14 Ignition parts are listed for the 1969 Triumph Herald, in 4 part types, covering the 1.1L L4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 1969 Triumph Herald delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (9 parts), Condenser / Capacitor (3 parts) and Distributor Rotor (1 part). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 1.1L L4 — the only engine offered in the 1969 Triumph Herald.
The most listed brands for 1969 Triumph Herald ignition parts are STANDARD MOTOR PRODUCTS (6 parts), WELLS (2 parts) and FVP (1 part), plus 5 more brands. Quality grades include Economy and Standard Replacement.
2 parts on this 1969 Triumph Herald page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including STANDARD MOTOR PRODUCTS UC15T (Ignition Coil) and NGK 48863 (Ignition Coil). Click any part number to see every vehicle that part fits.
Condenser / Capacitor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU206 | 🇺🇸 US | View on Amazon | |
| WELLS | 5H1011 | 🇺🇸 US | View on Amazon |
This table covers the capacitors used in this electrical or A/C circuit.
3 Condenser / Capacitor parts are listed for the 1969 Triumph Herald, from STANDARD MOTOR PRODUCTS and WELLS.
In the Economy grade, STANDARD MOTOR PRODUCTS supplies 1 part: the catalog's value-priced group. A representative part number is STANDARD MOTOR PRODUCTS LU206T.
The Standard Replacement section lists 2 options from STANDARD MOTOR PRODUCTS and WELLS — built to original-equipment specification. STANDARD MOTOR PRODUCTS LU206 is listed in this group.
This group includes STANDARD MOTOR PRODUCTS LU206T, STANDARD MOTOR PRODUCTS LU206 and WELLS 5H1011.
Distributor Rotor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU300 | 🇺🇸 US | View on Amazon |
This table covers the Distributor rotors. Typical signs include shudder under braking, or a lip at the outer edge. Do not put new pads on a rotor that is below minimum thickness.
This group shows a single part: STANDARD MOTOR PRODUCTS LU300.
Ignition Breaker Points
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | LU1617P | 🇺🇸 US | View on Amazon |
This table covers the breaker points in a points-type distributor.
One part is listed for the 1969 Triumph Herald — STANDARD MOTOR PRODUCTS LU1617P.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UC15T | 🇺🇸 US | T-Series | View on Amazon |
| FVP | UC15F | 🇺🇸 US | View on Amazon | |
| HOLSTEIN | 2IGC0058 | 🇺🇸 US | View on Amazon | |
| SKP | SKUC15T | 🇺🇸 US | Coil Pack | View on Amazon |
| SPECTRA PREMIUM | C622 | 🇺🇸 US | Pack | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NGK Popular | 48863 | 🇺🇸 US | Connections May be Eyelet or Spade | View on Amazon |
| STANDARD MOTOR PRODUCTS | UC15 | 🇺🇸 US | View on Amazon | |
| UNITED MOTOR PRODUCTS | C15 | 🇺🇸 US | View on Amazon | |
| WELLS | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
9 Ignition Coil parts are listed for the 1969 Triumph Herald, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 5 other brands. STANDARD MOTOR PRODUCTS UC15T carries the "Popular" badge.
Economy: 5 parts, from STANDARD MOTOR PRODUCTS, FVP, HOLSTEIN and 2 other brands. A representative part number is STANDARD MOTOR PRODUCTS UC15T.
The Standard Replacement section: 4 options from NGK, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. NGK 48863 is listed in this group.
Listed part numbers: STANDARD MOTOR PRODUCTS UC15T, FVP UC15F and HOLSTEIN 2IGC0058, plus the other parts above.
Buying Ignition Parts for a 1969 Triumph Herald
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.1L L4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Condenser / Capacitor .
Frequently Asked Questions
How many ignition parts fit the 1969 Triumph Herald?
Our catalog currently lists 14 ignition parts for the 1969 Triumph Herald across 4 subcategories and 8 brands, covering the 1.1L L4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 1969 Triumph Herald?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Triumph Herald was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1969 Triumph Herald?
Every part on this page is matched to the 1.1L L4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1969 Triumph Herald
Ignition Parts for Other Triumph Herald Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.