2000 Acura NSX Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

4 Clutch Plate Pack parts for the 2000 Acura NSX come from RAYBESTOS POWERTRAIN. Every part fits both the 3.0L V6 and the 3.2L V6.

In the Friction Plate Pack grade, RAYBESTOS POWERTRAIN supplies 2 parts: grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN RCPS40.

The Steel Plate Pack section lists 2 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN STMHONDA17 is listed in this group.

Listed part numbers: RAYBESTOS POWERTRAIN RCPS40, RAYBESTOS POWERTRAIN RCP96167 and RAYBESTOS POWERTRAIN STMHONDA17, plus the other parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

10 Filter parts for the 2000 Acura NSX come from 5 brands — VARIOUS MFR, ATP, RAYBESTOS POWERTRAIN and 2 other brands. The "Popular" part is VARIOUS MFR PT1320.

The Economy section lists 4 options from VARIOUS MFR and PA CARGO — the catalog's value-priced group. VARIOUS MFR PT1320 is listed in this group.

In the Standard Replacement grade, ATP, RAYBESTOS POWERTRAIN and VAICO supply 3 parts: built to original-equipment specification. A representative part number is ATP JX154.

3 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Fluid Pan drain plugs. Read more

One part is listed for the 2000 Acura NSX — DORMAN 090178.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts are listed for the 2000 Acura NSX, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2000 NSX.

Listed part numbers: BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts for the 2000 Acura NSX come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Listed part numbers: BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483, plus the other parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts for the 2000 Acura NSX come from 3 brands — SKF, SCHAEFFLER and TIMKEN. Every part fits both the 3.0L V6 and the 3.2L V6.

Listed part numbers: SCHAEFFLER SS4434, SKF 16429 and SKF 16894, plus the other parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2000 Acura NSX — SCHAEFFLER 32207.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

One part is listed for the 2000 Acura NSX — SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts are listed for the 2000 Acura NSX, from SCHAEFFLER and SKF. All of them fit every engine offered in the 2000 NSX.

Part numbers include SCHAEFFLER SS2111 and SKF 4710.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

This group shows a single part: TC REMANUFACTURING HO22.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts are listed for the 2000 Acura NSX, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS. All of them fit every engine offered in the 2000 NSX.

Listed part numbers: NATIONAL 99181, SCHAEFFLER SR3501 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts are listed for the 2000 Acura NSX, from NATIONAL, TIMKEN and WJB / INMOTION PARTS. All of them fit every engine offered in the 2000 NSX.

Part numbers include NATIONAL 710238, NATIONAL 710868 and TIMKEN 224068, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

9 Transmission Fluid parts for the 2000 Acura NSX come from 4 brands — IDEMITSU, VALVOLINE, AISIN and 1 other brand. The "Popular" part is AISIN ATFDW1. 5 parts fit every engine; the other 4 are engine-specific.

In the DW-1 grade, AISIN supplies 1 part: grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. A representative part number is AISIN ATFDW1.

The Multi-Vehicle section lists 4 options from VALVOLINE and MOBIL — grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. VALVOLINE VV3246 is listed in this group.

The Type III (H) section lists 2 options from IDEMITSU — grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. IDEMITSU 30040090750 is listed in this group.

The Type T-4 (Type T-IV) section lists 2 options from IDEMITSU — grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. IDEMITSU 30040093750 is listed in this group.

Listed part numbers: AISIN ATFDW1, VALVOLINE VV3246 and MOBIL 126505, plus the other parts above.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts for the 2000 Acura NSX come from 2 brands — LUBEGARD and ATP. The "Popular" part is LUBEGARD 19610. Every part fits both the 3.0L V6 and the 3.2L V6.

This group includes LUBEGARD 19610, LUBEGARD 60902 and ATP AT203 and the remaining parts above.