This page lists 6 steering parts for the 1962 Triumph TR3A, across 2 part types, covering both the 2.0L L4 and the 2.1L L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 1962 Triumph TR3A, the steering system connects driver to road through the rack, pump, tie rods, and column components. All 6 listed parts are Power Steering Fluid (4 parts) and Steering Gear Housing Seal (2 parts).
The 1962 Triumph TR3A was sold with both the 2.0L L4 and the 2.1L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
3 brands supply steering parts for the 1962 Triumph TR3A, led by LUBEGARD (4 parts), SCHAEFFLER (1 part) and SKF (1 part).
Each part number listed for the 1962 Triumph TR3A opens a page with every vehicle that part fits.
Power Steering Fluid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LUBEGARD Fits: 2.0L L4 | 23201 | 🇺🇸 US | 1 QuartSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 2.0L L4 | 23205 | 🇺🇸 US | 5 GallonSynthetic Power Steering Fluid | View on Amazon |
| LUBEGARD Fits: 2.0L L4 | 23232 | 🇺🇸 US | Synthetic Power Steering Fluid1 Quart | View on Amazon |
| LUBEGARD Fits: 2.0L L4 | 23255 | 🇺🇸 US | 55 GallonSynthetic Power Steering Fluid | View on Amazon |
This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable.
4 Power Steering Fluid parts for the 1962 Triumph TR3A come from LUBEGARD.
Listed part numbers: LUBEGARD 23201, LUBEGARD 23205 and LUBEGARD 23232, plus the other parts above.
Steering Gear Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 2.0L L4 | SS2735 | 🇺🇸 US | 2.51" O.D. X 0.31" Width | View on Amazon |
| SKF Fits: 2.0L L4 | 16719 | 🇺🇸 US | Standard | View on Amazon |
This table covers the seals at the Steering Gear Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Steering Gear Housing Seal parts for the 1962 Triumph TR3A come from 2 brands — SCHAEFFLER and SKF.
Part numbers include SCHAEFFLER SS2735 and SKF 16719.
Buying Steering Parts for a 1962 Triumph TR3A
On this vehicle, the steering system connects driver to road through the rack, pump, tie rods, and column components.
- Match the engine first. Every steering part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Power Steering Fluid and Steering Gear Housing Seal .
Frequently Asked Questions
How many steering parts fit the 1962 Triumph TR3A?
Our catalog currently lists 6 steering parts for the 1962 Triumph TR3A across 2 subcategories and 3 brands, covering both the 2.0L L4 and the 2.1L L4. Each part is matched to the engine(s) it fits.
Do steering parts differ between 1962 Triumph TR3A engines?
Yes. Every steering part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of steering problems on a 1962 Triumph TR3A?
Common symptoms include play or looseness on center, a whine when turning, fluid weeping from rack boots, or uneven tire wear on the front axle. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the inner and outer tie-rod ends together on higher-mileage vehicles, then get an alignment.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1962 Triumph TR3A was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1962 Triumph TR3A?
First match the engine — each row shows which engine(s) the part fits. Then flush old power-steering fluid when replacing a pump or rack — grit in the old fluid is the number-one cause of repeat failure. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1962 Triumph TR3A
Steering Parts for Other Triumph TR3A Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.