1969 Triumph TR250 Engine Parts

Engine:
2.5L L6

The 1969 Triumph TR250 has 10 engine parts with verified fitment on this page — 6 part types and 4 brands, covering the 2.5L L6 engine. Each part includes a manufacturer part number and application notes.

On the 1969 Triumph TR250, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Piston Ring (4 parts), Expansion Plug (2 parts) and Crankshaft Repair Sleeve (1 part). The other 3 part types cover the remaining 3 parts.

Crankshaft Repair Sleeve

Brand Part Number Markets Notes Buy
SCHAEFFLER SR3511
🇺🇸 US
Frontwith 2.00 In Shaft
Fitment notes — SCHAEFFLER SR3511
Frontwith 2.00 In Shaft0.375 In Width
View on
Amazon

This table covers the sleeves used to restore a grooved crankshaft seal surface.

Crankshaft Seal

Brand Part Number Markets Notes Buy
SCHAEFFLER SS3046
🇺🇸 US
Front3.01" O.D. X 0.31" Width
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Expansion Plug

Brand Part Number Markets Notes Buy
MELLING MPE156BR
🇺🇸 US
Brass
View on
Amazon
MELLING MPE156R
🇺🇸 US
Steel
View on
Amazon

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Piston Ring

Brand Part Number Markets Notes Buy
HASTINGS MANUFACTURING 6817
🇺🇸 US
Full SetPlain Cast Top Ring
Fitment notes — HASTINGS MANUFACTURING 6817
Full SetPlain Cast Top RingTop Groove: 1/16 In2nd Groove: 1/16 In1ST Oil Groove: 5/32 InTop Ring Surface Treatment: Phosphate
Engine. Bore (In.): 2.940
View on
Amazon
HASTINGS MANUFACTURING 2C6817
🇺🇸 US
Full SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C6817
Full SetChrome Top RingTop Groove: 1/16 In2nd Groove: 1/16 In1ST Oil Groove: 5/32 InTop Ring Surface Treatment: Triple Chrome
Engine. Bore (In.): 2.940 (Size: Standard)
View on
Amazon
HASTINGS MANUFACTURING 2C6817S
🇺🇸 US
1 Cylinder SetChrome Top Ring
Fitment notes — HASTINGS MANUFACTURING 2C6817S
1 Cylinder SetChrome Top RingTop Groove: 1/16 In2nd Groove: 1/16 In1ST Oil Groove: 5/32 InTop Ring Surface Treatment: Triple Chrome
Engine. Bore (In.): 2.940 (Size: Standard)
View on
Amazon
HASTINGS MANUFACTURING 6817S
🇺🇸 US
1 Cylinder SetFor 2 Ring Piston
View on
Amazon

This table covers the rings that seal each piston to the cylinder wall.

Timing Cover Repair Sleeve

Brand Part Number Markets Notes Buy
SKF 99199
🇺🇸 US
Shaft Diameter: 2.000 In
View on
Amazon

This table covers the wear sleeves used to restore a Timing Cover seal surface.

Timing Cover Seal

Brand Part Number Markets Notes Buy
SKF 19993
🇺🇸 US
View on
Amazon

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Engine Parts for a 1969 Triumph TR250

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 2.5L L6 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Piston Ring and Expansion Plug .

Frequently Asked Questions

How many engine parts fit the 1969 Triumph TR250?

Our catalog currently lists 10 engine parts for the 1969 Triumph TR250 across 6 subcategories and 4 brands, covering the 2.5L L6 engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1969 Triumph TR250?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1969 Triumph TR250 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1969 Triumph TR250?

Every part on this page is matched to the 2.5L L6 engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1969 Triumph TR250

Engine Parts for Other Triumph TR250 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.