1964 Abarth Simca Ignition Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

9 Ignition parts are listed for the 1964 Abarth Simca, in 2 part types, covering both the 1.3L L4 and the 2.0L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1964 Abarth Simca, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 9 listed parts are Spark Plug (5 parts) and Ignition Coil (4 parts).

Ignition Coil

Economy

Brand Part Number Markets Notes Buy
FVP Fits: all 1964 Simca engines UC15F
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: all 1964 Simca engines UC15T
🇺🇸 US
T-Series
Fitment notes — STANDARD MOTOR PRODUCTS UC15T
T-Series
with 12 Volt Systemwithout External Resistor
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 1964 Simca engines UC15
🇺🇸 US
with 12 Volt Systemwithout External Resistor
View on
Amazon
WELLS Fits: all 1964 Simca engines 5C1019
🇺🇸 US
Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil
View on
Amazon

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.

Spark Plug

Summary: Notes include pre-set gaps of 0.025" and 0.032". Both engines share the same gaps. Replacement brands in this table include CHAMPION.

Brand Part Number Markets Notes Buy
CHAMPION Popular Fits: all 1964 Simca engines 805
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 805
Copper PlusPre-Set Gap: 0.025"
3/4" Reach Spark PlugsNon-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: all 1964 Simca engines 807
🇺🇸 US
Copper PlusPre-Set Gap: 0.032"
Fitment notes — CHAMPION 807
Copper PlusPre-Set Gap: 0.032"
1/2" Reach Spark PlugsOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: all 1964 Simca engines 818
🇺🇸 US
Copper PlusPre-Set Gap: 0.025"
Fitment notes — CHAMPION 818
Copper PlusPre-Set Gap: 0.025"
3/4" Reach Spark PlugsResistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: all 1964 Simca engines 805C
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 805C
Copper Plus
3/4" Reach Spark PlugsNon-Resistor TypeOE-Recommended Gap: 0.025"
View on
Amazon
CHAMPION Fits: all 1964 Simca engines 818C
🇺🇸 US
Copper Plus
Fitment notes — CHAMPION 818C
Copper Plus
3/4" Reach Spark PlugsResistor TypeOE-Recommended Gap: 0.025"
View on
Amazon

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.

Buying Ignition Parts for a 1964 Abarth Simca

On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.

  • You do not need to pick an engine: every ignition part on this page fits both the 1.3L L4 and the 2.0L L4.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Spark Plug and Ignition Coil .

Frequently Asked Questions

How many ignition parts fit the 1964 Abarth Simca?

Our catalog currently lists 9 ignition parts for the 1964 Abarth Simca across 2 subcategories and 4 brands, covering both the 1.3L L4 and the 2.0L L4. Each part is matched to the engine(s) it fits.

Do ignition parts differ between 1964 Abarth Simca engines?

No. On this page every ignition part fits both the 1.3L L4 and the 2.0L L4. You do not need to pick an engine to choose the right row — use the notes for position and trim.

What are the signs of ignition problems on a 1964 Abarth Simca?

Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What spark-plug gap is listed for the 1964 Abarth Simca?

Notes on this page include pre-set gaps of 0.025" and 0.032". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.

What should I replace at the same time?

Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1964 Abarth Simca was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1964 Abarth Simca?

Every part on this page already fits both the 1.3L L4 and the 2.0L L4. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1964 Abarth Simca

Ignition Parts for Other Abarth Simca Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.