2003 Acura NSX Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies the 4 Clutch Plate Pack parts for the 2003 Acura NSX.

The Friction Plate Pack section lists 2 options from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCPS40 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 2 parts: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMHONDA17.

This group includes RAYBESTOS POWERTRAIN RCPS40, RAYBESTOS POWERTRAIN RCP96167 and RAYBESTOS POWERTRAIN STMHONDA17 and the remaining parts above.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts are listed for the 2003 Acura NSX, from VARIOUS MFR, PA CARGO, ATP and 1 other brand. ATP B265 carries the "Popular" badge.

In the Economy grade, VARIOUS MFR and PA CARGO supply 3 parts: the catalog's value-priced group. A representative part number is PA CARGO 98710N.

The Standard Replacement section lists 2 options from ATP and PIONEER — built to original-equipment specification. ATP B265 is listed in this group.

Listed part numbers: ATP B265, PA CARGO 98710N and VARIOUS MFR PT1320, plus the other parts above.

This table covers the Fluid Cooler O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2003 Acura NSX — DORMAN 82562.

This table covers the Fluid Pan drain plugs. Read more

This group shows a single part: DORMAN 090178.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2003 Acura NSX come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

This group includes BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts are listed for the 2003 Acura NSX, from BCA, NATIONAL, SCHAEFFLER and 1 other brand.

Part numbers include BCA NS99157, NATIONAL 99157 and SCHAEFFLER SR3483, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Output Shaft Seal parts are listed for the 2003 Acura NSX, from TIMKEN, SKF and SCHAEFFLER. TIMKEN 223543 carries the "Popular" badge.

This group includes TIMKEN 223543, SCHAEFFLER SS4434 and SKF 16429 and the remaining parts above.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Shift Shaft Seal parts for the 2003 Acura NSX come from 2 brands — SCHAEFFLER and SKF.

Listed part numbers: SCHAEFFLER SS2111 and SKF 4710.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2003 Acura NSX — TC REMANUFACTURING HO22.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts for the 2003 Acura NSX come from 3 brands — NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

Listed part numbers: NATIONAL 99181, SCHAEFFLER SR3501 and WJB / INMOTION PARTS WS99181.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Torque Converter Shaft Seal parts for the 2003 Acura NSX come from 3 brands — NATIONAL, TIMKEN and WJB / INMOTION PARTS.

This group includes NATIONAL 710238, NATIONAL 710868 and TIMKEN 224068 and the remaining parts above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

12 Transmission Fluid parts are listed for the 2003 Acura NSX, from IDEMITSU, VALVOLINE, PENTOSIN and 3 other brands. AISIN ATFDW1 carries the "Popular" badge.

In the ATF +4 grade, PENTOSIN supplies 2 parts: grouped under the catalog's "ATF +4" designation — the notes column spells out what sets them apart. A representative part number is PENTOSIN 1058112.

The DW-1 section lists 1 option from AISIN — grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. AISIN ATFDW1 is listed in this group.

In the Multi-Vehicle grade, VALVOLINE and MOBIL supply 4 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

In the Type III (H) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type III (H)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040090750.

In the Type T-4 (Type T-IV) grade, IDEMITSU supplies 2 parts: grouped under the catalog's "Type T-4 (Type T-IV)" designation — the notes column spells out what sets them apart. A representative part number is IDEMITSU 30040093750.

In the Z-1 grade, BECK/ARNLEY supplies 1 part: grouped under the catalog's "Z-1" designation — the notes column spells out what sets them apart. A representative part number is BECK/ARNLEY 2522004.

This table covers the conditioners and additives used with this transmission fluid. Read more

9 Transmission Fluid Additive parts are listed for the 2003 Acura NSX, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Listed part numbers: LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, plus the other parts above.