMANN 92730, REIN PSH0570 and SUNSONG 3404152.

This table covers the Power Steering pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

This group shows a single part: REIN ELP0142.

This table covers the Power Steering pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

8 Power Steering Pump parts are listed for the 2018 Toyota Sequoia, from AAE, TERREPOWER, CARDONE and 3 other brands. AAE 5637N carries the "Popular" badge.

In the New grade, AAE, CARDONE, EDELMANN and 3 other brands supply 7 parts: brand-new units rather than rebuilt ones. A representative part number is AAE 5637N.

In the Remanufactured grade, TERREPOWER supplies 1 part: factory-rebuilt units with new wear components. A representative part number is TERREPOWER 9901072.

Part numbers include AAE 5637N, AAE 5637NKTA and CARDONE 96375, among others listed above.

This table covers the Power Steering reservoirs. Read more

6 Power Steering Reservoir parts for the 2018 Toyota Sequoia come from 6 brands — DORMAN, SKP, AAE and 3 other brands. The "Popular" part is DORMAN 603828.

This group includes DORMAN 603828, SKP SK603828 and AAE RES0109 and the remaining parts above.

This table covers the Power Steering Reservoir (Suction) hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

3 Power Steering Reservoir (Suction) Hose parts are listed for the 2018 Toyota Sequoia, from EDELMANN, REIN and SUNSONG.

Part numbers include EDELMANN 81547, REIN PSH0565 and SUNSONG 3403619.

This table covers the Power Steering Return hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

4 Power Steering Return Hose parts for the 2018 Toyota Sequoia come from 2 brands — EDELMANN and SUNSONG.

Listed part numbers: EDELMANN 80713, EDELMANN 92486 and SUNSONG 3402992, plus the other parts above.

This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak. Read more

7 Rack and Pinion parts for the 2018 Toyota Sequoia come from 6 brands — MAVAL, EDELMANN, AAE and 3 other brands. The "Popular" part is EDELMANN 2141.

The New section: 5 options from EDELMANN, AAE, LARES and 2 other brands. EDELMANN 2141 is listed in this group.

The Remanufactured section: 2 options from MAVAL and TERREPOWER. MAVAL 93219M is listed in this group.

This group includes EDELMANN 2141, AAE 3379N and LARES 28125 and the remaining parts above.

This table covers the rubber boots that seal the inner tie-rod joints on the rack. Read more

4 Rack and Pinion Bellow parts are listed for the 2018 Toyota Sequoia, from BECK/ARNLEY, DELPHI, DORMAN and 1 other brand.

Part numbers include BECK/ARNLEY 1033097, DELPHI TBR5008 and DORMAN 541532, among others listed above.

This table covers the Steering shafts. Read more

3 Steering Shaft parts for the 2018 Toyota Sequoia come from 2 brands — DORMAN and LARES.

Part numbers include DORMAN 425467, DORMAN 425466 and LARES 597.

This table covers the Steering Wheel position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

This group shows a single part: WELLS 5S9420.

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment. Read more

33 Tie Rod End parts are listed for the 2018 Toyota Sequoia, from MEVOTECH, BECK/ARNLEY, DELPHI and 8 other brands. DELPHI TA5253 carries the "Popular" badge. They are grouped as Daily Driver, Economy and Premium, with Daily Driver the largest group at 16 parts from DELPHI, MOOG, MEVOTECH and 3 other brands.