18 Ignition parts are listed for the 1967 Abarth Simca, in 2 part types, covering both the 1.3L L4 and the 2.0L L4. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 1967 Abarth Simca, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 18 listed parts are Spark Plug (14 parts) and Ignition Coil (4 parts).
The 1967 Abarth Simca was sold with both the 1.3L L4 and the 2.0L L4. 4 parts fit every engine; the other 14 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 1967 Abarth Simca ignition parts are CHAMPION (10 parts), ACDELCO (3 parts) and STANDARD MOTOR PRODUCTS (2 parts), plus 3 more brands. Quality grades include Copper / Nickel, Double Platinum and Economy.
3 parts on this 1967 Abarth Simca page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ACDELCO R42XLS (Spark Plug) and CHAMPION 415 (Spark Plug). Click any part number to see every vehicle that part fits.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Fits: all 1967 Simca engines | UC15F | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 1967 Simca engines | UC15T | 🇺🇸 US | T-Series | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 1967 Simca engines | UC15 | 🇺🇸 US | with 12 Volt Systemwithout External Resistor | View on Amazon |
| WELLS Fits: all 1967 Simca engines | 5C1019 | 🇺🇸 US | Used on most import products with 12 Volt system with Internal resistorUniversal 12 Volt Coil | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
4 Ignition Coil parts are listed for the 1967 Abarth Simca, from STANDARD MOTOR PRODUCTS, FVP and WELLS. All of them fit every engine offered in the 1967 Simca.
In the Economy grade, FVP and STANDARD MOTOR PRODUCTS supply 2 parts: the catalog's value-priced group. A representative part number is FVP UC15F.
The Standard Replacement section lists 2 options from STANDARD MOTOR PRODUCTS and WELLS — built to original-equipment specification. STANDARD MOTOR PRODUCTS UC15 is listed in this group.
Part numbers include FVP UC15F, STANDARD MOTOR PRODUCTS UC15T and STANDARD MOTOR PRODUCTS UC15, among others listed above.
Spark Plug
Summary: Notes include pre-set gaps of 0.025", 0.03", 0.032", 0.035" and 0.041". Replacement brands in this table include CHAMPION, ACDELCO and SKP.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 2.0L L4 | R42XLS | 🇺🇸 US 🇨🇦 CA | ProfessionalConventional | View on Amazon |
| CHAMPION Popular Fits: 2.0L L4 | 415 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: 2.0L L4 | 300 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: 2.0L L4 | 4151 | 🇺🇸 US | Copper PlusClassification: Champion Copper Plus Small Engine | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.0L L4 | 41804 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| CHAMPION Fits: 2.0L L4 | 7415 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
Iridium (lasts up to 4x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Fits: 2.0L L4 | 9804 | 🇺🇸 US | IridiumPre-Set Gap: 0.03" | View on Amazon |
| SKP Fits: 2.0L L4 | SP1041 | 🇺🇸 US | Tapered Ground Electrode with Platinum Chip | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.0L L4 | 4 | 🇺🇸 US 🇨🇦 CA | ProfessionalRapidfire | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular Fits: 1.3L L4 | 805 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: 1.3L L4 | 807 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: 1.3L L4 | 818 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.025" | View on Amazon |
| CHAMPION Fits: 1.3L L4 | 805C | 🇺🇸 US | Copper Plus | View on Amazon |
| CHAMPION Fits: 1.3L L4 | 818C | 🇺🇸 US | Copper Plus | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
14 Spark Plug parts for the 1967 Abarth Simca come from 3 brands — CHAMPION, ACDELCO and SKP. The "Popular" part is ACDELCO R42XLS.
The Copper / Nickel section lists 4 options from CHAMPION and ACDELCO — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. ACDELCO R42XLS is listed in this group.
The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 2 options from ACDELCO and CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 41804 is listed in this group.
In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, CHAMPION and SKP supply 2 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 9804.
The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from ACDELCO — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. ACDELCO 4 is listed in this group.
5 further parts sit outside the graded sections, with the same engine-level match.
Buying Ignition Parts for a 1967 Abarth Simca
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Some ignition parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Ignition Coil .
Frequently Asked Questions
How many ignition parts fit the 1967 Abarth Simca?
Our catalog currently lists 18 ignition parts for the 1967 Abarth Simca across 2 subcategories and 6 brands, covering both the 1.3L L4 and the 2.0L L4. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1967 Abarth Simca engines?
Some do. 4 parts fit every engine; the other 14 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1967 Abarth Simca?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1967 Abarth Simca?
Notes on this page include pre-set gaps of 0.025", 0.03", 0.032", 0.035" and 0.041". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1967 Abarth Simca was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1967 Abarth Simca?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1967 Abarth Simca
Ignition Parts for Other Abarth Simca Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.