This page lists 8 ignition parts for the 2026 Toyota Corolla, across 3 part types, covering both the 1.8L L4 ELECTRIC/GAS and the 2.0L L4. Every part shows its brand, manufacturer part number and fitment notes.
The ignition system on the 2026 Toyota Corolla delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 8 listed parts are Camshaft Position Sensor (4 parts), Ignition Coil (3 parts) and Spark Plug (1 part).
The 2026 Toyota Corolla was sold with both the 1.8L L4 ELECTRIC/GAS and the 2.0L L4. 2 parts fit every engine; the other 6 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2026 Toyota Corolla ignition parts are BOSCH (2 parts), WALKER PRODUCTS (2 parts) and BECK/ARNLEY (2 parts), plus 2 more brands.
Each part number listed for the 2026 Toyota Corolla opens a page with every vehicle that part fits.
Camshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 1.8L L4 ELECTRIC/GAS | 0986280749 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Camshaft Position Sensor | View on Amazon |
| HELLA Fits: 1.8L L4 ELECTRIC/GAS | 009168411 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3-Pin Connectorwith Seal Ring | View on Amazon |
| WALKER PRODUCTS Fits: 1.8L L4 ELECTRIC/GAS | 2351343 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
| WALKER PRODUCTS Fits: 2.0L L4 | 2351507 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sensor Only | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
4 Camshaft Position Sensor parts are listed for the 2026 Toyota Corolla, from WALKER PRODUCTS, BOSCH and HELLA.
Listed part numbers: BOSCH 0986280749, HELLA 009168411 and WALKER PRODUCTS 2351343, plus the other parts above.
Ignition Coil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 1.8L L4 ELECTRIC/GAS | 1788598 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| BECK/ARNLEY Fits: 2.0L L4 | 1788596 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS Fits: all 2026 Corolla engines | UF848 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
3 Ignition Coil parts are listed for the 2026 Toyota Corolla, from BECK/ARNLEY and STANDARD MOTOR PRODUCTS. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: BECK/ARNLEY 1788598, BECK/ARNLEY 1788596 and STANDARD MOTOR PRODUCTS UF848.
Spark Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: all 2026 Corolla engines | 96353 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Fine Wire Double Iridium | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
This group shows a single part: BOSCH 96353.
Buying Ignition Parts for a 2026 Toyota Corolla
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Camshaft Position Sensor and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 2026 Toyota Corolla?
Our catalog currently lists 8 ignition parts for the 2026 Toyota Corolla across 3 subcategories and 5 brands, covering both the 1.8L L4 ELECTRIC/GAS and the 2.0L L4. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 2026 Toyota Corolla engines?
Some do. 2 parts fit every engine; the other 6 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 2026 Toyota Corolla?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2026 Toyota Corolla was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2026 Toyota Corolla?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2026 Toyota Corolla
Ignition Parts for Other Toyota Corolla Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.