1972 Triumph Stag Electrical Parts

Engine:
3.0L V8

The 1972 Triumph Stag has 10 electrical parts with verified fitment on this page — 3 part types and 7 brands, covering the 3.0L V8 engine. Each part includes a manufacturer part number and application notes.

The electrical system on the 1972 Triumph Stag covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors. All 10 listed parts are Battery (5 parts), Alternator / Generator End Bearing (3 parts) and Alternator / Generator (2 parts).

Alternator / Generator

Brand Part Number Markets Notes Buy
FVP 15571
🇺🇸 US 🇨🇦 CA
Remanufactured
Fitment notes — FVP 15571
Remanufactured
45 Amps
View on
Amazon
PURE ENERGY 15571
🇺🇸 US 🇨🇦 CA
Remanufactured
Fitment notes — PURE ENERGY 15571
Remanufactured
45 Amps
View on
Amazon

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator.

Alternator / Generator End Bearing

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS RB6203
🇺🇸 US 🇨🇦 CA
Open Designwith Lucas Alternator
Fitment notes — WJB / INMOTION PARTS RB6203
Open Designwith Lucas Alternator16ACR Modelswith 34 Amps AlternatorDrive End
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA NB203
🇺🇸 US 🇨🇦 CA
34 Ampswith Lucas Alternator # 16ACR
Fitment notes — BCA NB203
34 Ampswith Lucas Alternator # 16ACRDrive End
View on
Amazon
NATIONAL 203
🇺🇸 US 🇨🇦 CA
Open Designwith Lucas Alternator
Fitment notes — NATIONAL 203
Open Designwith Lucas Alternatorwith 34 Amps Alternator16ACR ModelsDrive End
View on
Amazon

This table covers the bearings in the alternator housing. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.

Battery

Brand Part Number Markets Notes Buy
DEKA Popular 9A78DT
🇺🇸 US 🇨🇦 CA
IntimidatorAGM
Fitment notes — DEKA 9A78DT
IntimidatorAGMBCI Group 34/78750 CCALength X Width X Height: 10.75 In x 6.875 In x 8 In
Supplied adapter May be required For proper Fit.
View on
Amazon
DEKA 9A34
🇺🇸 US 🇨🇦 CA
IntimidatorAGM
Fitment notes — DEKA 9A34
IntimidatorAGMBCI Group 34750 CCALength X Width X Height: 10.75 In x 6.875 In x 7.75 In
View on
Amazon
EXIDE MX24
🇺🇸 US 🇨🇦 CA
Marathon MaxBCI Group 24
Fitment notes — EXIDE MX24
Marathon MaxBCI Group 24CCA: 700120 Minute Reserve Capacity(LxWxH) 10.19" x 6.75" x 8.63"
View on
Amazon
FVP P24AGM
🇺🇸 US 🇨🇦 CA
Platinum AGMBCI Group: 24
Fitment notes — FVP P24AGM
Platinum AGMBCI Group: 24CCA: 750140 Minute Reserve Capacity(LxWxH) 10.2" x 6.8" x 7.8"
View on
Amazon
FVP P24RAGM
🇺🇸 US 🇨🇦 CA
Platinum AGMBCI Group: 24
Fitment notes — FVP P24RAGM
Platinum AGMBCI Group: 24CCA: 750140 Minute Reserve Capacity(LxWxH) 10.2" x 6.8" x 7.8"
Reverse Terminal
View on
Amazon

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery.

Buying Electrical Parts for a 1972 Triumph Stag

On this vehicle, the electrical system covers charging, starting and the sensors and modules the vehicle relies on, from alternator and starter to oxygen sensors.

  • Confirm you have the 3.0L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Battery and Alternator / Generator End Bearing .

Frequently Asked Questions

How many electrical parts fit the 1972 Triumph Stag?

Our catalog currently lists 10 electrical parts for the 1972 Triumph Stag across 3 subcategories and 7 brands, covering the 3.0L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of electrical problems on a 1972 Triumph Stag?

Common symptoms include slow cranking on cold mornings, a battery light that flickers, dim lights at idle, or a check-engine code pointing at a sensor circuit. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, clean or renew the battery terminals and grounds with any charging-system repair.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1972 Triumph Stag was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1972 Triumph Stag?

Every part on this page is matched to the 3.0L V8 engine. Then test before replacing — a failed alternator and a bad ground can look identical, and sensors are frequently condemned for wiring faults. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1972 Triumph Stag

Electrical Parts for Other Triumph Stag Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.