2022 Toyota Tacoma Engine Parts

This table covers the chains that drive the balance shafts. Read more

3 Balance Shaft Chain parts for the 2022 Toyota Tacoma come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

In the Chain Only grade, MELLING and PREFERRED COMPONENTS INC supply 2 parts: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is MELLING 8MMSRH82.

The Kit section lists 1 option from MELLING — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. MELLING 38MMSRH82SX is listed in this group.

This group includes MELLING 8MMSRH82, PREFERRED COMPONENTS INC C11131 and MELLING 38MMSRH82SX.

This table covers the guides that keep the balance-shaft chain on its path. Read more

4 Balance Shaft Chain Guide parts for the 2022 Toyota Tacoma come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BG5612, MELLING BG5613 and MELLING BD362 and the remaining parts above.

This table covers the Balance Shaft Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Balance Shaft Chain Tensioner parts are listed for the 2022 Toyota Tacoma, from MELLING and PREFERRED COMPONENTS INC.

Listed part numbers: MELLING BT358 and PREFERRED COMPONENTS INC T66006.

This table covers the Balance Shaft sprockets. Read more

This group shows a single part: PREFERRED COMPONENTS INC G57201.

This table covers the connecting rods between each piston and the crankshaft. Read more

This group shows a single part: TOPLINE CRTO48.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Connecting Rod Bearing parts for the 2022 Toyota Tacoma come from 3 brands — KING ENGINE BEARINGS, TOPLINE and ENGINETECH.

Part numbers include ENGINETECH BB1035, KING ENGINE BEARINGS CR6873SM and KING ENGINE BEARINGS CR6873MC, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2022 Toyota Tacoma come from 2 brands — TOPLINE and AJUSA.

Part numbers include AJUSA 54318100, TOPLINE CBSTO48 and TOPLINE CBSTO49L.

This table covers the crankshafts that turn piston motion into rotation. Read more

This group shows a single part: TOPLINE CSTO48.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

TOPLINE supplies the 4 Crankshaft Main Bearing parts for the 2022 Toyota Tacoma.

This group includes TOPLINE TWTO48, TOPLINE MBTO48 and TOPLINE MBTO49 and the remaining parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts are listed for the 2022 Toyota Tacoma, from AJUSA, FEL-PRO and SKF.

Part numbers include AJUSA 15103800, AJUSA 15098700 and FEL-PRO BS40806, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2022 Toyota Tacoma come from 3 brands — TOPLINE, AJUSA and BECK/ARNLEY.

Listed part numbers: AJUSA 81013400, BECK/ARNLEY 0161020 and TOPLINE HBTO38, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Cylinder Head Gasket parts for the 2022 Toyota Tacoma come from 5 brands — AJUSA, FEL-PRO, ELRING and 2 other brands. The "Popular" part is AJUSA 10237100.

Part numbers include AJUSA 10237100, AJUSA 10237200 and AJUSA 52528200, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Cylinder Head Gasket Set parts for the 2022 Toyota Tacoma come from 3 brands — TOPLINE, AJUSA and MAHLE / CLEVITE.

Part numbers include AJUSA 52528100, MAHLE / CLEVITE HS55518 and TOPLINE HSTO48, among others listed above.

This table covers the Engine covers. Read more

3 Engine Cover parts for the 2022 Toyota Tacoma come from 2 brands — TECHPRO and VARIOUS MFR. Every part fits both the 2.7L L4 and the 3.5L V6.

Listed part numbers: TECHPRO TO1228241 and TECHPRO TO1228242, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2022 Toyota Tacoma come from 2 brands — TOPLINE and AJUSA.

Part numbers include AJUSA 50542400, TOPLINE CGSTO48 and TOPLINE CGSTO49L.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Exhaust Valve parts are listed for the 2022 Toyota Tacoma, from SBI, TOPLINE and MELLING.

Listed part numbers: MELLING V3087, SBI 13209 and SBI 13087, plus the other parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2022 Toyota Tacoma come from 2 brands — DAYCO and ULTRA-POWER.

This group includes DAYCO PB1654N and ULTRA-POWER 594365.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts for the 2022 Toyota Tacoma come from 3 brands — FEL-PRO, AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 13255600, FEL-PRO MS96924 and FEL-PRO MS97437, plus the other parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Plenum Gasket parts are listed for the 2022 Toyota Tacoma, from AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 01645000 and MAHLE / CLEVITE MS20627.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2022 Toyota Tacoma, from TOPLINE, MELLING, QUALCAST and 1 other brand.

This group includes MELLING V3086, QUALCAST 1013086 and SBI 13086 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

9 Motor Mount parts are listed for the 2022 Toyota Tacoma, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. SKP SKM8162 carries the "Popular" badge.

In the Economy grade, SKP supplies 1 part: the catalog's value-priced group. A representative part number is SKP SKM8162.

The Standard Replacement section lists 4 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 1 other brand — built to original-equipment specification. ANCHOR 8162 is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include SKP SKM8162, ANCHOR 8162 and DEA / MARMON RIDE CONTROL A42091, among others listed above.

This table covers the Motor Mount kits. Read more

ANCHOR supplies both parts for the 2022 Toyota Tacoma.

Listed part numbers: ANCHOR 300392 and ANCHOR 300391.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

32 Oil parts are listed for the 2022 Toyota Tacoma, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 25 parts from LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 2022 Toyota Tacoma — NISSENS 91453.

This table covers the drain plugs in the oil pan. Read more

4 Oil Drain Plug parts are listed for the 2022 Toyota Tacoma, from DORMAN, BECK/ARNLEY and REIN. 3 parts fit every engine; the other 1 is engine-specific.

This group includes BECK/ARNLEY 0160116, DORMAN 090038 and DORMAN 090049 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Drain Plug Gasket parts for the 2022 Toyota Tacoma come from 3 brands — AJUSA, DORMAN and FEL-PRO. 2 parts fit every engine; the other 1 is engine-specific.

This group includes AJUSA 22005800, DORMAN 095156 and FEL-PRO 70822.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2022 Toyota Tacoma, from CALORSTAT, GATES and MOTORAD. All of them fit every engine offered in the 2022 Tacoma.

This group includes CALORSTAT OC2312, GATES 31285 and MOTORAD MO155.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

32 Oil Filter parts are listed for the 2022 Toyota Tacoma, from VARIOUS MFR, WIX, BOSCH and 12 other brands. PRO-TEC PXL57047 carries the "Popular" badge. They are grouped as Economy, High Performance / Heavy Duty and Standard Replacement, with Standard Replacement the largest group at 16 parts from WIX, ACDELCO, BECK/ARNLEY and 7 other brands.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33838.

This table covers the Oil Filter covers. Read more

5 Oil Filter Cover parts for the 2022 Toyota Tacoma come from 4 brands — MOTORAD, DORMAN, ACKOJA and 1 other brand. The "Popular" part is DORMAN 917016.

This group includes DORMAN 917016, ACKOJA A700771 and MOTORAD MO300 and the remaining parts above.

This table covers the oil pans that hold the engine's oil sump. Read more

This group shows a single part: SPECTRA PREMIUM TOP39A.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 2022 Toyota Tacoma, from AUTOTECNICA, FEL-PRO and VICTOR REINZ. 1 part fits every engine; the other 2 are engine-specific.

Listed part numbers: AUTOTECNICA TY1415891, FEL-PRO OS30784 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2022 Toyota Tacoma, from MELLING, SEALED POWER and TOPLINE.

Part numbers include MELLING M582, SEALED POWER 22443709 and TOPLINE OPTO48LK.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2022 Toyota Tacoma — FEL-PRO 73595.

This table covers the pistons that travel in each cylinder. Typical signs include knock, blow-by, or a cylinder that will not hold compression. Piston work is a short-block job. Match bore, pin and ring pack in the notes — not the photo. Read more

2 Piston parts for the 2022 Toyota Tacoma come from TOPLINE.

Listed part numbers: TOPLINE PATO48L and TOPLINE PATO49L.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2022 Toyota Tacoma — TOPLINE PBD34.

This table covers the rings that seal each piston to the cylinder wall. Read more

2 Piston Ring parts for the 2022 Toyota Tacoma come from TOPLINE.

Listed part numbers: TOPLINE RSTO48 and TOPLINE RSTO49.

This table covers the Thrust washers. Read more

One part is listed for the 2022 Toyota Tacoma — KING ENGINE BEARINGS TW1036AM.

This table covers the timing chains that keep the cams in time with the crank. Read more

8 Timing Chain parts for the 2022 Toyota Tacoma come from 4 brands — MELLING, PREFERRED COMPONENTS INC, S.A. GEAR and 1 other brand. The "Popular" part is MELLING 1026.

Part numbers include MELLING 1026, CLOYES 94221 and MELLING 4221, among others listed above.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

9 Timing Chain & Component Kit parts are listed for the 2022 Toyota Tacoma, from INA, S.A. GEAR, MELLING and 1 other brand. MELLING 3953SX carries the "Popular" badge.

Economy: 2 parts, from S.A. GEAR. A representative part number is S.A. GEAR 76416S.

The Standard Replacement section: 3 options from MELLING, INA and TOPLINE. MELLING 3953SX is listed in this group.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

Part numbers include MELLING 3953SX, S.A. GEAR 76416S and S.A. GEAR 76416, among others listed above.

This table covers the guides and dampers that keep the timing chain on its path. Read more

9 Timing Chain Guide / Damper parts for the 2022 Toyota Tacoma come from 2 brands — MELLING and S.A. GEAR. The "Popular" part is MELLING BG6046.

Part numbers include MELLING BG6046, S.A. GEAR 71266 and MELLING BG5614, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

7 Timing Chain Tensioner parts are listed for the 2022 Toyota Tacoma, from MELLING and S.A. GEAR. S.A. GEAR 91356 carries the "Popular" badge.

Listed part numbers: S.A. GEAR 91356, S.A. GEAR 91358 and MELLING BT5615, plus the other parts above.

This table covers the Timing covers. Read more

This group shows a single part: TOPLINE TCTO48L.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

3 Timing Crank Sprocket parts are listed for the 2022 Toyota Tacoma, from CLOYES, MELLING and S.A. GEAR.

This group includes CLOYES S1403, MELLING S957 and S.A. GEAR S1524.

This table covers the Timing Idler sprockets. Read more

2 Timing Idler Sprocket parts for the 2022 Toyota Tacoma come from 2 brands — CLOYES and S.A. GEAR.

Listed part numbers: CLOYES S1402 and S.A. GEAR S1477.

This table covers the Valve covers. Read more

3 Valve Cover parts for the 2022 Toyota Tacoma come from 3 brands — AUTOTECNICA, DORMAN and SKP.

Listed part numbers: AUTOTECNICA TY1422156, DORMAN 264499 and SKP SK264499.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

9 Valve Cover Gasket parts are listed for the 2022 Toyota Tacoma, from VICTOR REINZ, BECK/ARNLEY and MAHLE / CLEVITE. BECK/ARNLEY 0362110 carries the "Popular" badge.

This group includes BECK/ARNLEY 0362110, MAHLE / CLEVITE VS50978 and BECK/ARNLEY 0362062 and the remaining parts above.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

5 Valve Guide parts are listed for the 2022 Toyota Tacoma, from SBI and TOPLINE.

Part numbers include SBI 1403130, SBI 1403135 and SBI 1403218, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

3 Valve Lifter parts are listed for the 2022 Toyota Tacoma, from TOPLINE and AJUSA.

This group includes AJUSA 85010900, TOPLINE LIFTO55P and TOPLINE A2319.

This table covers the Valve seats. Read more

2 Valve Seat parts for the 2022 Toyota Tacoma come from SBI.

Part numbers include SBI SB1288E1 and SBI SB1527E1.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: MELLING VS2506.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR726.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts for the 2022 Toyota Tacoma come from 2 brands — MELLING and SBI. Every part fits both the 2.7L L4 and the 3.5L V6.

Part numbers include MELLING VL1100 and SBI 1211100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Valve Stem Seal parts are listed for the 2022 Toyota Tacoma, from AJUSA, SBI, FEL-PRO and 1 other brand. FEL-PRO SS728783 carries the "Popular" badge. 3 parts fit every engine; the other 4 are engine-specific.

Listed part numbers: FEL-PRO SS728783, SBI 1221266 and AJUSA 12010800, plus the other parts above.