2021 Toyota Highlander Suspension Parts

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

7 Alignment Bolt / Camber Plate parts are listed for the 2021 Toyota Highlander, from SKP, MOOG, ACDELCO and 3 other brands. MOOG K90477 carries the "Popular" badge. All of them fit every engine offered in the 2021 Highlander.

The Daily Driver section lists 3 options from MOOG, ACDELCO and DELPHI — grouped for everyday commuting duty. MOOG K90477 is listed in this group.

In the Economy grade, SKP, DORMAN and FVP supply 4 parts: the catalog's value-priced group. A representative part number is SKP SK90477.

This group includes MOOG K90477, ACDELCO 45K18039 and DELPHI TAL10017 and the remaining parts above.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

6 Ball Joint parts are listed for the 2021 Toyota Highlander, from MEVOTECH, MOOG, DORMAN and 2 other brands. MEVOTECH MS86581 carries the "Popular" badge. All of them fit every engine offered in the 2021 Highlander.

The Daily Driver section: 4 options from MEVOTECH, MOOG, DORMAN and 1 other brand. MEVOTECH MS86581 is listed in this group.

Economy: 2 parts, from BECK/ARNLEY and MEVOTECH. A representative part number is BECK/ARNLEY 1018815.

Part numbers include MEVOTECH MS86581, MOOG K500458 and DORMAN 539935, among others listed above.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

15 Control Arm parts are listed for the 2021 Toyota Highlander, from MEVOTECH, DORMAN and MOOG. MOOG RK642987 carries the "Popular" badge. All of them fit every engine offered in the 2021 Highlander.

The Daily Driver section: 11 options from DORMAN, MEVOTECH and MOOG. MOOG RK642987 is listed in this group.

Economy: 4 parts, from MEVOTECH. A representative part number is MEVOTECH GS861145.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

2 Ride Height Sensor parts are listed for the 2021 Toyota Highlander, from AUTOTECNICA and VEMO. All of them fit every engine offered in the 2021 Highlander.

This group includes AUTOTECNICA TY1321026 and VEMO V70720392.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

12 Shock / Strut parts are listed for the 2021 Toyota Highlander, from PRT, FCS, KYB and 2 other brands. FCS 342944 carries the "Popular" badge. 11 parts fit every engine; the other 1 is engine-specific.

Economy: 4 parts, from PRT. A representative part number is PRT 930796.

In the Original Ride Quality grade, FCS, KYB, MONROE and 1 other brand supply 8 parts: grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. A representative part number is FCS 342944.

This table covers complete strut assemblies with the spring already installed. Read more

6 Shock / Strut & Coil Spring Assembly parts are listed for the 2021 Toyota Highlander, from PRT, FCS and TOP NOTCH. PRT 920640 carries the "Popular" badge. All of them fit every engine offered in the 2021 Highlander.

Economy: 2 parts, from PRT. A representative part number is PRT 920640.

Original Ride Quality: 4 parts, from FCS and TOP NOTCH. A representative part number is FCS 1334057R.

Part numbers include PRT 920640, PRT 920641 and FCS 1334057R, among others listed above.

This table covers the Shock / Strut bellows. Read more

This group shows a single part: KYB SB191.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Shock / Strut Mount parts for the 2021 Toyota Highlander come from 2 brands — BECK/ARNLEY and KYB. Every part fits both the 2.5L L4 ELECTRIC/GAS and the 3.5L V6.

This group includes BECK/ARNLEY 1018932 and KYB SM5969.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

11 Sway Bar Link parts are listed for the 2021 Toyota Highlander, from MEVOTECH, SUSPENSIA, BECK/ARNLEY and 3 other brands. MEVOTECH MK90344 carries the "Popular" badge. All of them fit every engine offered in the 2021 Highlander.

The Daily Driver section: 7 options from MEVOTECH, SUSPENSIA, 555 and 2 other brands. MEVOTECH MK90344 is listed in this group.

Economy: 3 parts, from BECK/ARNLEY and MEVOTECH. A representative part number is MEVOTECH GK90344.

The Premium section lists 1 option from MEVOTECH — a step above OE specification in materials, tolerances or warranty terms. MEVOTECH TXK90344 is listed in this group.